Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Copyright (c) 2016-2017 Micron Technology, Inc.
4 *
5 * Authors:
6 * Peter Pan <peterpandong@micron.com>
7 */
8#ifndef __LINUX_MTD_SPINAND_H
9#define __LINUX_MTD_SPINAND_H
10
11#include <linux/mutex.h>
12#include <linux/bitops.h>
13#include <linux/device.h>
14#include <linux/mtd/mtd.h>
15#include <linux/mtd/nand.h>
16#include <linux/spi/spi.h>
17#include <linux/spi/spi-mem.h>
18
19/**
20 * Standard SPI NAND flash operations
21 */
22
23#define SPINAND_RESET_1S_0_0_OP \
24 SPI_MEM_OP(SPI_MEM_OP_CMD(0xff, 1), \
25 SPI_MEM_OP_NO_ADDR, \
26 SPI_MEM_OP_NO_DUMMY, \
27 SPI_MEM_OP_NO_DATA)
28
29#define SPINAND_WR_EN_1S_0_0_OP \
30 SPI_MEM_OP(SPI_MEM_OP_CMD(0x06, 1), \
31 SPI_MEM_OP_NO_ADDR, \
32 SPI_MEM_OP_NO_DUMMY, \
33 SPI_MEM_OP_NO_DATA)
34
35#define SPINAND_WR_DIS_1S_0_0_OP \
36 SPI_MEM_OP(SPI_MEM_OP_CMD(0x04, 1), \
37 SPI_MEM_OP_NO_ADDR, \
38 SPI_MEM_OP_NO_DUMMY, \
39 SPI_MEM_OP_NO_DATA)
40
41#define SPINAND_READID_1S_1S_1S_OP(naddr, ndummy, buf, len) \
42 SPI_MEM_OP(SPI_MEM_OP_CMD(0x9f, 1), \
43 SPI_MEM_OP_ADDR(naddr, 0, 1), \
44 SPI_MEM_OP_DUMMY(ndummy, 1), \
45 SPI_MEM_OP_DATA_IN(len, buf, 1))
46
47#define SPINAND_SET_FEATURE_1S_1S_1S_OP(reg, valptr) \
48 SPI_MEM_OP(SPI_MEM_OP_CMD(0x1f, 1), \
49 SPI_MEM_OP_ADDR(1, reg, 1), \
50 SPI_MEM_OP_NO_DUMMY, \
51 SPI_MEM_OP_DATA_OUT(1, valptr, 1))
52
53#define SPINAND_GET_FEATURE_1S_1S_1S_OP(reg, valptr) \
54 SPI_MEM_OP(SPI_MEM_OP_CMD(0x0f, 1), \
55 SPI_MEM_OP_ADDR(1, reg, 1), \
56 SPI_MEM_OP_NO_DUMMY, \
57 SPI_MEM_OP_DATA_IN(1, valptr, 1))
58
59#define SPINAND_BLK_ERASE_1S_1S_0_OP(addr) \
60 SPI_MEM_OP(SPI_MEM_OP_CMD(0xd8, 1), \
61 SPI_MEM_OP_ADDR(3, addr, 1), \
62 SPI_MEM_OP_NO_DUMMY, \
63 SPI_MEM_OP_NO_DATA)
64
65#define SPINAND_PAGE_READ_1S_1S_0_OP(addr) \
66 SPI_MEM_OP(SPI_MEM_OP_CMD(0x13, 1), \
67 SPI_MEM_OP_ADDR(3, addr, 1), \
68 SPI_MEM_OP_NO_DUMMY, \
69 SPI_MEM_OP_NO_DATA)
70
71#define SPINAND_PAGE_READ_FROM_CACHE_1S_1S_1S_OP(addr, ndummy, buf, len, freq) \
72 SPI_MEM_OP(SPI_MEM_OP_CMD(0x03, 1), \
73 SPI_MEM_OP_ADDR(2, addr, 1), \
74 SPI_MEM_OP_DUMMY(ndummy, 1), \
75 SPI_MEM_OP_DATA_IN(len, buf, 1), \
76 SPI_MEM_OP_MAX_FREQ(freq))
77
78#define SPINAND_PAGE_READ_FROM_CACHE_FAST_1S_1S_1S_OP(addr, ndummy, buf, len, freq) \
79 SPI_MEM_OP(SPI_MEM_OP_CMD(0x0b, 1), \
80 SPI_MEM_OP_ADDR(2, addr, 1), \
81 SPI_MEM_OP_DUMMY(ndummy, 1), \
82 SPI_MEM_OP_DATA_IN(len, buf, 1), \
83 SPI_MEM_OP_MAX_FREQ(freq))
84
85#define SPINAND_PAGE_READ_FROM_CACHE_3A_1S_1S_1S_OP(addr, ndummy, buf, len, freq) \
86 SPI_MEM_OP(SPI_MEM_OP_CMD(0x03, 1), \
87 SPI_MEM_OP_ADDR(3, addr, 1), \
88 SPI_MEM_OP_DUMMY(ndummy, 1), \
89 SPI_MEM_OP_DATA_IN(len, buf, 1), \
90 SPI_MEM_OP_MAX_FREQ(freq))
91
92#define SPINAND_PAGE_READ_FROM_CACHE_FAST_3A_1S_1S_1S_OP(addr, ndummy, buf, len, freq) \
93 SPI_MEM_OP(SPI_MEM_OP_CMD(0x0b, 1), \
94 SPI_MEM_OP_ADDR(3, addr, 1), \
95 SPI_MEM_OP_DUMMY(ndummy, 1), \
96 SPI_MEM_OP_DATA_IN(len, buf, 1), \
97 SPI_MEM_OP_MAX_FREQ(freq))
98
99#define SPINAND_PAGE_READ_FROM_CACHE_1S_1D_1D_OP(addr, ndummy, buf, len, freq) \
100 SPI_MEM_OP(SPI_MEM_OP_CMD(0x0d, 1), \
101 SPI_MEM_DTR_OP_ADDR(2, addr, 1), \
102 SPI_MEM_DTR_OP_DUMMY(ndummy, 1), \
