Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
4 * Author: Jian Hu <jian.hu@amlogic.com>
5 *
6 * Copyright (c) 2023, SberDevices. All Rights Reserved.
7 * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
8 */
9
10#include <linux/clk-provider.h>
11#include <linux/mod_devicetable.h>
12#include <linux/platform_device.h>
13#include "clk-pll.h"
14#include "clk-regmap.h"
15#include "meson-clkc-utils.h"
16
17#define ANACTRL_FIXPLL_CTRL0 0x0
18#define ANACTRL_FIXPLL_CTRL1 0x4
19#define ANACTRL_FIXPLL_STS 0x14
20#define ANACTRL_HIFIPLL_CTRL0 0xc0
21#define ANACTRL_HIFIPLL_CTRL1 0xc4
22#define ANACTRL_HIFIPLL_CTRL2 0xc8
23#define ANACTRL_HIFIPLL_CTRL3 0xcc
24#define ANACTRL_HIFIPLL_CTRL4 0xd0
25#define ANACTRL_HIFIPLL_STS 0xd4
26
27#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
28
29static struct clk_regmap a1_fixed_pll_dco = {
30 .data = &(struct meson_clk_pll_data){
31 .en = {
32 .reg_off = ANACTRL_FIXPLL_CTRL0,
33 .shift = 28,
34 .width = 1,
35 },
36 .m = {
37 .reg_off = ANACTRL_FIXPLL_CTRL0,
38 .shift = 0,
39 .width = 8,
40 },
41 .n = {
42 .reg_off = ANACTRL_FIXPLL_CTRL0,
43 .shift = 10,
44 .width = 5,
45 },
46 .frac = {
47 .reg_off = ANACTRL_FIXPLL_CTRL1,
48 .shift = 0,
49 .width = 19,
50 },
51 .l = {
52 .reg_off = ANACTRL_FIXPLL_STS,
53 .shift = 31,
54 .width = 1,
55 },
56 .rst = {
57 .reg_off = ANACTRL_FIXPLL_CTRL0,
58 .shift = 29,
59 .width = 1,
60 },
61 },
62 .hw.init = &(struct clk_init_data){
63 .name = "fixed_pll_dco",
64 .ops = &meson_clk_pll_ro_ops,
65 .parent_data = &(const struct clk_parent_data) {
66 .fw_name = "fixpll_in",
67 },
68 .num_parents = 1,
69 },
70};
71
72static struct clk_regmap a1_fixed_pll = {
73 .data = &(struct clk_regmap_gate_data){
74 .offset = ANACTRL_FIXPLL_CTRL0,
75 .bit_idx = 20,
76 },
77 .hw.init = &(struct clk_init_data) {
78 .name = "fixed_pll",
79 .ops = &clk_regmap_gate_ops,
80 .parent_hws = (const struct clk_hw *[]) {
81 &a1_fixed_pll_dco.hw
82 },
83 .num_parents = 1,
84 },
85};
86
87static const struct pll_mult_range a1_hifi_pll_range = {
88 .min = 32,
89 .max = 64,
90};
91
92static const struct reg_sequence a1_hifi_pll_init_regs[] = {
93 { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 },
94 { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 },
95 { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 },
96 { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 },
97 { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18000 },
98};
99
100static struct clk_regmap a1_hifi_pll = {
101 .data = &(struct meson_clk_pll_data){
102 .en = {
103 .reg_off = ANACTRL_HIFIPLL_CTRL0,
104 .shift = 28,
105 .width = 1,
106 },
107 .m = {
108 .reg_off = ANACTRL_HIFIPLL_CTRL0,
109 .shift = 0,
110 .width = 8,
111 },
