Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig REGULATOR
3 bool "Voltage and Current Regulator Support"
4 select LINEAR_RANGES
5 help
6 Generic Voltage and Current Regulator support.
7
8 This framework is designed to provide a generic interface to voltage
9 and current regulators within the Linux kernel. It's intended to
10 provide voltage and current control to client or consumer drivers and
11 also provide status information to user space applications through a
12 sysfs interface.
13
14 The intention is to allow systems to dynamically control regulator
15 output in order to save power and prolong battery life. This applies
16 to both voltage regulators (where voltage output is controllable) and
17 current sinks (where current output is controllable).
18
19 This framework safely compiles out if not selected so that client
20 drivers can still be used in systems with no software controllable
21 regulators.
22
23 If unsure, say no.
24
25
26if REGULATOR
27
28config REGULATOR_DEBUG
29 bool "Regulator debug support"
30 help
31 Say yes here to enable debugging support.
32
33config REGULATOR_FIXED_VOLTAGE
34 tristate "Fixed voltage regulator support"
35 help
36 This driver provides support for fixed voltage regulators,
37 useful for systems which use a combination of software
38 managed regulators and simple non-configurable regulators.
39
40config REGULATOR_VIRTUAL_CONSUMER
41 tristate "Virtual regulator consumer support"
42 help
43 This driver provides a virtual consumer for the voltage and
44 current regulator API which provides sysfs controls for
45 configuring the supplies requested. This is mainly useful
46 for test purposes.
47
48 If unsure, say no.
49
50config REGULATOR_USERSPACE_CONSUMER
51 tristate "Userspace regulator consumer support"
52 help
53 There are some classes of devices that are controlled entirely
54 from user space. Userspace consumer driver provides ability to
55 control power supplies for such devices.
56
57 If unsure, say no.
58
59config REGULATOR_NETLINK_EVENTS
60 bool "Enable support for receiving regulator events via netlink"
61 depends on NET
62 help
63 Enabling this option allows the kernel to broadcast regulator events using
64 the netlink mechanism. User-space applications can subscribe to these events
65 for real-time updates on various regulator events.
66
67 If unsure, say no.
68
69config REGULATOR_88PG86X
70 tristate "Marvell 88PG86X voltage regulators"
71 depends on I2C
72 select REGMAP_I2C
73 help
74 This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
75 They provide two I2C-controlled DC/DC step-down converters with
76 sleep mode and separate enable pins.
77
78config REGULATOR_88PM800
79 tristate "Marvell 88PM800 Power regulators"
80 depends on MFD_88PM800
81 help
82 This driver supports Marvell 88PM800 voltage regulator chips.
83 It delivers digitally programmable output,
84 the voltage is programmed via I2C interface.
85 It's suitable to support PXA988 chips to control VCC_MAIN and
86 various voltages.
87
88config REGULATOR_88PM8607
89 tristate "Marvell 88PM8607 Power regulators"
90 depends on MFD_88PM860X=y
91 help
92 This driver supports 88PM8607 voltage regulator chips.
93
94config REGULATOR_88PM886
95 tristate "Marvell 88PM886 voltage regulators"
96 depends on MFD_88PM886_PMIC
97 help
98 This driver implements support for Marvell 88PM886 voltage regulators.
99
100config REGULATOR_ACT8865
101 tristate "Active-semi act8865 voltage regulator"
102 depends on I2C
103 depends on POWER_SUPPLY
104 select REGMAP_I2C
105 help
106 This driver controls a active-semi act8865 voltage output
107 regulator via I2C bus.
108
109config REGULATOR_ACT8945A
110 tristate "Active-semi ACT8945A voltage regulator"
111 depends on MFD_ACT8945A
112 help
113 This driver controls a active-semi ACT8945A voltage regulator
114 via I2C bus. The ACT8945A features three step-down DC/DC converters
115 and four low-dropout linear regulators, along with a ActivePath
116 battery charger.
117
118config REGULATOR_AD5398
119 tristate "Analog Devices AD5398/AD5821 regulators"
120 depends on I2C
121 help
122 This driver supports AD5398 and AD5821 current regulator chips.
123 If building into module, its name is ad5398.ko.
124
125config REGULATOR_ADP5055
126 tristate "Analog Devices ADP5055 Triple Buck Regulator"
127 depends on I2C
128 select REGMAP_I2C
129 help
130 This driver controls an Analog Devices ADP5055 with triple buck
131 regulators using an I2C interface.
132
133 Say M here if you want to include support for the regulator as a
134 module.
135
136config REGULATOR_ANATOP
137 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
138 depends on ARCH_MXC || COMPILE_TEST
139 depends on MFD_SYSCON
140 help
141 Say y here to support Freescale i.MX on-chip ANATOP LDOs
142 regulators. It is recommended that this option be
143 enabled on i.MX6 platform.
144
145config REGULATOR_AAT2870
146 tristate "AnalogicTech AAT2870 Regulators"
147 depends on MFD_AAT2870_CORE
148 help
149 If you have a AnalogicTech AAT2870 say Y to enable the
150 regulator driver.
151
152config REGULATOR_AB8500
153 bool "ST-Ericsson AB8500 Power Regulators"
154 depends on AB8500_CORE
155 help
156 This driver supports the regulators found on the ST-Ericsson mixed
157 signal AB8500 PMIC
158
159config REGULATOR_ARIZONA_LDO1
160 tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
161 depends on MFD_ARIZONA || MFD_MADERA
162 depends on SND_SOC
163 help
164 Support for the LDO1 regulators found on Cirrus Logic Madera codecs
165 and Wolfson Microelectronic Arizona codecs.
166
167config REGULATOR_ARIZONA_MICSUPP
168 tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
169 depends on MFD_ARIZONA || MFD_MADERA
170 depends on SND_SOC
171 help
172 Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
173 and Wolfson Microelectronic Arizona codecs
174 devices.
175
176config REGULATOR_ARM_SCMI
177 tristate "SCMI based regulator driver"
178 depends on ARM_SCMI_PROTOCOL && OF
179 help
180 This adds the regulator driver support for ARM platforms using SCMI
181 protocol for device voltage management.
182 This driver uses SCMI Message Protocol driver to interact with the
183 firmware providing the device Voltage functionality.
184
185config REGULATOR_AS3711
186 tristate "AS3711 PMIC"
187 depends on MFD_AS3711
188 help
189 This driver provides support for the voltage regulators on the
190 AS3711 PMIC
191
192config REGULATOR_AS3722
193 tristate "AMS AS3722 PMIC Regulators"
194 depends on MFD_AS3722
195 help
196 This driver provides support for the voltage regulators on the
197 AS3722 PMIC. This will enable support for all the software
198 controllable DCDC/LDO regulators.
199
200config REGULATOR_ATC260X
201 tristate "Actions Semi ATC260x PMIC Regulators"
202 depends on MFD_ATC260X
203 help
204 This driver provides support for the voltage regulators on the
205 ATC260x PMICs. This will enable support for all the software
206 controllable DCDC/LDO regulators.
207
208config REGULATOR_AW37503
209 tristate "Awinic AW37503 Dual Output Power regulators"
210 depends on I2C && GPIOLIB
211 select REGMAP_I2C
212 help
213 This driver supports AW37503 single inductor - dual output
214 power supply specifically designed for display panels.
215
216config REGULATOR_AXP20X
217 tristate "X-POWERS AXP20X PMIC Regulators"
218 depends on MFD_AXP20X
219 help
220 This driver provides support for the voltage regulators on the
221 AXP20X PMIC.
222
223config REGULATOR_BCM590XX
224 tristate "Broadcom BCM590xx PMU Regulators"
225 depends on MFD_BCM590XX
226 help
227 This driver provides support for the voltage regulators on the
228 BCM590xx PMUs. This will enable support for the software
229 controllable LDO/Switching regulators.
230
231config REGULATOR_BD71815
232 tristate "ROHM BD71815 Power Regulator"
233 depends on MFD_ROHM_BD71828
234 select REGULATOR_ROHM
235 help
236 This driver supports voltage regulators on ROHM BD71815 PMIC.
237 This will enable support for the software controllable buck
238 and LDO regulators and a current regulator for LEDs.
239
240 This driver can also be built as a module. If so, the module
241 will be called bd71815-regulator.
242
243config REGULATOR_BD71828
244 tristate "ROHM BD71828, BD72720 and BD73900 Power Regulators"
245 depends on MFD_ROHM_BD71828
246 select REGULATOR_ROHM
247 help
248 This driver supports voltage regulators on ROHM BD71828,
249 BD71879, BD72720 and BD73900 PMICs. This will enable
250 support for the software controllable buck and LDO regulators.
251
252 This driver can also be built as a module. If so, the module
253 will be called bd71828-regulator.