103 SPI_MEM_DTR_OP_DATA_IN(len, buf, 1), \
104 SPI_MEM_OP_MAX_FREQ(freq))
105
106#define SPINAND_PAGE_READ_FROM_CACHE_1S_1S_2S_OP(addr, ndummy, buf, len, freq) \
107 SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \
108 SPI_MEM_OP_ADDR(2, addr, 1), \
109 SPI_MEM_OP_DUMMY(ndummy, 1), \
110 SPI_MEM_OP_DATA_IN(len, buf, 2), \
111 SPI_MEM_OP_MAX_FREQ(freq))
112
113#define SPINAND_PAGE_READ_FROM_CACHE_3A_1S_1S_2S_OP(addr, ndummy, buf, len, freq) \
114 SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \
115 SPI_MEM_OP_ADDR(3, addr, 1), \
116 SPI_MEM_OP_DUMMY(ndummy, 1), \
117 SPI_MEM_OP_DATA_IN(len, buf, 2), \
118 SPI_MEM_OP_MAX_FREQ(freq))
119
120#define SPINAND_PAGE_READ_FROM_CACHE_1S_1D_2D_OP(addr, ndummy, buf, len, freq) \
121 SPI_MEM_OP(SPI_MEM_OP_CMD(0x3d, 1), \
122 SPI_MEM_DTR_OP_ADDR(2, addr, 1), \
123 SPI_MEM_DTR_OP_DUMMY(ndummy, 1), \
124 SPI_MEM_DTR_OP_DATA_IN(len, buf, 2), \
125 SPI_MEM_OP_MAX_FREQ(freq))
126
127#define SPINAND_PAGE_READ_FROM_CACHE_1S_2S_2S_OP(addr, ndummy, buf, len, freq) \
128 SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \
129 SPI_MEM_OP_ADDR(2, addr, 2), \
130 SPI_MEM_OP_DUMMY(ndummy, 2), \
131 SPI_MEM_OP_DATA_IN(len, buf, 2), \
132 SPI_MEM_OP_MAX_FREQ(freq))
133
134#define SPINAND_PAGE_READ_FROM_CACHE_3A_1S_2S_2S_OP(addr, ndummy, buf, len, freq) \
135 SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \
136 SPI_MEM_OP_ADDR(3, addr, 2), \
137 SPI_MEM_OP_DUMMY(ndummy, 2), \
138 SPI_MEM_OP_DATA_IN(len, buf, 2), \
139 SPI_MEM_OP_MAX_FREQ(freq))
140
141#define SPINAND_PAGE_READ_FROM_CACHE_1S_2D_2D_OP(addr, ndummy, buf, len, freq) \
142 SPI_MEM_OP(SPI_MEM_OP_CMD(0xbd, 1), \
143 SPI_MEM_DTR_OP_ADDR(2, addr, 2), \
144 SPI_MEM_DTR_OP_DUMMY(ndummy, 2), \
145 SPI_MEM_DTR_OP_DATA_IN(len, buf, 2), \
146 SPI_MEM_OP_MAX_FREQ(freq))
147
148#define SPINAND_PAGE_READ_FROM_CACHE_1S_1S_4S_OP(addr, ndummy, buf, len, freq) \
149 SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \
150 SPI_MEM_OP_ADDR(2, addr, 1), \
151 SPI_MEM_OP_DUMMY(ndummy, 1), \
152 SPI_MEM_OP_DATA_IN(len, buf, 4), \
153 SPI_MEM_OP_MAX_FREQ(freq))
154
155#define SPINAND_PAGE_READ_FROM_CACHE_3A_1S_1S_4S_OP(addr, ndummy, buf, len, freq) \
156 SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \
157 SPI_MEM_OP_ADDR(3, addr, 1), \
158 SPI_MEM_OP_DUMMY(ndummy, 1), \
159 SPI_MEM_OP_DATA_IN(len, buf, 4), \
160 SPI_MEM_OP_MAX_FREQ(freq))
161
162#define SPINAND_PAGE_READ_FROM_CACHE_1S_1D_4D_OP(addr, ndummy, buf, len, freq) \
163 SPI_MEM_OP(SPI_MEM_OP_CMD(0x6d, 1), \
164 SPI_MEM_DTR_OP_ADDR(2, addr, 1), \
165 SPI_MEM_DTR_OP_DUMMY(ndummy, 1), \
166 SPI_MEM_DTR_OP_DATA_IN(len, buf, 4), \
167 SPI_MEM_OP_MAX_FREQ(freq))
168
169#define SPINAND_PAGE_READ_FROM_CACHE_1S_4S_4S_OP(addr, ndummy, buf, len, freq) \
170 SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \
171 SPI_MEM_OP_ADDR(2, addr, 4), \
172 SPI_MEM_OP_DUMMY(ndummy, 4), \
173 SPI_MEM_OP_DATA_IN(len, buf, 4), \
174 SPI_MEM_OP_MAX_FREQ(freq))
175
176#define SPINAND_PAGE_READ_FROM_CACHE_3A_1S_4S_4S_OP(addr, ndummy, buf, len, freq) \
177 SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \
178 SPI_MEM_OP_ADDR(3, addr, 4), \
179 SPI_MEM_OP_DUMMY(ndummy, 4), \