112 .n = {
113 .reg_off = ANACTRL_HIFIPLL_CTRL0,
114 .shift = 10,
115 .width = 5,
116 },
117 .frac = {
118 .reg_off = ANACTRL_HIFIPLL_CTRL1,
119 .shift = 0,
120 .width = 19,
121 },
122 .l = {
123 .reg_off = ANACTRL_HIFIPLL_STS,
124 .shift = 31,
125 .width = 1,
126 },
127 .current_en = {
128 .reg_off = ANACTRL_HIFIPLL_CTRL0,
129 .shift = 26,
130 .width = 1,
131 },
132 .l_detect = {
133 .reg_off = ANACTRL_HIFIPLL_CTRL2,
134 .shift = 6,
135 .width = 1,
136 },
137 .range = &a1_hifi_pll_range,
138 .init_regs = a1_hifi_pll_init_regs,
139 .init_count = ARRAY_SIZE(a1_hifi_pll_init_regs),
140 },
141 .hw.init = &(struct clk_init_data){
142 .name = "hifi_pll",
143 .ops = &meson_clk_pll_ops,
144 .parent_data = &(const struct clk_parent_data) {
145 .fw_name = "hifipll_in",
146 },
147 .num_parents = 1,
148 },
149};
150
151static struct clk_fixed_factor a1_fclk_div2_div = {
152 .mult = 1,
153 .div = 2,
154 .hw.init = &(struct clk_init_data){
155 .name = "fclk_div2_div",
156 .ops = &clk_fixed_factor_ops,
157 .parent_hws = (const struct clk_hw *[]) {
158 &a1_fixed_pll.hw
159 },
160 .num_parents = 1,
161 },
162};
163
164static struct clk_regmap a1_fclk_div2 = {
165 .data = &(struct clk_regmap_gate_data){
166 .offset = ANACTRL_FIXPLL_CTRL0,
167 .bit_idx = 21,
168 },
169 .hw.init = &(struct clk_init_data){
170 .name = "fclk_div2",
171 .ops = &clk_regmap_gate_ops,
172 .parent_hws = (const struct clk_hw *[]) {
173 &a1_fclk_div2_div.hw
174 },
175 .num_parents = 1,
176 /*
177 * This clock is used by DDR clock in BL2 firmware
178 * and is required by the platform to operate correctly.
179 * Until the following condition are met, we need this clock to
180 * be marked as critical:
181 * a) Mark the clock used by a firmware resource, if possible
182 * b) CCF has a clock hand-off mechanism to make the sure the
183 * clock stays on until the proper driver comes along
184 */
185 .flags = CLK_IS_CRITICAL,
186 },
187};
188
189static struct clk_fixed_factor a1_fclk_div3_div = {
190 .mult = 1,
191 .div = 3,
192 .hw.init = &(struct clk_init_data){
193 .name = "fclk_div3_div",
194 .ops = &clk_fixed_factor_ops,
195 .parent_hws = (const struct clk_hw *[]) {
196 &a1_fixed_pll.hw
197 },
198 .num_parents = 1,
199 },
200};
201
202static struct clk_regmap a1_fclk_div3 = {
203 .data = &(struct clk_regmap_gate_data){
204 .offset = ANACTRL_FIXPLL_CTRL0,
205 .bit_idx = 22,
206 },
207 .hw.init = &(struct clk_init_data){
208 .name = "fclk_div3",
209 .ops = &clk_regmap_gate_ops,
210 .parent_hws = (const struct clk_hw *[]) {
211 &a1_fclk_div3_div.hw
212 },
213 .num_parents = 1,
214 /*
215 * This clock is used by APB bus which is set in boot ROM code
216 * and is required by the platform to operate correctly.