254
255config REGULATOR_BD718XX
256 tristate "ROHM BD71837 Power Regulator"
257 depends on MFD_ROHM_BD718XX
258 select REGULATOR_ROHM
259 help
260 This driver supports voltage regulators on ROHM BD71837 PMIC.
261 This will enable support for the software controllable buck
262 and LDO regulators.
263
264 This driver can also be built as a module. If so, the module
265 will be called bd718x7-regulator.
266
267config REGULATOR_BD9571MWV
268 tristate "ROHM BD9571MWV Regulators"
269 depends on MFD_BD9571MWV
270 help
271 This driver provides support for the voltage regulators on the
272 ROHM BD9571MWV PMIC. This will enable support for the software
273 controllable regulator and voltage sampling units.
274
275 This driver can also be built as a module. If so, the module
276 will be called bd9571mwv-regulator.
277
278config REGULATOR_BD957XMUF
279 tristate "ROHM BD9576MUF and BD9573MUF Regulators"
280 depends on MFD_ROHM_BD957XMUF
281 help
282 This driver supports voltage regulators on ROHM BD9576MUF and
283 BD9573MUF PMICs.
284
285 This driver can also be built as a module. If so, the module
286 will be called bd9576-regulator.
287
288config REGULATOR_BD96801
289 tristate "ROHM BD96801 Power Regulator"
290 depends on MFD_ROHM_BD96801
291 select REGULATOR_ROHM
292 help
293 This driver supports voltage regulators on ROHM BD96801 PMIC.
294 This will enable support for the software controllable buck
295 and LDO regulators.
296
297 This driver can also be built as a module. If so, the module
298 will be called bd96801-regulator.
299
300config REGULATOR_BQ257XX
301 tristate "TI BQ257XX regulator family"
302 depends on MFD_BQ257XX
303 depends on GPIOLIB || COMPILE_TEST
304 help
305 Say Y to enable support for the boost regulator function of
306 the BQ257XX family of charger circuits.
307
308config REGULATOR_CPCAP
309 tristate "Motorola CPCAP regulator"
310 depends on MFD_CPCAP
311 help
312 Say y here for CPCAP regulator found on some Motorola phones
313 and tablets such as Droid 4.
314
315config REGULATOR_CROS_EC
316 tristate "ChromeOS EC regulators"
317 depends on CROS_EC && OF
318 help
319 This driver supports voltage regulators that is connected to ChromeOS
320 EC and controlled through EC host commands.
321
322 This driver can also be built as a module. If so, the module
323 will be called cros-ec-regulator.
324
325config REGULATOR_DA903X
326 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
327 depends on PMIC_DA903X
328 depends on !CC_IS_CLANG # https://llvm.org/pr38789
329 help
330 Say y here to support the BUCKs and LDOs regulators found on
331 Dialog Semiconductor DA9030/DA9034 PMIC.
332
333config REGULATOR_DA9052
334 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
335 depends on PMIC_DA9052
336 help
337 This driver supports the voltage regulators of DA9052-BC and
338 DA9053-AA/Bx PMIC.
339
340config REGULATOR_DA9055
341 tristate "Dialog Semiconductor DA9055 regulators"
342 depends on MFD_DA9055
343 help
344 Say y here to support the BUCKs and LDOs regulators found on
345 Dialog Semiconductor DA9055 PMIC.
346
347 This driver can also be built as a module. If so, the module
348 will be called da9055-regulator.
349
350config REGULATOR_DA9062
351 tristate "Dialog Semiconductor DA9061/62 regulators"
352 depends on MFD_DA9062
353 help
354 Say y here to support the BUCKs and LDOs regulators found on
355 DA9061 and DA9062 PMICs.
356
357 This driver can also be built as a module. If so, the module
358 will be called da9062-regulator.
359
360config REGULATOR_DA9063
361 tristate "Dialog Semiconductor DA9063 regulators"
362 depends on MFD_DA9063 && OF
363 help
364 Say y here to support the BUCKs and LDOs regulators found on
365 DA9063 PMICs.
366
367 This driver can also be built as a module. If so, the module
368 will be called da9063-regulator.
369
370config REGULATOR_DA9121
371 tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator"
372 depends on I2C && OF
373 select REGMAP_I2C
374 help
375 Say y here to support for the Dialog Semiconductor DA9121. The
376 DA9121 is a single channel dual-phase buck converter controlled
377 through an I2C interface.
378
379 DA9121 Single-channel dual-phase 10A buck converter
380 DA9130 Single-channel dual-phase 10A buck converter (Automotive)
381 DA9217 Single-channel dual-phase 6A buck converter
382 DA9122 Dual-channel single-phase 5A buck converter
383 DA9131 Dual-channel single-phase 5A buck converter (Automotive)
384 DA9220 Dual-channel single-phase 3A buck converter
385 DA9132 Dual-channel single-phase 3A buck converter (Automotive)
386
387 This driver can also be built as a module. If so, the module
388 will be called da9121-regulator.
389
390config REGULATOR_DA9210
391 tristate "Dialog Semiconductor DA9210 regulator"
392 depends on I2C
393 select REGMAP_I2C
394 help
395 Say y here to support for the Dialog Semiconductor DA9210.
396 The DA9210 is a multi-phase synchronous step down
397 converter 12A DC-DC Buck controlled through an I2C
398 interface.
399
400config REGULATOR_DA9211
401 tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
402 depends on I2C
403 select REGMAP_I2C
404 help
405 Say y here to support for the Dialog Semiconductor DA9211/DA9212
406 /DA9213/DA9214/DA9215.
407 The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
408 step down converter 12A or 16A DC-DC Buck controlled through an I2C
409 interface.
410
411config REGULATOR_DBX500_PRCMU
412 bool
413
414config REGULATOR_DB8500_PRCMU
415 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
416 depends on MFD_DB8500_PRCMU
417 select REGULATOR_DBX500_PRCMU
418 help
419 This driver supports the voltage domain regulators controlled by the
420 DB8500 PRCMU
421
422config REGULATOR_FAN53555
423 tristate "Fairchild FAN53555 Regulator"
424 depends on I2C
425 select REGMAP_I2C
426 help
427 This driver supports Fairchild FAN53555 Digitally Programmable
428 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
429 regulator that delivers a digitally programmable output from an
430 input voltage supply of 2.5V to 5.5V. The output voltage is
431 programmed through an I2C interface.
432
433config REGULATOR_FAN53880
434 tristate "Fairchild FAN53880 Regulator"
435 depends on I2C && OF
436 select REGMAP_I2C
437 help
438 This driver supports Fairchild (ON Semiconductor) FAN53880
439 regulator. The regulator is a programmable power management IC
440 (PMIC), it is controlled by I2C and provides one BUCK, one BOOST
441 and four LDO outputs.
442
443config REGULATOR_GPIO
444 tristate "GPIO regulator support"
445 depends on GPIOLIB || COMPILE_TEST
446 help
447 This driver provides support for regulators that can be
448 controlled via gpios.
449 It is capable of supporting current and voltage regulators
450 and the platform has to provide a mapping of GPIO-states
451 to target volts/amps.
452
453config REGULATOR_HI6421
454 tristate "HiSilicon Hi6421 PMIC voltage regulator support"
455 depends on MFD_HI6421_PMIC && OF
456 help
457 This driver provides support for the voltage regulators on the
458 HiSilicon Hi6421 PMU / Codec IC.
459 Hi6421 is a multi-function device which, on regulator part, provides
460 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
461 of them come with support to either ECO (idle) or sleep mode.
462
463config REGULATOR_HI6421V530
464 tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
465 depends on MFD_HI6421_PMIC && OF
466 help
467 This driver provides support for the voltage regulators on
468 HiSilicon Hi6421v530 PMU / Codec IC.
469 Hi6421v530 is a multi-function device which, on regulator part,
470 provides 5 general purpose LDOs, and all of them come with support
471 to either ECO (idle) or sleep mode.
472
473config REGULATOR_HI655X
474 tristate "Hisilicon HI655X PMIC regulators support"
475 depends on ARCH_HISI || COMPILE_TEST
476 depends on MFD_HI655X_PMIC && OF
477 help
478 This driver provides support for the voltage regulators of the
479 Hisilicon Hi655x PMIC device.
480
481config REGULATOR_HI6421V600
482 tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
483 depends on MFD_HI6421_SPMI && OF
484 select REGMAP
485 help
486 This driver provides support for the voltage regulators on
487 HiSilicon Hi6421v600 PMU / Codec IC.
488 This is used on Kirin 3670 boards, like HiKey 970.
489
490config REGULATOR_ISL9305
491 tristate "Intersil ISL9305 regulator"
492 depends on I2C
493 select REGMAP_I2C
494 help
495 This driver supports ISL9305 voltage regulator chip.
496
497config REGULATOR_ISL6271A
498 tristate "Intersil ISL6271A Power regulator"
499 depends on I2C
500 help
501 This driver supports ISL6271A voltage regulator chip.
502
503config REGULATOR_FP9931
504 tristate "FitiPower FP9931/JD9930 EPD regulator"
505 depends on I2C
506 select REGMAP_I2C
507 help
508 This driver supports the FP9931/JD9930 voltage regulator chip
509 which is used to provide power to Electronic Paper Displays
510 so it is found in E-Book readers.