180 SPI_MEM_OP_DATA_IN(len, buf, 4), \
181 SPI_MEM_OP_MAX_FREQ(freq))
182
183#define SPINAND_PAGE_READ_FROM_CACHE_1S_4D_4D_OP(addr, ndummy, buf, len, freq) \
184 SPI_MEM_OP(SPI_MEM_OP_CMD(0xed, 1), \
185 SPI_MEM_DTR_OP_ADDR(2, addr, 4), \
186 SPI_MEM_DTR_OP_DUMMY(ndummy, 4), \
187 SPI_MEM_DTR_OP_DATA_IN(len, buf, 4), \
188 SPI_MEM_OP_MAX_FREQ(freq))
189
190#define SPINAND_PAGE_READ_FROM_CACHE_1S_1S_8S_OP(addr, ndummy, buf, len, freq) \
191 SPI_MEM_OP(SPI_MEM_OP_CMD(0x8b, 1), \
192 SPI_MEM_OP_ADDR(2, addr, 1), \
193 SPI_MEM_OP_DUMMY(ndummy, 1), \
194 SPI_MEM_OP_DATA_IN(len, buf, 8), \
195 SPI_MEM_OP_MAX_FREQ(freq))
196
197#define SPINAND_PAGE_READ_FROM_CACHE_1S_8S_8S_OP(addr, ndummy, buf, len, freq) \
198 SPI_MEM_OP(SPI_MEM_OP_CMD(0xcb, 1), \
199 SPI_MEM_OP_ADDR(2, addr, 8), \
200 SPI_MEM_OP_DUMMY(ndummy, 8), \
201 SPI_MEM_OP_DATA_IN(len, buf, 8), \
202 SPI_MEM_OP_MAX_FREQ(freq))
203
204#define SPINAND_PAGE_READ_FROM_CACHE_1S_1D_8D_OP(addr, ndummy, buf, len, freq) \
205 SPI_MEM_OP(SPI_MEM_OP_CMD(0x9d, 1), \
206 SPI_MEM_DTR_OP_ADDR(2, addr, 1), \
207 SPI_MEM_DTR_OP_DUMMY(ndummy, 1), \
208 SPI_MEM_DTR_OP_DATA_IN(len, buf, 8), \
209 SPI_MEM_OP_MAX_FREQ(freq))
210
211#define SPINAND_PROG_EXEC_1S_1S_0_OP(addr) \
212 SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1), \
213 SPI_MEM_OP_ADDR(3, addr, 1), \
214 SPI_MEM_OP_NO_DUMMY, \
215 SPI_MEM_OP_NO_DATA)
216
217#define SPINAND_PROG_LOAD_1S_1S_1S_OP(reset, addr, buf, len) \
218 SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x02 : 0x84, 1), \
219 SPI_MEM_OP_ADDR(2, addr, 1), \
220 SPI_MEM_OP_NO_DUMMY, \
221 SPI_MEM_OP_DATA_OUT(len, buf, 1))
222
223#define SPINAND_PROG_LOAD_1S_1S_4S_OP(reset, addr, buf, len) \
224 SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x32 : 0x34, 1), \
225 SPI_MEM_OP_ADDR(2, addr, 1), \
226 SPI_MEM_OP_NO_DUMMY, \
227 SPI_MEM_OP_DATA_OUT(len, buf, 4))
228
229#define SPINAND_PROG_LOAD_1S_1S_8S_OP(addr, buf, len) \
230 SPI_MEM_OP(SPI_MEM_OP_CMD(0x82, 1), \
231 SPI_MEM_OP_ADDR(2, addr, 1), \
232 SPI_MEM_OP_NO_DUMMY, \
233 SPI_MEM_OP_DATA_OUT(len, buf, 8))
234
235#define SPINAND_PROG_LOAD_1S_8S_8S_OP(reset, addr, buf, len) \
236 SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0xc2 : 0xc4, 1), \
237 SPI_MEM_OP_ADDR(2, addr, 8), \
238 SPI_MEM_OP_NO_DUMMY, \
239 SPI_MEM_OP_DATA_OUT(len, buf, 8))
240
241/**
242 * Octal DDR SPI NAND flash operations
243 */
244
245#define SPINAND_RESET_8D_0_0_OP \
246 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD(0xff, 8), \
247 SPI_MEM_OP_NO_ADDR, \
248 SPI_MEM_OP_NO_DUMMY, \
249 SPI_MEM_OP_NO_DATA)
250
251#define SPINAND_READID_8D_8D_8D_OP(naddr, ndummy, buf, len) \
252 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD(0x9f, 8), \
253 SPI_MEM_DTR_OP_ADDR(naddr, 0, 8), \
254 SPI_MEM_DTR_OP_DUMMY(ndummy, 8), \
255 SPI_MEM_DTR_OP_DATA_IN(len, buf, 8))
256
257#define SPINAND_WR_EN_8D_0_0_OP \
258 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD(0x06, 8), \
259 SPI_MEM_OP_NO_ADDR, \
260 SPI_MEM_OP_NO_DUMMY, \
261 SPI_MEM_OP_NO_DATA)
262
263#define SPINAND_WR_DIS_8D_0_0_OP \
264 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD(0x04, 8), \
265 SPI_MEM_OP_NO_ADDR, \