217 */
218 .flags = CLK_IS_CRITICAL,
219 },
220};
221
222static struct clk_fixed_factor a1_fclk_div5_div = {
223 .mult = 1,
224 .div = 5,
225 .hw.init = &(struct clk_init_data){
226 .name = "fclk_div5_div",
227 .ops = &clk_fixed_factor_ops,
228 .parent_hws = (const struct clk_hw *[]) {
229 &a1_fixed_pll.hw
230 },
231 .num_parents = 1,
232 },
233};
234
235static struct clk_regmap a1_fclk_div5 = {
236 .data = &(struct clk_regmap_gate_data){
237 .offset = ANACTRL_FIXPLL_CTRL0,
238 .bit_idx = 23,
239 },
240 .hw.init = &(struct clk_init_data){
241 .name = "fclk_div5",
242 .ops = &clk_regmap_gate_ops,
243 .parent_hws = (const struct clk_hw *[]) {
244 &a1_fclk_div5_div.hw
245 },
246 .num_parents = 1,
247 /*
248 * This clock is used by AXI bus which setted in Romcode
249 * and is required by the platform to operate correctly.
250 */
251 .flags = CLK_IS_CRITICAL,
252 },
253};
254
255static struct clk_fixed_factor a1_fclk_div7_div = {
256 .mult = 1,
257 .div = 7,
258 .hw.init = &(struct clk_init_data){
259 .name = "fclk_div7_div",
260 .ops = &clk_fixed_factor_ops,
261 .parent_hws = (const struct clk_hw *[]) {
262 &a1_fixed_pll.hw
263 },
264 .num_parents = 1,
265 },
266};
267
268static struct clk_regmap a1_fclk_div7 = {
269 .data = &(struct clk_regmap_gate_data){
270 .offset = ANACTRL_FIXPLL_CTRL0,
271 .bit_idx = 24,
272 },
273 .hw.init = &(struct clk_init_data){
274 .name = "fclk_div7",
275 .ops = &clk_regmap_gate_ops,
276 .parent_hws = (const struct clk_hw *[]) {
277 &a1_fclk_div7_div.hw
278 },
279 .num_parents = 1,
280 },
281};
282
283/* Array of all clocks registered by this provider */
284static struct clk_hw *a1_pll_hw_clks[] = {
285 [CLKID_FIXED_PLL_DCO] = &a1_fixed_pll_dco.hw,
286 [CLKID_FIXED_PLL] = &a1_fixed_pll.hw,
287 [CLKID_FCLK_DIV2_DIV] = &a1_fclk_div2_div.hw,
288 [CLKID_FCLK_DIV3_DIV] = &a1_fclk_div3_div.hw,
289 [CLKID_FCLK_DIV5_DIV] = &a1_fclk_div5_div.hw,
290 [CLKID_FCLK_DIV7_DIV] = &a1_fclk_div7_div.hw,
291 [CLKID_FCLK_DIV2] = &a1_fclk_div2.hw,
292 [CLKID_FCLK_DIV3] = &a1_fclk_div3.hw,
293 [CLKID_FCLK_DIV5] = &a1_fclk_div5.hw,
294 [CLKID_FCLK_DIV7] = &a1_fclk_div7.hw,
295 [CLKID_HIFI_PLL] = &a1_hifi_pll.hw,
296};
297
298static const struct meson_clkc_data a1_pll_clkc_data = {
299 .hw_clks = {
300 .hws = a1_pll_hw_clks,
301 .num = ARRAY_SIZE(a1_pll_hw_clks),
302 },
303};
304
305static const struct of_device_id a1_pll_clkc_match_table[] = {
306 {
307 .compatible = "amlogic,a1-pll-clkc",
308 .data = &a1_pll_clkc_data,
309 },
310 {}
311};
312MODULE_DEVICE_TABLE(of, a1_pll_clkc_match_table);
313
314static struct platform_driver a1_pll_clkc_driver = {
315 .probe = meson_clkc_mmio_probe,
316 .driver = {
317 .name = "a1-pll-clkc",
318 .of_match_table = a1_pll_clkc_match_table,
319 },
320};
321module_platform_driver(a1_pll_clkc_driver);
322
323MODULE_DESCRIPTION("Amlogic A1 PLL Clock Controller driver");
324MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>");
325MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>");
326MODULE_LICENSE("GPL");
327MODULE_IMPORT_NS("CLK_MESON");