511 If HWMON is enabled, it also provides temperature measurement.
512
513config REGULATOR_LM363X
514 tristate "TI LM363X voltage regulators"
515 depends on MFD_TI_LMU
516 help
517 This driver supports LM3631, LM3632 and LM36274 voltage regulators for
518 the LCD bias.
519 One boost output voltage is configurable and always on.
520 Other LDOs are used for the display module.
521
522config REGULATOR_LOCHNAGAR
523 tristate "Cirrus Logic Lochnagar regulator driver"
524 depends on MFD_LOCHNAGAR
525 help
526 This enables regulator support on the Cirrus Logic Lochnagar audio
527 development board.
528
529config REGULATOR_LP3971
530 tristate "National Semiconductors LP3971 PMIC regulator driver"
531 depends on I2C
532 help
533 Say Y here to support the voltage regulators and convertors
534 on National Semiconductors LP3971 PMIC
535
536config REGULATOR_LP3972
537 tristate "National Semiconductors LP3972 PMIC regulator driver"
538 depends on I2C
539 help
540 Say Y here to support the voltage regulators and convertors
541 on National Semiconductors LP3972 PMIC
542
543config REGULATOR_LP872X
544 tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
545 depends on I2C
546 select REGMAP_I2C
547 help
548 This driver supports LP8720/LP8725 PMIC
549
550config REGULATOR_LP873X
551 tristate "TI LP873X Power regulators"
552 depends on MFD_TI_LP873X && OF
553 help
554 This driver supports LP873X voltage regulator chips. LP873X
555 provides two step-down converters and two general-purpose LDO
556 voltage regulators. It supports software based voltage control
557 for different voltage domains
558
559config REGULATOR_LP8755
560 tristate "TI LP8755 High Performance PMU driver"
561 depends on I2C
562 select REGMAP_I2C
563 help
564 This driver supports LP8755 High Performance PMU driver. This
565 chip contains six step-down DC/DC converters which can support
566 9 mode multiphase configuration.
567
568config REGULATOR_LP87565
569 tristate "TI LP87565 Power regulators"
570 depends on MFD_TI_LP87565 && OF
571 help
572 This driver supports LP87565 voltage regulator chips. LP87565
573 provides four step-down converters. It supports software based
574 voltage control for different voltage domains
575
576config REGULATOR_LP8788
577 tristate "TI LP8788 Power Regulators"
578 depends on MFD_LP8788
579 help
580 This driver supports LP8788 voltage regulator chip.
581
582config REGULATOR_LTC3589
583 tristate "LTC3589 8-output voltage regulator"
584 depends on I2C
585 select REGMAP_I2C
586 help
587 This enables support for the LTC3589, LTC3589-1, and LTC3589-2
588 8-output regulators controlled via I2C.
589
590config REGULATOR_LTC3676
591 tristate "LTC3676 8-output voltage regulator"
592 depends on I2C
593 select REGMAP_I2C
594 help
595 This enables support for the LTC3676
596 8-output regulators controlled via I2C.
597
598config REGULATOR_MAX14577
599 tristate "Maxim 14577/77836 regulator"
600 depends on MFD_MAX14577
601 help
602 This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
603 The MAX14577 regulators include safeout LDO and charger current
604 regulator. The MAX77836 has two additional LDOs.
605
606config REGULATOR_MAX1586
607 tristate "Maxim 1586/1587 voltage regulator"
608 depends on I2C
609 help
610 This driver controls a Maxim 1586 or 1587 voltage output
611 regulator via I2C bus. The provided regulator is suitable
612 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
613
614config REGULATOR_MAX5970
615 tristate "Maxim 5970/5978 power switch and monitor"
616 depends on I2C
617 depends on OF
618 depends on MFD_MAX5970
619 help
620 This driver controls a Maxim 5970/5978 switch via I2C bus.
621 The MAX5970/5978 is a smart switch with no output regulation, but
622 fault protection and voltage and current monitoring capabilities.
623
624config REGULATOR_MAX77503
625 tristate "Analog Devices MAX77503 Regulator"
626 depends on I2C
627 select REGMAP_I2C
628 help
629 This driver controls a Analog Devices MAX77503 14V input, 1.5A
630 high-efficiency buck converter via I2C bus.
631 Say M here if you want to include support for the regulator as a
632 module.
633
634config REGULATOR_MAX77541
635 tristate "Analog Devices MAX77541/77540 Regulator"
636 depends on MFD_MAX77541
637 help
638 This driver controls a Analog Devices MAX77541/77540 regulators
639 via I2C bus. Both MAX77540 and MAX77541 are dual-phase
640 high-efficiency buck converter. Say Y here to
641 enable the regulator driver.
642 Say M here if you want to include support for the regulator as a
643 module.
644
645config REGULATOR_MAX77620
646 tristate "Maxim 77620/MAX20024 voltage regulator"
647 depends on MFD_MAX77620 || COMPILE_TEST
648 help
649 This driver controls Maxim MAX77620 voltage output regulator
650 via I2C bus. The provided regulator is suitable for Tegra
651 chip to control Step-Down DC-DC and LDOs. Say Y here to
652 enable the regulator driver.
653
654config REGULATOR_MAX77650
655 tristate "Maxim MAX77650/77651 regulator support"
656 depends on MFD_MAX77650 || COMPILE_TEST
657 help
658 Regulator driver for MAX77650/77651 PMIC from Maxim
659 Semiconductor. This device has a SIMO with three independent
660 power rails and an LDO.
661
662config REGULATOR_MAX77675
663 tristate "Maxim MAX77675 regulator driver"
664 depends on I2C && OF
665 select REGMAP_I2C
666 help
667 This driver controls the Maxim MAX77675 power regulator via I2C.
668 It supports four programmable buck-boost outputs.
669 Say Y here to enable the regulator driver
670
671config REGULATOR_MAX77857
672 tristate "ADI MAX77857/MAX77831 regulator support"
673 depends on I2C
674 select REGMAP_I2C
675 help
676 This driver controls a ADI MAX77857 and MAX77831 regulators.
677 via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost
678 converters with input voltage range (2.5V to 16V). Say Y here to
679 enable the regulator driver
680
681config REGULATOR_MAX8649
682 tristate "Maxim 8649 voltage regulator"
683 depends on I2C
684 select REGMAP_I2C
685 help
686 This driver controls a Maxim 8649 voltage output regulator via
687 I2C bus.
688
689config REGULATOR_MAX8660
690 tristate "Maxim 8660/8661 voltage regulator"
691 depends on I2C
692 help
693 This driver controls a Maxim 8660/8661 voltage output
694 regulator via I2C bus.
695
696config REGULATOR_MAX8893
697 tristate "Maxim 8893 voltage regulator"
698 depends on I2C
699 select REGMAP_I2C
700 help
701 This driver controls a Maxim 8893 voltage output
702 regulator via I2C bus.
703
704config REGULATOR_MAX8907
705 tristate "Maxim 8907 voltage regulator"
706 depends on MFD_MAX8907 || COMPILE_TEST
707 help
708 This driver controls a Maxim 8907 voltage output regulator
709 via I2C bus. The provided regulator is suitable for Tegra
710 chip to control Step-Down DC-DC and LDOs.
711
712config REGULATOR_MAX8925
713 tristate "Maxim MAX8925 Power Management IC"
714 depends on MFD_MAX8925
715 help
716 Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
717
718config REGULATOR_MAX8952
719 tristate "Maxim MAX8952 Power Management IC"
720 depends on I2C
721 help
722 This driver controls a Maxim 8952 voltage output regulator
723 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
724 modes ranging from 0.77V to 1.40V by 0.01V steps.
725
726config REGULATOR_MAX8973
727 tristate "Maxim MAX8973A voltage regulator"
728 depends on I2C
729 depends on THERMAL && THERMAL_OF
730 select REGMAP_I2C
731 help
732 The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down
733 switching regulator delivers up to 9A of output current. Each
734 phase operates at a 2MHz fixed frequency with a 120 deg shift
735 from the adjacent phase, allowing the use of small magnetic component.
736
737config REGULATOR_MAX8997
738 tristate "Maxim 8997/8966 regulator"
739 depends on MFD_MAX8997
740 help
741 This driver controls a Maxim 8997/8966 regulator
742 via I2C bus. The provided regulator is suitable for S5PC110,
743 S5PV210, and Exynos-4 chips to control VCC_CORE and
744 VCC_USIM voltages.
745
746config REGULATOR_MAX8998
747 tristate "Maxim 8998 voltage regulator"
748 depends on MFD_MAX8998
749 help
750 This driver controls a Maxim 8998 voltage output regulator
751 via I2C bus. The provided regulator is suitable for S3C6410
752 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
753
754config REGULATOR_MAX20086
755 tristate "Maxim MAX20086-MAX20089 Camera Power Protectors"
756 depends on I2C
757 select REGMAP_I2C
758 help
759 This driver controls a Maxim MAX20086-MAX20089 camera power
760 protectorvia I2C bus. The regulator has 2 or 4 outputs depending on
761 the device model. This driver is only capable to turn on/off them.