266 SPI_MEM_OP_NO_DUMMY, \
267 SPI_MEM_OP_NO_DATA)
268
269#define SPINAND_SET_FEATURE_8D_8D_8D_OP(reg, valptr) \
270 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD(0x1f, 8), \
271 SPI_MEM_DTR_OP_RPT_ADDR(reg, 8), \
272 SPI_MEM_OP_NO_DUMMY, \
273 SPI_MEM_DTR_OP_DATA_OUT(2, valptr, 8))
274
275#define SPINAND_GET_FEATURE_8D_8D_8D_OP(reg, valptr) \
276 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD(0x0f, 8), \
277 SPI_MEM_DTR_OP_RPT_ADDR(reg, 8), \
278 SPI_MEM_DTR_OP_DUMMY(14, 8), \
279 SPI_MEM_DTR_OP_DATA_IN(2, valptr, 8))
280
281#define SPINAND_BLK_ERASE_8D_8D_0_OP(addr) \
282 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD(0xd8, 8), \
283 SPI_MEM_DTR_OP_ADDR(2, addr, 8), \
284 SPI_MEM_OP_NO_DUMMY, \
285 SPI_MEM_OP_NO_DATA)
286
287#define SPINAND_PAGE_READ_8D_8D_0_OP(addr) \
288 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD(0x13, 8), \
289 SPI_MEM_DTR_OP_ADDR(2, addr, 8), \
290 SPI_MEM_OP_NO_DUMMY, \
291 SPI_MEM_OP_NO_DATA)
292
293#define SPINAND_PAGE_READ_PACKED_8D_8D_0_OP(addr) \
294 SPI_MEM_OP(SPI_MEM_DTR_OP_PACKED_CMD(0x13, addr >> 16, 8), \
295 SPI_MEM_DTR_OP_ADDR(2, addr & 0xffff, 8), \
296 SPI_MEM_OP_NO_DUMMY, \
297 SPI_MEM_OP_NO_DATA)
298
299#define SPINAND_PAGE_READ_FROM_CACHE_8D_8D_8D_OP(addr, ndummy, buf, len, freq) \
300 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD(0x9d, 8), \
301 SPI_MEM_DTR_OP_ADDR(2, addr, 8), \
302 SPI_MEM_DTR_OP_DUMMY(ndummy, 8), \
303 SPI_MEM_DTR_OP_DATA_IN(len, buf, 8), \
304 SPI_MEM_OP_MAX_FREQ(freq))
305
306#define SPINAND_PROG_EXEC_8D_8D_0_OP(addr) \
307 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD(0x10, 8), \
308 SPI_MEM_DTR_OP_ADDR(2, addr, 8), \
309 SPI_MEM_OP_NO_DUMMY, \
310 SPI_MEM_OP_NO_DATA)
311
312#define SPINAND_PROG_LOAD_8D_8D_8D_OP(reset, addr, buf, len) \
313 SPI_MEM_OP(SPI_MEM_DTR_OP_RPT_CMD((reset ? 0xc2 : 0xc4), 8), \
314 SPI_MEM_DTR_OP_ADDR(2, addr, 8), \
315 SPI_MEM_OP_NO_DUMMY, \
316 SPI_MEM_DTR_OP_DATA_OUT(len, buf, 8))
317
318/* feature register */
319#define REG_BLOCK_LOCK 0xa0
320#define BL_ALL_UNLOCKED 0x00
321
322/* configuration register */
323#define REG_CFG 0xb0
324#define CFG_OTP_ENABLE BIT(6)
325#define CFG_ECC_ENABLE BIT(4)
326#define CFG_QUAD_ENABLE BIT(0)
327
328/* status register */
329#define REG_STATUS 0xc0
330#define STATUS_BUSY BIT(0)
331#define STATUS_ERASE_FAILED BIT(2)
332#define STATUS_PROG_FAILED BIT(3)
333#define STATUS_ECC_MASK GENMASK(5, 4)
334#define STATUS_ECC_NO_BITFLIPS (0 << 4)
335#define STATUS_ECC_HAS_BITFLIPS (1 << 4)
336#define STATUS_ECC_UNCOR_ERROR (2 << 4)
337
338struct spinand_op;
339struct spinand_device;
340
341#define SPINAND_MAX_ID_LEN 6
342/*
343 * For erase, write and read operation, we got the following timings :
344 * tBERS (erase) 1ms to 4ms
345 * tPROG 300us to 400us
346 * tREAD 25us to 100us
347 * In order to minimize latency, the min value is divided by 4 for the
348 * initial delay, and dividing by 20 for the poll delay.
349 * For reset, 5us/10us/500us if the device is respectively
350 * reading/programming/erasing when the RESET occurs. Since we always
351 * issue a RESET when the device is IDLE, 5us is selected for both initial
352 * and poll delay.
353 */
354#define SPINAND_READ_INITIAL_DELAY_US 6
355#define SPINAND_READ_POLL_DELAY_US 5
356#define SPINAND_RESET_INITIAL_DELAY_US 5
357#define SPINAND_RESET_POLL_DELAY_US 5
358#define SPINAND_WRITE_INITIAL_DELAY_US 75
359#define SPINAND_WRITE_POLL_DELAY_US 15
360#define SPINAND_ERASE_INITIAL_DELAY_US 250
361#define SPINAND_ERASE_POLL_DELAY_US 50
362
363#define SPINAND_WAITRDY_TIMEOUT_MS 400
364
365/**
366 * struct spinand_id - SPI NAND id structure
367 * @data: buffer containing the id bytes. Currently 6 bytes large, but can
368 * be extended if required
369 * @len: ID length
370 */
371struct spinand_id {
372 u8 data[SPINAND_MAX_ID_LEN];
373 int len;
374};
375
376enum spinand_readid_method {
377 SPINAND_READID_METHOD_OPCODE,
378 SPINAND_READID_METHOD_OPCODE_ADDR,
379 SPINAND_READID_METHOD_OPCODE_DUMMY,
380};
381
382/**
383 * struct spinand_devid - SPI NAND device id structure
384 * @id: device id of current chip
385 * @len: number of bytes in device id
386 * @method: method to read chip id
387 * There are 3 possible variants:
388 * SPINAND_READID_METHOD_OPCODE: chip id is returned immediately
389 * after read_id opcode.
390 * SPINAND_READID_METHOD_OPCODE_ADDR: chip id is returned after
391 * read_id opcode + 1-byte address.
392 * SPINAND_READID_METHOD_OPCODE_DUMMY: chip id is returned after
393 * read_id opcode + 1 dummy byte.
394 */
395struct spinand_devid {
396 const u8 *id;
397 const u8 len;
398 const enum spinand_readid_method method;
399};
400
401/**
402 * struct manufacurer_ops - SPI NAND manufacturer specific operations
403 * @init: initialize a SPI NAND device
404 * @cleanup: cleanup a SPI NAND device
405 *
406 * Each SPI NAND manufacturer driver should implement this interface so that
407 * NAND chips coming from this vendor can be initialized properly.
408 */
409struct spinand_manufacturer_ops {
410 int (*init)(struct spinand_device *spinand);
411 void (*cleanup)(struct spinand_device *spinand);
412};
413
414/**
415 * struct spinand_manufacturer - SPI NAND manufacturer instance
416 * @id: manufacturer ID
417 * @name: manufacturer name
418 * @devid_len: number of bytes in device ID
419 * @chips: supported SPI NANDs under current manufacturer
420 * @nchips: number of SPI NANDs available in chips array
421 * @ops: manufacturer operations
422 */
423struct spinand_manufacturer {
424 u8 id;
425 char *name;
426 const struct spinand_info *chips;
427 const size_t nchips;
428 const struct spinand_manufacturer_ops *ops;
429};
430
431/* SPI NAND manufacturers */
432extern const struct spinand_manufacturer alliancememory_spinand_manufacturer;
433extern const struct spinand_manufacturer ato_spinand_manufacturer;
434extern const struct spinand_manufacturer dosilicon_spinand_manufacturer;
435extern const struct spinand_manufacturer esmt_8c_spinand_manufacturer;
436extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
437extern const struct spinand_manufacturer fmsh_spinand_manufacturer;
438extern const struct spinand_manufacturer foresee_spinand_manufacturer;
439extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
440extern const struct spinand_manufacturer macronix_spinand_manufacturer;
441extern const struct spinand_manufacturer micron_spinand_manufacturer;
442extern const struct spinand_manufacturer paragon_spinand_manufacturer;
443extern const struct spinand_manufacturer skyhigh_spinand_manufacturer;
444extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
445extern const struct spinand_manufacturer winbond_spinand_manufacturer;
446extern const struct spinand_manufacturer xtx_spinand_manufacturer;
447
448/**
449 * struct spinand_op_variants - SPI NAND operation variants
450 * @ops: the list of variants for a given operation
451 * @nops: the number of variants
452 *
453 * Some operations like read-from-cache/write-to-cache have several variants
454 * depending on the number of IO lines you use to transfer data or address
455 * cycles. This structure is a way to describe the different variants supported
456 * by a chip and let the core pick the best one based on the SPI mem controller
457 * capabilities.
458 */
459struct spinand_op_variants {
460 const struct spi_mem_op *ops;
461 unsigned int nops;
462};
463
464#define SPINAND_OP_VARIANTS(name, ...) \
465 const struct spinand_op_variants name = { \
466 .ops = (struct spi_mem_op[]) { __VA_ARGS__ }, \
467 .nops = sizeof((struct spi_mem_op[]){ __VA_ARGS__ }) / \
468 sizeof(struct spi_mem_op), \
469 }
470
471/**
472 * spinand_ecc_info - description of the on-die ECC implemented by a SPI NAND
473 * chip
474 * @get_status: get the ECC status. Should return a positive number encoding
475 * the number of corrected bitflips if correction was possible or
476 * -EBADMSG if there are uncorrectable errors. I can also return
477 * other negative error codes if the error is not caused by
478 * uncorrectable bitflips
479 * @ooblayout: the OOB layout used by the on-die ECC implementation
480 */
481struct spinand_ecc_info {
482 int (*get_status)(struct spinand_device *spinand, u8 status);
483 const struct mtd_ooblayout_ops *ooblayout;
484};
485
486/* SPI NAND flags */
487#define SPINAND_HAS_QE_BIT BIT(0)
488#define SPINAND_HAS_CR_FEAT_BIT BIT(1)
489#define SPINAND_HAS_PROG_PLANE_SELECT_BIT BIT(2)
490#define SPINAND_HAS_READ_PLANE_SELECT_BIT BIT(3)
491#define SPINAND_NO_RAW_ACCESS BIT(4)
492#define SPINAND_ODTR_PACKED_PAGE_READ BIT(5)
493
494/**
495 * struct spinand_ondie_ecc_conf - private SPI-NAND on-die ECC engine structure
496 * @status: status of the last wait operation that will be used in case
497 * ->get_status() is not populated by the spinand device.