762
763config REGULATOR_MAX20411
764 tristate "Maxim MAX20411 High-Efficiency Single Step-Down Converter"
765 depends on I2C
766 select REGMAP_I2C
767 help
768 This driver controls the Maxim MAX20411 family of high-efficiency,
769 syncrhonous step-down converters.
770
771config REGULATOR_MAX77686
772 tristate "Maxim 77686 regulator"
773 depends on MFD_MAX77686 || COMPILE_TEST
774 help
775 This driver controls a Maxim 77686 regulator
776 via I2C bus. The provided regulator is suitable for
777 Exynos-4 chips to control VARM and VINT voltages.
778
779config REGULATOR_MAX77693
780 tristate "Maxim 77693/77843 regulator"
781 depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST
782 help
783 This driver controls a Maxim 77693/77843 regulators via I2C bus.
784 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
785 and one current regulator 'CHARGER'. This is suitable for
786 Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
787
788config REGULATOR_MAX77802
789 tristate "Maxim 77802 regulator"
790 depends on MFD_MAX77686 || COMPILE_TEST
791 help
792 This driver controls a Maxim 77802 regulator
793 via I2C bus. The provided regulator is suitable for
794 Exynos5420/Exynos5800 SoCs to control various voltages.
795 It includes support for control of voltage and ramp speed.
796
797config REGULATOR_MAX77826
798 tristate "Maxim 77826 regulator"
799 depends on I2C
800 select REGMAP_I2C
801 help
802 This driver controls a Maxim 77826 regulator via I2C bus.
803 The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
804 It includes support for control of output voltage. This
805 regulator is found on the Samsung Galaxy S5 (klte) smartphone.
806
807config REGULATOR_MAX77838
808 tristate "Maxim 77838 regulator"
809 depends on I2C
810 select REGMAP_I2C
811 help
812 This driver controls a Maxim 77838 regulator via I2C bus.
813 The regulator include 4 LDOs and a BUCK regulator. It's
814 present on the Samsung Galaxy S7 lineup of smartphones.
815
816config REGULATOR_MC13XXX_CORE
817 tristate
818
819config REGULATOR_MC13783
820 tristate "Freescale MC13783 regulator driver"
821 depends on MFD_MC13XXX
822 select REGULATOR_MC13XXX_CORE
823 help
824 Say y here to support the regulators found on the Freescale MC13783
825 PMIC.
826
827config REGULATOR_MC13892
828 tristate "Freescale MC13892 regulator driver"
829 depends on MFD_MC13XXX
830 select REGULATOR_MC13XXX_CORE
831 help
832 Say y here to support the regulators found on the Freescale MC13892
833 PMIC.
834
835config REGULATOR_MCP16502
836 tristate "Microchip MCP16502 PMIC"
837 depends on I2C && OF
838 select REGMAP_I2C
839 help
840 Say y here to support the MCP16502 PMIC. This driver supports
841 basic operations (get/set voltage, get/set operating mode)
842 through the regulator interface. In addition it enables
843 suspend-to-ram/standby transition.
844
845config REGULATOR_MP5416
846 tristate "Monolithic MP5416 PMIC"
847 depends on I2C && OF
848 select REGMAP_I2C
849 help
850 Say y here to support the MP5416 PMIC. This will enable supports
851 the software controllable 4 buck and 4 LDO regulators.
852 Say M here if you want to include support for the regulator as a
853 module.
854
855config REGULATOR_MP8859
856 tristate "MPS MP8859 regulator driver"
857 depends on I2C
858 select REGMAP_I2C
859 help
860 Say y here to support the MP8859 voltage regulator. This driver
861 supports basic operations (get/set voltage) through the regulator
862 interface.
863 Say M here if you want to include support for the regulator as a
864 module. The module will be named "mp8859".
865
866config REGULATOR_MP886X
867 tristate "MPS MP8869 regulator driver"
868 depends on I2C && OF
869 select REGMAP_I2C
870 help
871 This driver supports the MP8869 voltage regulator.
872
873config REGULATOR_MPQ7920
874 tristate "Monolithic MPQ7920 PMIC"
875 depends on I2C && OF
876 select REGMAP_I2C
877 help
878 Say y here to support the MPQ7920 PMIC. This will enable supports
879 the software controllable 4 buck and 5 LDO regulators.
880 This driver supports the control of different power rails of device
881 through regulator interface.
882
883config REGULATOR_MT6311
884 tristate "MediaTek MT6311 PMIC"
885 depends on I2C
886 select REGMAP_I2C
887 help
888 Say y here to select this option to enable the power regulator of
889 MediaTek MT6311 PMIC.
890 This driver supports the control of different power rails of device
891 through regulator interface.
892
893config REGULATOR_MT6315
894 tristate "MediaTek MT6315 PMIC"
895 depends on SPMI
896 select REGMAP_SPMI
897 help
898 Say y here to select this option to enable the power regulator of
899 MediaTek MT6315 PMIC.
900 This driver supports the control of different power rails of device
901 through regulator interface.
902
903config REGULATOR_MT6316
904 tristate "MT6316 SPMI PMIC regulator driver"
905 depends on SPMI
906 select REGMAP_SPMI
907 help
908 Say Y here to enable support for 2+2, 3+1 and 4 phase regulators
909 found in the MediaTek MT6316 BP, CP, DP, HP, VP and TP SPMI PMICs.
910 This driver supports the control of different power rails of device
911 through regulator interface.
912
913config REGULATOR_MT6323
914 tristate "MediaTek MT6323 PMIC"
915 depends on MFD_MT6397
916 help
917 Say y here to select this option to enable the power regulator of
918 MediaTek MT6323 PMIC.
919 This driver supports the control of different power rails of device
920 through regulator interface.
921
922config REGULATOR_MT6331
923 tristate "MediaTek MT6331 PMIC"
924 depends on MFD_MT6397
925 help
926 Say y here to select this option to enable the power regulator of
927 MediaTek MT6331 PMIC.
928 This driver supports the control of different power rails of device
929 through regulator interface
930
931config REGULATOR_MT6332
932 tristate "MediaTek MT6332 PMIC"
933 depends on MFD_MT6397
934 help
935 Say y here to select this option to enable the power regulator of
936 MediaTek MT6332 PMIC.
937 This driver supports the control of different power rails of device
938 through regulator interface
939
940config REGULATOR_MT6357
941 tristate "MediaTek MT6357 PMIC"
942 depends on MFD_MT6397
943 help
944 Say y here to select this option to enable the power regulator of
945 MediaTek MT6357 PMIC.
946 This driver supports the control of different power rails of device
947 through regulator interface.
948
949config REGULATOR_MT6358
950 tristate "MediaTek MT6358 PMIC"
951 depends on MFD_MT6397
952 help
953 Say y here to select this option to enable the power regulator of
954 MediaTek MT6358 PMIC.
955 This driver supports the control of different power rails of device
956 through regulator interface.
957
958config REGULATOR_MT6359
959 tristate "MediaTek MT6359 PMIC"
960 depends on MFD_MT6397
961 help
962 Say y here to select this option to enable the power regulator of
963 MediaTek MT6359 PMIC.
964 This driver supports the control of different power rails of device
965 through regulator interface.
966
967config REGULATOR_MT6360
968 tristate "MT6360 SubPMIC Regulator"
969 depends on MFD_MT6360
970 help
971 Say Y here to enable MT6360 regulator support.
972 This is support MT6360 PMIC/LDO part include
973 2-channel buck with Thermal Shutdown and Overload Protection
974 6-channel High PSRR and Low Dropout LDO.
975
976config REGULATOR_MT6363
977 tristate "MT6363 SPMI PMIC regulator driver"
978 depends on SPMI
979 select REGMAP_SPMI
980 help
981 Say Y here to enable support for regulators found in the MediaTek
982 MT6363 SPMI PMIC.
983 This driver supports the control of different power rails of device
984 through regulator interface.
985
986config REGULATOR_MT6370
987 tristate "MT6370 SubPMIC Regulator"
988 depends on MFD_MT6370
989 help
990 Say Y here to enable MT6370 regulator support.
991 This driver supports the control for DisplayBias voltages and one
992 general purpose LDO which is commonly used to drive the vibrator.
993
994config REGULATOR_MT6380
995 tristate "MediaTek MT6380 PMIC"
996 depends on MTK_PMIC_WRAP
997 help
998 Say y here to select this option to enable the power regulator of
999 MediaTek MT6380 PMIC.
1000 This driver supports the control of different power rails of device
1001 through regulator interface.