498 */
499struct spinand_ondie_ecc_conf {
500 u8 status;
501};
502
503/**
504 * struct spinand_otp_layout - structure to describe the SPI NAND OTP area
505 * @npages: number of pages in the OTP
506 * @start_page: start page of the user/factory OTP area.
507 */
508struct spinand_otp_layout {
509 unsigned int npages;
510 unsigned int start_page;
511};
512
513/**
514 * struct spinand_fact_otp_ops - SPI NAND OTP methods for factory area
515 * @info: get the OTP area information
516 * @read: read from the SPI NAND OTP area
517 */
518struct spinand_fact_otp_ops {
519 int (*info)(struct spinand_device *spinand, size_t len,
520 struct otp_info *buf, size_t *retlen);
521 int (*read)(struct spinand_device *spinand, loff_t from, size_t len,
522 size_t *retlen, u8 *buf);
523};
524
525/**
526 * struct spinand_user_otp_ops - SPI NAND OTP methods for user area
527 * @info: get the OTP area information
528 * @lock: lock an OTP region
529 * @erase: erase an OTP region
530 * @read: read from the SPI NAND OTP area
531 * @write: write to the SPI NAND OTP area
532 */
533struct spinand_user_otp_ops {
534 int (*info)(struct spinand_device *spinand, size_t len,
535 struct otp_info *buf, size_t *retlen);
536 int (*lock)(struct spinand_device *spinand, loff_t from, size_t len);
537 int (*erase)(struct spinand_device *spinand, loff_t from, size_t len);
538 int (*read)(struct spinand_device *spinand, loff_t from, size_t len,
539 size_t *retlen, u8 *buf);
540 int (*write)(struct spinand_device *spinand, loff_t from, size_t len,
541 size_t *retlen, const u8 *buf);
542};
543
544/**
545 * struct spinand_fact_otp - SPI NAND OTP grouping structure for factory area
546 * @layout: OTP region layout
547 * @ops: OTP access ops
548 */
549struct spinand_fact_otp {
550 const struct spinand_otp_layout layout;
551 const struct spinand_fact_otp_ops *ops;
552};
553
554/**
555 * struct spinand_user_otp - SPI NAND OTP grouping structure for user area
556 * @layout: OTP region layout
557 * @ops: OTP access ops
558 */
559struct spinand_user_otp {
560 const struct spinand_otp_layout layout;
561 const struct spinand_user_otp_ops *ops;
562};
563
564/**
565 * enum spinand_bus_interface - SPI NAND bus interface types
566 * @SSDR: Bus configuration supporting all 1S-XX-XX operations, including dual and quad
567 * @ODTR: Bus configuration supporting only 8D-8D-8D operations
568 */
569enum spinand_bus_interface {
570 SSDR,
571 ODTR,
572};
573
574/**
575 * struct spinand_info - Structure used to describe SPI NAND chips
576 * @model: model name
577 * @devid: device ID
578 * @flags: OR-ing of the SPINAND_XXX flags
579 * @memorg: memory organization
580 * @eccreq: ECC requirements
581 * @eccinfo: on-die ECC info
582 * @op_variants: operations variants
583 * @op_variants.read_cache: variants of the read-cache operation
584 * @op_variants.write_cache: variants of the write-cache operation
585 * @op_variants.update_cache: variants of the update-cache operation
586 * @vendor_ops: vendor specific operations
587 * @select_target: function used to select a target/die. Required only for
588 * multi-die chips
589 * @configure_chip: Align the chip configuration with the core settings
590 * @set_cont_read: enable/disable continuous cached reads
591 * @fact_otp: SPI NAND factory OTP info.
592 * @user_otp: SPI NAND user OTP info.
593 * @read_retries: the number of read retry modes supported
594 * @set_read_retry: enable/disable read retry for data recovery
595 *
596 * Each SPI NAND manufacturer driver should have a spinand_info table
597 * describing all the chips supported by the driver.
598 */
599struct spinand_info {
600 const char *model;
601 struct spinand_devid devid;
602 u32 flags;
603 struct nand_memory_organization memorg;
604 struct nand_ecc_props eccreq;
605 struct spinand_ecc_info eccinfo;
606 struct {
607 const struct spinand_op_variants *read_cache;
608 const struct spinand_op_variants *write_cache;
609 const struct spinand_op_variants *update_cache;
610 } op_variants;
611 const struct spinand_op_variants *vendor_ops;
612 int (*select_target)(struct spinand_device *spinand,
613 unsigned int target);
614 int (*configure_chip)(struct spinand_device *spinand,
615 enum spinand_bus_interface iface);
616 int (*set_cont_read)(struct spinand_device *spinand,
617 bool enable);
618 struct spinand_fact_otp fact_otp;
619 struct spinand_user_otp user_otp;
620 unsigned int read_retries;
621 int (*set_read_retry)(struct spinand_device *spinand,
622 unsigned int read_retry);
623};
624
625#define SPINAND_ID(__method, ...) \
626 { \
627 .id = (const u8[]){ __VA_ARGS__ }, \
628 .len = sizeof((u8[]){ __VA_ARGS__ }), \
629 .method = __method, \
630 }
631
632#define SPINAND_INFO_OP_VARIANTS(__read, __write, __update) \
633 { \
634 .read_cache = __read, \
635 .write_cache = __write, \
636 .update_cache = __update, \
637 }
638
639#define SPINAND_INFO_VENDOR_OPS(__ops) \
640 .vendor_ops = __ops
641
642#define SPINAND_ECCINFO(__ooblayout, __get_status) \
643 .eccinfo = { \
644 .ooblayout = __ooblayout, \
645 .get_status = __get_status, \
646 }
647
648#define SPINAND_SELECT_TARGET(__func) \
649 .select_target = __func
650
651#define SPINAND_CONFIGURE_CHIP(__configure_chip) \
652 .configure_chip = __configure_chip
653
654#define SPINAND_CONT_READ(__set_cont_read) \
655 .set_cont_read = __set_cont_read
656
657#define SPINAND_FACT_OTP_INFO(__npages, __start_page, __ops) \
658 .fact_otp = { \
659 .layout = { \
660 .npages = __npages, \
661 .start_page = __start_page, \
662 }, \
663 .ops = __ops, \
664 }
665
666#define SPINAND_USER_OTP_INFO(__npages, __start_page, __ops) \
667 .user_otp = { \
668 .layout = { \
669 .npages = __npages, \
670 .start_page = __start_page, \
671 }, \
672 .ops = __ops, \
673 }
674
675#define SPINAND_READ_RETRY(__read_retries, __set_read_retry) \
676 .read_retries = __read_retries, \
677 .set_read_retry = __set_read_retry
678
679#define SPINAND_INFO(__model, __id, __memorg, __eccreq, __op_variants, \
680 __flags, ...) \
681 { \
682 .model = __model, \
683 .devid = __id, \
684 .memorg = __memorg, \
685 .eccreq = __eccreq, \
686 .op_variants = __op_variants, \
687 .flags = __flags, \
688 __VA_ARGS__ \
689 }
690
691struct spinand_dirmap {
692 struct spi_mem_dirmap_desc *wdesc;
693 struct spi_mem_dirmap_desc *rdesc;
694 struct spi_mem_dirmap_desc *wdesc_ecc;
695 struct spi_mem_dirmap_desc *rdesc_ecc;
696};
697
698/**
699 * struct spinand_mem_ops - SPI NAND memory operations
700 * @reset: reset op template
701 * @readid: read ID op template
702 * @wr_en: write enable op template
703 * @wr_dis: write disable op template
704 * @set_feature: set feature op template
705 * @get_feature: get feature op template
706 * @blk_erase: blk erase op template
707 * @page_read: page read op template
708 * @prog_exec: prog exec op template
709 * @read_cache: read cache op template
710 * @write_cache: write cache op template
711 * @update_cache: update cache op template
712 */
713struct spinand_mem_ops {
714 struct spi_mem_op reset;
715 struct spi_mem_op readid;
716 struct spi_mem_op wr_en;
717 struct spi_mem_op wr_dis;
718 struct spi_mem_op set_feature;
719 struct spi_mem_op get_feature;
720 struct spi_mem_op blk_erase;
721 struct spi_mem_op page_read;
722 struct spi_mem_op prog_exec;
723 const struct spi_mem_op *read_cache;
724 const struct spi_mem_op *write_cache;
725 const struct spi_mem_op *update_cache;
726};
727
728/**
729 * struct spinand_device - SPI NAND device instance
730 * @base: NAND device instance
731 * @spimem: pointer to the SPI mem object
732 * @lock: lock used to serialize accesses to the NAND
733 * @id: NAND ID as returned by READ_ID
734 * @flags: NAND flags
735 * @ssdr_op_templates: Templates for all single SDR SPI mem operations
736 * @odtr_op_templates: Templates for all octal DTR SPI mem operations
737 * @op_templates: Templates for all SPI mem operations
738 * @bus_iface: Current bus interface
739 * @select_target: select a specific target/die. Usually called before sending
740 * a command addressing a page or an eraseblock embedded in
741 * this die. Only required if your chip exposes several dies
742 * @cur_target: currently selected target/die
743 * @eccinfo: on-die ECC information
744 * @cfg_cache: config register cache. One entry per die
745 * @databuf: bounce buffer for data
746 * @oobbuf: bounce buffer for OOB data
747 * @scratchbuf: buffer used for everything but page accesses. This is needed
748 * because the spi-mem interface explicitly requests that buffers
749 * passed in spi_mem_op be DMA-able, so we can't based the bufs on
750 * the stack
751 * @manufacturer: SPI NAND manufacturer information
752 * @configure_chip: Align the chip configuration with the core settings
753 * @cont_read_possible: Field filled by the core once the whole system
754 * configuration is known to tell whether continuous reads are
755 * suitable to use or not in general with this chip/configuration.
756 * A per-transfer check must of course be done to ensure it is
757 * actually relevant to enable this feature.
758 * @set_cont_read: Enable/disable the continuous read feature
759 * @priv: manufacturer private data
760 * @fact_otp: SPI NAND factory OTP info.
761 * @user_otp: SPI NAND user OTP info.