1002
1003config REGULATOR_MT6397
1004 tristate "MediaTek MT6397 PMIC"
1005 depends on MFD_MT6397
1006 help
1007 Say y here to select this option to enable the power regulator of
1008 MediaTek MT6397 PMIC.
1009 This driver supports the control of different power rails of device
1010 through regulator interface.
1011
1012config REGULATOR_MTK_DVFSRC
1013 tristate "MediaTek DVFSRC regulator driver"
1014 depends on MTK_DVFSRC
1015 help
1016 Say y here to control regulator by DVFSRC (dynamic voltage
1017 and frequency scaling resource collector).
1018 This driver supports to control regulators via the DVFSRC
1019 of Mediatek. It allows for voting on regulator state
1020 between multiple users.
1021
1022config REGULATOR_PALMAS
1023 tristate "TI Palmas PMIC Regulators"
1024 depends on MFD_PALMAS
1025 help
1026 If you wish to control the regulators on the Palmas series of
1027 chips say Y here. This will enable support for all the software
1028 controllable SMPS/LDO regulators.
1029
1030 The regulators available on Palmas series chips vary depending
1031 on the muxing. This is handled automatically in the driver by
1032 reading the mux info from OTP.
1033
1034config REGULATOR_PBIAS
1035 tristate "PBIAS OMAP regulator driver"
1036 depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
1037 help
1038 Say y here to support pbias regulator for mmc1:SD card i/o
1039 on OMAP SoCs.
1040 This driver provides support for OMAP pbias modelled
1041 regulators.
1042
1043config REGULATOR_PCA9450
1044 tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
1045 depends on I2C
1046 select REGMAP_I2C
1047 help
1048 Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
1049 regulator driver.
1050
1051config REGULATOR_PF9453
1052 tristate "NXP PF9453 regulator driver"
1053 depends on I2C
1054 select REGMAP_I2C
1055 help
1056 Say y here to support the NXP PF9453 PMIC regulator driver.
1057
1058config REGULATOR_PCAP
1059 tristate "Motorola PCAP2 regulator driver"
1060 depends on EZX_PCAP
1061 help
1062 This driver provides support for the voltage regulators of the
1063 PCAP2 PMIC.
1064
1065config REGULATOR_PF0900
1066 tristate "NXP PF0900/PF0901/PF09XX regulator driver"
1067 depends on I2C
1068 select REGMAP_I2C
1069 help
1070 Say y here to support the NXP PF0900/PF0901/PF09XX PMIC
1071 regulator driver.
1072
1073config REGULATOR_PF530X
1074 tristate "NXP PF5300/PF5301/PF5302 regulator driver"
1075 depends on I2C && OF
1076 select REGMAP_I2C
1077 help
1078 Say y here to support the regulators found on the NXP
1079 PF5300/PF5301/PF5302 PMIC.
1080
1081 Say M here if you want to support for the regulators found
1082 on the NXP PF5300/PF5301/PF5302 PMIC. The module will be named
1083 "pf530x-regulator".
1084
1085config REGULATOR_PF8X00
1086 tristate "NXP PF8100/PF8121A/PF8200 regulator driver"
1087 depends on I2C && OF
1088 select REGMAP_I2C
1089 help
1090 Say y here to support the regulators found on the NXP
1091 PF8100/PF8121A/PF8200 PMIC.
1092
1093 Say M here if you want to support for the regulators found
1094 on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named
1095 "pf8x00-regulator".
1096
1097config REGULATOR_PFUZE100
1098 tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
1099 depends on I2C && OF
1100 select REGMAP_I2C
1101 help
1102 Say y here to support the regulators found on the Freescale
1103 PFUZE100/200/3000/3001 PMIC.
1104
1105config REGULATOR_PV88060
1106 tristate "Powerventure Semiconductor PV88060 regulator"
1107 depends on I2C
1108 select REGMAP_I2C
1109 help
1110 Say y here to support the voltage regulators and convertors
1111 PV88060
1112
1113config REGULATOR_PV88080
1114 tristate "Powerventure Semiconductor PV88080 regulator"
1115 depends on I2C
1116 select REGMAP_I2C
1117 help
1118 Say y here to support the buck convertors on PV88080
1119
1120config REGULATOR_PV88090
1121 tristate "Powerventure Semiconductor PV88090 regulator"
1122 depends on I2C
1123 select REGMAP_I2C
1124 help
1125 Say y here to support the voltage regulators and convertors
1126 on PV88090
1127
1128config REGULATOR_PF1550
1129 tristate "NXP PF1550 regulator"
1130 depends on MFD_PF1550
1131 help
1132 Say y here to select this option to enable the regulators on
1133 the PF1550 PMICs.
1134 This driver controls the PF1550 regulators via I2C bus.
1135 The regulators include three bucks and three ldos.
1136
1137config REGULATOR_PWM
1138 tristate "PWM voltage regulator"
1139 depends on PWM
1140 help
1141 This driver supports PWM controlled voltage regulators. PWM
1142 duty cycle can increase or decrease the voltage.
1143
1144config REGULATOR_QCOM_PM8008
1145 tristate "Qualcomm PM8008 PMIC regulators"
1146 depends on MFD_QCOM_PM8008
1147 help
1148 Select this option to enable support for the voltage regulators in
1149 Qualcomm PM8008 PMICs.
1150
1151config REGULATOR_QCOM_REFGEN
1152 tristate "Qualcomm REFGEN regulator driver"
1153 depends on ARCH_QCOM || COMPILE_TEST
1154 depends on HAS_IOMEM
1155 depends on REGMAP
1156 help
1157 This driver supports the MMIO-mapped reference voltage regulator,
1158 used internally by some PHYs on many Qualcomm SoCs.
1159
1160 Say M here if you want to include support for this regulator as
1161 a module. The module will be named "qcom-refgen-regulator".
1162
1163config REGULATOR_QCOM_RPM
1164 tristate "Qualcomm RPM regulator driver"
1165 depends on MFD_QCOM_RPM
1166 help
1167 If you say yes to this option, support will be included for the
1168 regulators exposed by the Resource Power Manager found in Qualcomm
1169 8660, 8960 and 8064 based devices.
1170
1171 Say M here if you want to include support for the regulators on the
1172 Qualcomm RPM as a module. The module will be named
1173 "qcom_rpm-regulator".
1174
1175config REGULATOR_QCOM_RPMH
1176 tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
1177 depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST)
1178 depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST)
1179 help
1180 This driver supports control of PMIC regulators via the RPMh hardware
1181 block found on Qualcomm Technologies Inc. SoCs. RPMh regulator
1182 control allows for voting on regulator state between multiple
1183 processors within the SoC.
1184
1185config REGULATOR_QCOM_SMD_RPM
1186 tristate "Qualcomm SMD based RPM regulator driver"
1187 depends on QCOM_SMD_RPM
1188 help
1189 If you say yes to this option, support will be included for the
1190 regulators exposed by the Resource Power Manager found in Qualcomm
1191 8974 based devices.
1192
1193 Say M here if you want to include support for the regulators on the
1194 Qualcomm RPM as a module. The module will be named
1195 "qcom_smd-regulator".
1196
1197config REGULATOR_QCOM_SPMI
1198 tristate "Qualcomm SPMI regulator driver"
1199 depends on SPMI || COMPILE_TEST
1200 help
1201 If you say yes to this option, support will be included for the
1202 regulators found in Qualcomm SPMI PMICs.
1203
1204 Say M here if you want to include support for the regulators on the
1205 Qualcomm SPMI PMICs as a module. The module will be named
1206 "qcom_spmi-regulator".
1207
1208config REGULATOR_QCOM_USB_VBUS
1209 tristate "Qualcomm USB Vbus regulator driver"
1210 depends on SPMI || COMPILE_TEST
1211 help
1212 If you say yes to this option, support will be included for the
1213 regulator used to enable the VBUS output.
1214
1215 Say M here if you want to include support for enabling the VBUS output
1216 as a module. The module will be named "qcom_usb_vbus_regulator".
1217
1218config REGULATOR_RAA215300
1219 tristate "Renesas RAA215300 driver"
1220 select REGMAP_I2C
1221 depends on COMMON_CLK
1222 depends on I2C
1223 help
1224 If you say yes to this option, support will be included for the
1225 Renesas RAA215300 PMIC.
1226
1227 Say M here if you want to include support for Renesas RAA215300 PMIC
1228 as a module. The module will be named "raa215300".
1229
1230config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY
1231 tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
1232 depends on ARM || ARM64 || COMPILE_TEST
1233 depends on BACKLIGHT_CLASS_DEVICE
1234 depends on I2C
1235 depends on OF_GPIO
1236 select REGMAP_I2C
1237 help
1238 This driver supports ATTINY regulator on the Raspberry Pi 7-inch
1239 touchscreen unit. The regulator is used to enable power to the
1240 TC358762, display and to control backlight.
1241
1242config REGULATOR_RASPBERRYPI_TOUCHSCREEN_V2
1243 tristate "Raspberry Pi 7-inch touchscreen panel V2 regulator"
1244 depends on ARM || ARM64 || COMPILE_TEST
1245 depends on GPIOLIB
1246 depends on I2C && OF
1247 select GPIO_REGMAP
1248 select REGMAP_I2C
1249 help
1250 This driver supports regulator on the V2 Raspberry Pi touchscreen
1251 unit. The regulator is used to enable power to the display and to
1252 control backlight PWM.
1253
1254config REGULATOR_RC5T583
1255 tristate "RICOH RC5T583 Power regulators"
1256 depends on MFD_RC5T583
1257 help
1258 Select this option to enable the power regulator of RICOH
1259 PMIC RC5T583.
1260 This driver supports the control of different power rails of device
1261 through regulator interface. The device supports multiple DCDC/LDO
1262 outputs which can be controlled by i2c communication.
1263
1264config REGULATOR_RK808
1265 tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
1266 depends on MFD_RK8XX
1267 help
1268 Select this option to enable the power regulator of ROCKCHIP
1269 PMIC RK805,RK809&RK817,RK808 and RK818.
1270 This driver supports the control of different power rails of device
1271 through regulator interface. The device supports multiple DCDC/LDO
1272 outputs which can be controlled by i2c communication.
1273
1274config REGULATOR_RN5T618
1275 tristate "Ricoh RN5T567/618 voltage regulators"
1276 depends on MFD_RN5T618
1277 help
1278 Say y here to support the regulators found on Ricoh RN5T567,
1279 RN5T618 or RC5T619 PMIC.
1280
1281config REGULATOR_ROHM
1282 tristate
1283
1284config REGULATOR_RT4801
1285 tristate "Richtek RT4801 Regulators"
1286 depends on I2C
1287 select REGMAP_I2C
1288 help
1289 This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
1290 The device supports two regulators (DSVP/DSVN).
1291
1292config REGULATOR_RT4803
1293 tristate "Richtek RT4803 boost regulator"
1294 depends on I2C
1295 select REGMAP_I2C
1296 help
1297 This adds support for RT4803 boost converter that integrates the
1298 bypass switch. If the input voltage is low than the required voltage,
1299 RT4803 will enter boost mode. Otherwise, enable internal bypass
1300 switch to enter bypass mode.
1301
1302config REGULATOR_RT4831
1303 tristate "Richtek RT4831 DSV Regulators"
1304 depends on MFD_RT4831
1305 help
1306 This adds support for voltage regulators in Richtek RT4831.
1307 There are three regulators (VLCM/DSVP/DSVN).
1308 VLCM is a virtual voltage input for DSVP/DSVN inside IC.
1309 And DSVP/DSVN is the real Vout range from 4V to 6.5V.
1310 It's common used to provide the power for the display panel.
1311
1312config REGULATOR_RT5033
1313 tristate "Richtek RT5033 Regulators"
1314 depends on MFD_RT5033
1315 help
1316 This adds support for voltage and current regulators in Richtek
1317 RT5033 PMIC. The device supports multiple regulators like
1318 current source, LDO and Buck.
1319
1320config REGULATOR_RT5120
1321 tristate "Richtek RT5120 PMIC Regulators"
1322 depends on MFD_RT5120
1323 help
1324 This adds support for voltage regulator in Richtek RT5120 PMIC.
1325 It integrates 4 channels buck controller, 1 channel LDO, 1 EXTEN
1326 to control external power source. Only BUCK1 is adjustable from
1327 600mV to 1395mV, per step 6.250mV. The others are all fixed voltage
1328 by external hardware circuit.
1329
1330config REGULATOR_RT5133
1331 tristate "Richtek RT5133 PMIC Regulators"
1332 depends on I2C && GPIOLIB && OF
1333 select REGMAP
1334 select CRC8
1335 select OF_GPIO
1336 help
1337 This driver adds support for RT5133 PMIC regulators.
1338 RT5133 is an integrated chip. It includes 8 LDOs and 3 GPOs that
1339 can be used to drive output high/low purpose. The dependency of the
1340 GPO block is internally LDO1 Voltage.
1341
1342config REGULATOR_RT5190A
1343 tristate "Richtek RT5190A PMIC"
1344 depends on I2C
1345 select REGMAP_I2C
1346 help
1347 This adds support for voltage regulator in Richtek RT5190A PMIC.
1348 It integratas 1 channel buck controller, 3 channels high efficiency
1349 buck converters, 1 LDO, mute AC OFF depop function, with the general
1350 I2C control interface.
1351
1352config REGULATOR_RT5739
1353 tristate "Richtek RT5739 Regulator"
1354 depends on I2C
1355 select REGMAP_I2C
1356 help
1357 This adds support for voltage regulator in Richtek RT5739.
1358 It's a step-down switching voltage regulator. Using a proprietary
1359 architecture with synchronous rectification, it is capable of
1360 delivering 3.5A continuously at over 80% efficiency.
1361
1362 This driver can also be built as a module. If so, the module
1363 will be called rt5739.
1364
1365config REGULATOR_RT5759
1366 tristate "Richtek RT5759 Regulator"
1367 depends on I2C
1368 select REGMAP_I2C
1369 help
1370 This adds support for voltage regulator in Richtek RT5759.
1371 The RT5759 is a high-performance, synchronous step-down DC-DC
1372 converter that can deliver up to 9A output current from 3V to 6.5V
1373 input supply.
1374
1375config REGULATOR_RT6160
1376 tristate "Richtek RT6160 BuckBoost voltage regulator"
1377 depends on I2C
1378 select REGMAP_I2C
1379 help
1380 This adds support for voltage regulator in Richtek RT6160.
1381 This device automatically change voltage output mode from
1382 Buck or Boost. The mode transition depend on the input source voltage.
1383 The wide output range is from 2025mV to 5200mV and can be used on most
1384 common application scenario.
1385
1386config REGULATOR_RT6190
1387 tristate "Richtek RT6190 4-Switch BuckBoost controller"
1388 depends on I2C
1389 select REGMAP_I2C
1390 help
1391 The RT6190 is a 4-Switch BuckBoost controller designed for converting
1392 input voltage to output voltage that can be equal to, higher or lower
1393 than input voltage. It operates with wide input voltage range from
1394 4.5V to 36V, and the output voltage can be set from 3V to 36V by
1395 external FB pin.
1396
1397config REGULATOR_RT6245
1398 tristate "Richtek RT6245 voltage regulator"
1399 depends on I2C
1400 select REGMAP_I2C
1401 help
1402 This adds support for Richtek RT6245 voltage regulator.
1403 It can support up to 14A output current and adjustable output voltage
1404 from 0.4375V to 1.3875V, per step 12.5mV.
1405
1406config REGULATOR_RT8092
1407 tristate "Richtek RT8092 voltage regulator"
1408 depends on I2C
1409 select REGMAP_I2C
1410 help
1411 The RT8092 is a peak-current mode PWM step-down DC/DC converter with
1412 I2C control interface. It is capable of delivering 4A continuing
1413 current over a wide input range from 2.5V to 5.5V.
1414
1415config REGULATOR_RTQ2134
1416 tristate "Richtek RTQ2134 SubPMIC Regulator"
1417 depends on I2C
1418 select REGMAP_I2C
1419 help
1420 This driver adds support for RTQ2134 SubPMIC regulators.
1421 The RTQ2134 is a multi-phase, programmable power management IC that
1422 integrate with four high efficient, synchronous step-down converter
1423 cores. It features wide output voltage range and the capability to
1424 configure the corresponding power stages.
1425
1426config REGULATOR_RTMV20
1427 tristate "Richtek RTMV20 Laser Diode Regulator"
1428 depends on I2C
1429 select REGMAP_I2C
1430 help
1431 This driver adds support for the load switch current regulator on
1432 the Richtek RTMV20. It can support the load current up to 6A and
1433 integrate strobe/vsync/fsin signal to synchronize the IR camera.
1434
1435config REGULATOR_RTQ6752
1436 tristate "Richtek RTQ6752 TFT LCD voltage regulator"
1437 depends on I2C
1438 select REGMAP_I2C
1439 help
1440 This driver adds support for Richtek RTQ6752. RTQ6752 includes two
1441 synchronous boost converters for PAVDD, and one synchronous NAVDD
1442 buck-boost. This device is suitable for automotive TFT-LCD panel.
1443
1444config REGULATOR_RTQ2208
1445 tristate "Richtek RTQ2208 SubPMIC Regulator"
1446 depends on I2C
1447 select REGMAP_I2C
1448 help
1449 This driver adds support for RTQ2208 SubPMIC regulators.
1450 The RTQ2208 is a multi-phase, programmable power management IC that
1451 integrate with dual multi-configurable, synchronous buck converters
1452 and two ldos. It features wide output voltage range from 0.4V to 2.05V
1453 and the capability to configure the corresponding power stages.