762 * @read_retries: the number of read retry modes supported
763 * @set_read_retry: Enable/disable the read retry feature
764 */
765struct spinand_device {
766 struct nand_device base;
767 struct spi_mem *spimem;
768 struct mutex lock;
769 struct spinand_id id;
770 u32 flags;
771
772 struct spinand_mem_ops ssdr_op_templates;
773 struct spinand_mem_ops odtr_op_templates;
774 struct spinand_mem_ops *op_templates;
775 enum spinand_bus_interface bus_iface;
776
777 struct spinand_dirmap *dirmaps;
778
779 int (*select_target)(struct spinand_device *spinand,
780 unsigned int target);
781 unsigned int cur_target;
782
783 struct spinand_ecc_info eccinfo;
784
785 u8 *cfg_cache;
786 u8 *databuf;
787 u8 *oobbuf;
788 u8 *scratchbuf;
789 const struct spinand_manufacturer *manufacturer;
790 void *priv;
791
792 int (*configure_chip)(struct spinand_device *spinand,
793 enum spinand_bus_interface iface);
794 bool cont_read_possible;
795 int (*set_cont_read)(struct spinand_device *spinand,
796 bool enable);
797
798 const struct spinand_fact_otp *fact_otp;
799 const struct spinand_user_otp *user_otp;
800
801 unsigned int read_retries;
802 int (*set_read_retry)(struct spinand_device *spinand,
803 unsigned int retry_mode);
804};
805
806struct spi_mem_op spinand_fill_wr_en_op(struct spinand_device *spinand);
807struct spi_mem_op spinand_fill_set_feature_op(struct spinand_device *spinand, u64 reg, const void *valptr);
808struct spi_mem_op spinand_fill_get_feature_op(struct spinand_device *spinand, u64 reg, void *valptr);
809struct spi_mem_op spinand_fill_prog_exec_op(struct spinand_device *spinand, u64 addr);
810
811#define SPINAND_OP(spinand, op_name, ...) \
812 spinand_fill_ ## op_name ## _op(spinand, ##__VA_ARGS__)
813
814/**
815 * mtd_to_spinand() - Get the SPI NAND device attached to an MTD instance
816 * @mtd: MTD instance
817 *
818 * Return: the SPI NAND device attached to @mtd.
819 */
820static inline struct spinand_device *mtd_to_spinand(struct mtd_info *mtd)
821{
822 return container_of(mtd_to_nanddev(mtd), struct spinand_device, base);
823}
824
825/**
826 * spinand_to_mtd() - Get the MTD device embedded in a SPI NAND device
827 * @spinand: SPI NAND device
828 *
829 * Return: the MTD device embedded in @spinand.
830 */
831static inline struct mtd_info *spinand_to_mtd(struct spinand_device *spinand)
832{
833 return nanddev_to_mtd(&spinand->base);
834}
835
836/**
837 * nand_to_spinand() - Get the SPI NAND device embedding an NAND object
838 * @nand: NAND object
839 *
840 * Return: the SPI NAND device embedding @nand.
841 */
842static inline struct spinand_device *nand_to_spinand(struct nand_device *nand)
843{
844 return container_of(nand, struct spinand_device, base);
845}
846
847/**
848 * spinand_to_nand() - Get the NAND device embedded in a SPI NAND object
849 * @spinand: SPI NAND device
850 *
851 * Return: the NAND device embedded in @spinand.
852 */
853static inline struct nand_device *
854spinand_to_nand(struct spinand_device *spinand)
855{
856 return &spinand->base;
857}
858
859/**
860 * spinand_set_of_node - Attach a DT node to a SPI NAND device
861 * @spinand: SPI NAND device
862 * @np: DT node
863 *
864 * Attach a DT node to a SPI NAND device.
865 */
866static inline void spinand_set_of_node(struct spinand_device *spinand,
867 struct device_node *np)
868{
869 nanddev_set_of_node(&spinand->base, np);
870}
871
872int spinand_match_and_init(struct spinand_device *spinand,
873 const struct spinand_info *table,
874 unsigned int table_size,
875 enum spinand_readid_method rdid_method);
876
877int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
878int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val);
879int spinand_write_reg_op(struct spinand_device *spinand, u8 reg, u8 val);
880int spinand_write_enable_op(struct spinand_device *spinand);
881int spinand_select_target(struct spinand_device *spinand, unsigned int target);
882
883int spinand_wait(struct spinand_device *spinand, unsigned long initial_delay_us,
884 unsigned long poll_delay_us, u8 *s);
885
886int spinand_read_page(struct spinand_device *spinand,
887 const struct nand_page_io_req *req);
888
889int spinand_write_page(struct spinand_device *spinand,
890 const struct nand_page_io_req *req);
891
892size_t spinand_otp_page_size(struct spinand_device *spinand);
893size_t spinand_fact_otp_size(struct spinand_device *spinand);
894size_t spinand_user_otp_size(struct spinand_device *spinand);
895
896int spinand_fact_otp_read(struct spinand_device *spinand, loff_t ofs,
897 size_t len, size_t *retlen, u8 *buf);
898int spinand_user_otp_read(struct spinand_device *spinand, loff_t ofs,
899 size_t len, size_t *retlen, u8 *buf);
900int spinand_user_otp_write(struct spinand_device *spinand, loff_t ofs,
901 size_t len, size_t *retlen, const u8 *buf);
902
903int spinand_set_mtd_otp_ops(struct spinand_device *spinand);
904
905#endif /* __LINUX_MTD_SPINAND_H */