1454
1455config REGULATOR_S2DOS05
1456 tristate "Samsung S2DOS05 voltage regulator"
1457 depends on MFD_SEC_CORE || COMPILE_TEST
1458 help
1459 This driver provides support for the voltage regulators of the S2DOS05.
1460 The S2DOS05 is a companion power management IC for the smart phones.
1461 The S2DOS05 has 4 LDOs and 1 BUCK outputs.
1462
1463config REGULATOR_S2MPA01
1464 tristate "Samsung S2MPA01 voltage regulator"
1465 depends on MFD_SEC_CORE || COMPILE_TEST
1466 help
1467 This driver controls Samsung S2MPA01 voltage output regulator
1468 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
1469
1470config REGULATOR_S2MPS11
1471 tristate "Samsung S2MPS11/13/14/15/S2MPU02/05 voltage regulator"
1472 depends on MFD_SEC_CORE || COMPILE_TEST
1473 help
1474 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02/05 voltage
1475 output regulator via I2C bus. The chip is comprised of high efficient
1476 Buck converters including Dual-Phase Buck converter, Buck-Boost
1477 converter, various LDOs.
1478
1479config REGULATOR_S5M8767
1480 tristate "Samsung S5M8767A voltage regulator"
1481 depends on MFD_SEC_CORE || COMPILE_TEST
1482 help
1483 This driver supports a Samsung S5M8767A voltage output regulator
1484 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
1485 supports DVS mode with 8bits of output voltage control.
1486
1487config REGULATOR_SC2731
1488 tristate "Spreadtrum SC2731 power regulator driver"
1489 depends on MFD_SC27XX_PMIC || COMPILE_TEST
1490 help
1491 This driver provides support for the voltage regulators on the
1492 SC2731 PMIC.
1493
1494config REGULATOR_SKY81452
1495 tristate "Skyworks Solutions SKY81452 voltage regulator"
1496 depends on MFD_SKY81452
1497 help
1498 This driver supports Skyworks SKY81452 voltage output regulator
1499 via I2C bus. SKY81452 has one voltage linear regulator can be
1500 programmed from 4.5V to 20V.
1501
1502 This driver can also be built as a module. If so, the module
1503 will be called sky81452-regulator.
1504
1505config REGULATOR_SLG51000
1506 tristate "Dialog Semiconductor SLG51000 regulators"
1507 depends on I2C
1508 select REGMAP_I2C
1509 help
1510 Say y here to support for the Dialog Semiconductor SLG51000.
1511 The SLG51000 is seven compact and customizable low dropout
1512 regulators.
1513
1514config REGULATOR_SPACEMIT_P1
1515 tristate "SpacemiT P1 regulators"
1516 depends on ARCH_SPACEMIT || COMPILE_TEST
1517 depends on I2C
1518 select MFD_SPACEMIT_P1
1519 default ARCH_SPACEMIT
1520 help
1521 Enable support for regulators implemented by the SpacemiT P1
1522 power controller. The P1 implements 6 high-efficiency buck
1523 converters and 12 programmable LDO regulators. To compile this
1524 driver as a module, choose M here. The module will be called
1525 "spacemit-pmic".
1526
1527config REGULATOR_STM32_BOOSTER
1528 tristate "STMicroelectronics STM32 BOOSTER"
1529 depends on ARCH_STM32 || COMPILE_TEST
1530 help
1531 This driver supports internal booster (3V3) embedded in some
1532 STMicroelectronics STM32 chips. It can be used to supply ADC analog
1533 input switches when vdda supply is below 2.7V.
1534
1535 This driver can also be built as a module. If so, the module
1536 will be called stm32-booster.
1537
1538config REGULATOR_STM32_VREFBUF
1539 tristate "STMicroelectronics STM32 VREFBUF"
1540 depends on ARCH_STM32 || COMPILE_TEST
1541 help
1542 This driver supports STMicroelectronics STM32 VREFBUF (voltage
1543 reference buffer) which can be used as voltage reference for
1544 internal ADCs, DACs and also for external components through
1545 dedicated Vref+ pin.
1546
1547 This driver can also be built as a module. If so, the module
1548 will be called stm32-vrefbuf.
1549
1550config REGULATOR_STM32_PWR
1551 bool "STMicroelectronics STM32 PWR"
1552 depends on ARCH_STM32 || COMPILE_TEST
1553 help
1554 This driver supports internal regulators (1V1, 1V8, 3V3) in the
1555 STMicroelectronics STM32 chips.
1556
1557config REGULATOR_STPMIC1
1558 tristate "STMicroelectronics STPMIC1 PMIC Regulators"
1559 depends on MFD_STPMIC1
1560 help
1561 This driver supports STMicroelectronics STPMIC1 PMIC voltage
1562 regulators and switches. The STPMIC1 regulators supply power to
1563 an application processor as well as to external system
1564 peripherals such as DDR, Flash memories and system devices.
1565
1566 To compile this driver as a module, choose M here: the
1567 module will be called stpmic1_regulator.
1568
1569config REGULATOR_TI_ABB
1570 tristate "TI Adaptive Body Bias on-chip LDO"
1571 depends on ARCH_OMAP || COMPILE_TEST
1572 help
1573 Select this option to support Texas Instruments' on-chip Adaptive Body
1574 Bias (ABB) LDO regulators. It is recommended that this option be
1575 enabled on required TI SoC. Certain Operating Performance Points
1576 on TI SoCs may be unstable without enabling this as it provides
1577 device specific optimized bias to allow/optimize functionality.
1578
1579config REGULATOR_STW481X_VMMC
1580 bool "ST Microelectronics STW481X VMMC regulator"
1581 depends on MFD_STW481X || COMPILE_TEST
1582 default y if MFD_STW481X
1583 help
1584 This driver supports the internal VMMC regulator in the STw481x
1585 PMIC chips.
1586
1587config REGULATOR_SUN20I
1588 tristate "Allwinner D1 internal LDOs"
1589 depends on ARCH_SUNXI || COMPILE_TEST
1590 select MFD_SYSCON
1591 default ARCH_SUNXI
1592 help
1593 This driver supports the internal LDOs in the Allwinner D1 SoC.
1594
1595config REGULATOR_SY7636A
1596 tristate "Silergy SY7636A voltage regulator"
1597 depends on MFD_SY7636A
1598 help
1599 This driver supports Silergy SY3686A voltage regulator.
1600
1601config REGULATOR_SY8106A
1602 tristate "Silergy SY8106A regulator"
1603 depends on I2C && OF
1604 select REGMAP_I2C
1605 help
1606 This driver supports SY8106A single output regulator.
1607
1608config REGULATOR_SY8824X
1609 tristate "Silergy SY8824C/SY8824E regulator"
1610 depends on I2C && OF
1611 select REGMAP_I2C
1612 help
1613 This driver supports SY8824C single output regulator.
1614
1615config REGULATOR_SY8827N
1616 tristate "Silergy SY8827N regulator"
1617 depends on I2C && OF
1618 select REGMAP_I2C
1619 help
1620 This driver supports SY8827N single output regulator.
1621
1622config REGULATOR_TPS51632
1623 tristate "TI TPS51632 Power Regulator"
1624 depends on I2C
1625 select REGMAP_I2C
1626 help
1627 This driver supports TPS51632 voltage regulator chip.
1628 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
1629 with Serial VID control and DVFS.
1630 The voltage output can be configure through I2C interface or PWM
1631 interface.
1632
1633config REGULATOR_TPS6105X
1634 tristate "TI TPS6105X Power regulators"
1635 depends on TPS6105X
1636 default y if TPS6105X
1637 help
1638 This driver supports TPS61050/TPS61052 voltage regulator chips.
1639 It is a single boost converter primarily for white LEDs and
1640 audio amplifiers.
1641
1642config REGULATOR_TPS62360
1643 tristate "TI TPS6236x Power Regulator"
1644 depends on I2C
1645 select REGMAP_I2C
1646 help
1647 This driver supports TPS6236x voltage regulator chip. This
1648 regulator is meant for processor core supply. This chip is
1649 high-frequency synchronous step down dc-dc converter optimized
1650 for battery-powered portable applications.
1651
1652config REGULATOR_TPS6286X
1653 tristate "TI TPS6286x Power Regulator"
1654 depends on I2C && OF
1655 select REGMAP_I2C
1656 help
1657 This driver supports TPS6236x voltage regulator chips. These are
1658 high-frequency synchronous step-down converters with an I2C
1659 interface.
1660
1661config REGULATOR_TPS6287X
1662 tristate "TI TPS6287x Power Regulator"
1663 depends on I2C && OF
1664 select REGMAP_I2C
1665 help
1666 This driver supports TPS6287x voltage regulator chips. These are
1667 pin-to-pin high-frequency synchronous step-down dc-dc converters
1668 with an I2C interface.
1669
1670 If built as a module it will be called tps6287x-regulator.
1671
1672config REGULATOR_TPS65023
1673 tristate "TI TPS65023 Power regulators"
1674 depends on I2C
1675 select REGMAP_I2C
1676 help
1677 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
1678 three step-down converters and two general-purpose LDO voltage regulators.
1679 It supports TI's software based Class-2 SmartReflex implementation.
1680
1681config REGULATOR_TPS6507X
1682 tristate "TI TPS6507X Power regulators"
1683 depends on I2C
1684 help
1685 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
1686 three step-down converters and two general-purpose LDO voltage regulators.
1687 It supports TI's software based Class-2 SmartReflex implementation.
1688
1689config REGULATOR_TPS65086
1690 tristate "TI TPS65086 Power regulators"
1691 depends on MFD_TPS65086
1692 help
1693 This driver provides support for the voltage regulators on
1694 TI TPS65086 PMICs.
1695
1696config REGULATOR_TPS65090
1697 tristate "TI TPS65090 Power regulator"
1698 depends on MFD_TPS65090
1699 help
1700 This driver provides support for the voltage regulators on the
1701 TI TPS65090 PMIC.
1702
1703config REGULATOR_TPS65132
1704 tristate "TI TPS65132 Dual Output Power regulators"
1705 depends on I2C && GPIOLIB
1706 select REGMAP_I2C
1707 help
1708 This driver supports TPS65132 single inductor - dual output
1709 power supply specifically designed for display panels.
1710
1711config REGULATOR_TPS65185
1712 tristate "TI TPS65185 EPD regulator"
1713 depends on I2C
1714 select REGMAP_I2C
1715 help
1716 This driver supports the TPS65185 voltage regulator chip
1717 which is used to provide power to Electronic Paper Displays
1718 so it is found in E-Book readers.
1719 If HWWON is enabled, it also provides temperature measurement.
1720
1721
1722config REGULATOR_TPS65217
1723 tristate "TI TPS65217 Power regulators"
1724 depends on MFD_TPS65217
1725 help
1726 This driver supports TPS65217 voltage regulator chips. TPS65217
1727 provides three step-down converters and four general-purpose LDO
1728 voltage regulators. It supports software based voltage control
1729 for different voltage domains
1730
1731config REGULATOR_TPS65218
1732 tristate "TI TPS65218 Power regulators"
1733 depends on MFD_TPS65218 && OF
1734 help
1735 This driver supports TPS65218 voltage regulator chips. TPS65218
1736 provides six step-down converters and one general-purpose LDO
1737 voltage regulators. It supports software based voltage control
1738 for different voltage domains
1739
1740config REGULATOR_TPS65219
1741 tristate "TI TPS65219 Power regulators"
1742 depends on MFD_TPS65219 && OF
1743 help
1744 This driver supports TPS65219, TPS65215, and TPS65214 voltage
1745 regulator chips.
1746 TPS65219 series of PMICs have 3 single phase BUCKs & 4 LDOs
1747 voltage regulators.
1748 TPS65215 PMIC has 3 single phase BUCKs & 2 LDOs.
1749 TPS65214 PMIC has 3 synchronous stepdown DC-DC converters & 2
1750 LDOs. One LDO supports a maximum output current of 300 mA and the
1751 other a maximum of 500 mA
1752 All 3 PMICs support software based voltage control for different
1753 voltage domains.
1754
1755config REGULATOR_TPS6594
1756 tristate "TI TPS6594 Power regulators"
1757 depends on MFD_TPS6594 && OF
1758 default MFD_TPS6594
1759 help
1760 This driver supports TPS6594 series and TPS65224 voltage regulator chips.
1761 TPS6594 series of PMICs have 5 BUCKs and 4 LDOs
1762 voltage regulators.
1763 BUCKs 1,2,3,4 can be used in single phase or multiphase mode.
1764 Part number defines which single or multiphase mode is i used.
1765 It supports software based voltage control
1766 for different voltage domains.
1767 TPS65224 PMIC has 4 BUCKs and 3 LDOs. BUCK12 can be used in dual phase.
1768 All BUCKs and LDOs volatge can be controlled through software.
1769
1770config REGULATOR_TPS6524X
1771 tristate "TI TPS6524X Power regulators"
1772 depends on SPI
1773 help
1774 This driver supports TPS6524X voltage regulator chips. TPS6524X
1775 provides three step-down converters and two general-purpose LDO
1776 voltage regulators. This device is interfaced using a customized
1777 serial interface currently supported on the sequencer serial
1778 port controller.
1779
1780config REGULATOR_TPS6586X
1781 tristate "TI TPS6586X Power regulators"
1782 depends on MFD_TPS6586X
1783 help
1784 This driver supports TPS6586X voltage regulator chips.
1785
1786config REGULATOR_TPS65910
1787 tristate "TI TPS65910/TPS65911 Power Regulators"
1788 depends on MFD_TPS65910
1789 help
1790 This driver supports TPS65910/TPS65911 voltage regulator chips.
1791
1792config REGULATOR_TPS65912
1793 tristate "TI TPS65912 Power regulator"
1794 depends on MFD_TPS65912
1795 help
1796 This driver supports TPS65912 voltage regulator chip.
1797
1798config REGULATOR_TPS68470
1799 tristate "TI TPS68470 PMIC Regulators Driver"
1800 depends on INTEL_SKL_INT3472 || COMPILE_TEST
1801 help
1802 This driver adds support for the TPS68470 PMIC to register
1803 regulators against the usual framework.
1804
1805 The module will be called "tps68470-regulator".
1806
1807config REGULATOR_TWL4030
1808 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
1809 depends on TWL4030_CORE
1810 help
1811 This driver supports the voltage regulators provided by
1812 this family of companion chips.
1813
1814config REGULATOR_UNIPHIER
1815 tristate "UniPhier regulator driver"
1816 depends on ARCH_UNIPHIER || COMPILE_TEST
1817 depends on OF
1818 select REGMAP_MMIO
1819 default ARCH_UNIPHIER
1820 help
1821 Support for regulators implemented on Socionext UniPhier SoCs.
1822
1823config REGULATOR_RZG2L_VBCTRL
1824 tristate "Renesas RZ/G2L USB VBUS regulator driver"
1825 depends on RESET_RZG2L_USBPHY_CTRL || COMPILE_TEST
1826 depends on OF
1827 select REGMAP_MMIO
1828 default RESET_RZG2L_USBPHY_CTRL
1829 help
1830 Support for VBUS regulators implemented on Renesas RZ/G2L SoCs.
1831
1832config REGULATOR_VCTRL
1833 tristate "Voltage controlled regulators"
1834 depends on OF
1835 help
1836 This driver provides support for voltage regulators whose output
1837 voltage is controlled by the voltage of another regulator.
1838
1839config REGULATOR_VEXPRESS
1840 tristate "Versatile Express regulators"
1841 depends on VEXPRESS_CONFIG
1842 help
1843 This driver provides support for voltage regulators available
1844 on the ARM Ltd's Versatile Express platform.
1845
1846config REGULATOR_VQMMC_IPQ4019
1847 tristate "IPQ4019 VQMMC SD LDO regulator support"
1848 depends on ARCH_QCOM
1849 help
1850 This driver provides support for the VQMMC LDO I/0
1851 voltage regulator of the IPQ4019 SD/EMMC controller.
1852
1853config REGULATOR_WM831X
1854 tristate "Wolfson Microelectronics WM831x PMIC regulators"
1855 depends on MFD_WM831X
1856 help
1857 Support the voltage and current regulators of the WM831x series
1858 of PMIC devices.
1859
1860config REGULATOR_WM8350
1861 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
1862 depends on MFD_WM8350
1863 help
1864 This driver provides support for the voltage and current regulators
1865 of the WM8350 AudioPlus PMIC.
1866
1867config REGULATOR_WM8400
1868 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
1869 depends on MFD_WM8400
1870 help
1871 This driver provides support for the voltage regulators of the
1872 WM8400 AudioPlus PMIC.
1873
1874config REGULATOR_WM8994
1875 tristate "Wolfson Microelectronics WM8994 CODEC"
1876 depends on MFD_WM8994
1877 help
1878 This driver provides support for the voltage regulators on the
1879 WM8994 CODEC.
1880
1881config REGULATOR_QCOM_LABIBB
1882 tristate "QCOM LAB/IBB regulator support"
1883 depends on SPMI || COMPILE_TEST
1884 help
1885 This driver supports Qualcomm's LAB/IBB regulators present on the
1886 Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
1887 based PMIC implementations. LAB can be used as positive
1888 boost regulator and IBB can be used as a negative boost regulator
1889 for LCD display panel.
1890
1891endif