Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2012 Texas Instruments
4 * Author: Rob Clark <robdclark@gmail.com>
5 */
6
7#include <linux/gpio/consumer.h>
8#include <linux/hdmi.h>
9#include <linux/i2c.h>
10#include <linux/module.h>
11#include <linux/platform_data/tda9950.h>
12#include <linux/irq.h>
13#include <sound/asoundef.h>
14#include <sound/hdmi-codec.h>
15
16#include <drm/drm_atomic_helper.h>
17#include <drm/drm_bridge.h>
18#include <drm/drm_edid.h>
19#include <drm/drm_of.h>
20#include <drm/drm_print.h>
21#include <drm/drm_probe_helper.h>
22#include <drm/drm_simple_kms_helper.h>
23
24#include <media/cec-notifier.h>
25
26#include <dt-bindings/display/tda998x.h>
27
28#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
29
30enum {
31 AUDIO_ROUTE_I2S,
32 AUDIO_ROUTE_SPDIF,
33 AUDIO_ROUTE_NUM
34};
35
36struct tda998x_audio_route {
37 u8 ena_aclk;
38 u8 mux_ap;
39 u8 aip_clksel;
40};
41
42struct tda998x_audio_settings {
43 const struct tda998x_audio_route *route;
44 struct hdmi_audio_infoframe cea;
45 unsigned int sample_rate;
46 u8 status[5];
47 u8 ena_ap;
48 u8 i2s_format;
49 u8 cts_n;
50};
51
52struct tda998x_priv {
53 struct i2c_client *cec;
54 struct i2c_client *hdmi;
55 struct mutex mutex;
56 u16 rev;
57 u8 cec_addr;
58 u8 current_page;
59 bool is_on;
60 bool supports_infoframes;
61 bool sink_has_audio;
62 enum hdmi_quantization_range rgb_quant_range;
63 u8 vip_cntrl_0;
64 u8 vip_cntrl_1;
65 u8 vip_cntrl_2;
66 unsigned long tmds_clock;
67 struct tda998x_audio_settings audio;
68
69 struct platform_device *audio_pdev;
70 struct mutex audio_mutex;
71
72 struct mutex edid_mutex;
73 wait_queue_head_t wq_edid;
74 volatile int wq_edid_wait;
75
76 struct work_struct detect_work;
77 struct timer_list edid_delay_timer;
78 wait_queue_head_t edid_delay_waitq;
79 bool edid_delay_active;
80
81 struct drm_encoder encoder;
82 struct drm_bridge bridge;
83 struct drm_connector connector;
84
85 u8 audio_port_enable[AUDIO_ROUTE_NUM];
86 struct tda9950_glue cec_glue;
87 struct gpio_desc *calib;
88 struct cec_notifier *cec_notify;
89};
90
91#define conn_to_tda998x_priv(x) \
92 container_of(x, struct tda998x_priv, connector)
93#define enc_to_tda998x_priv(x) \
94 container_of(x, struct tda998x_priv, encoder)
95#define bridge_to_tda998x_priv(x) \
96 container_of(x, struct tda998x_priv, bridge)
97
98/* The TDA9988 series of devices use a paged register scheme.. to simplify
99 * things we encode the page # in upper bits of the register #. To read/
100 * write a given register, we need to make sure CURPAGE register is set
101 * appropriately. Which implies reads/writes are not atomic. Fun!
102 */
103
104#define REG(page, addr) (((page) << 8) | (addr))
105#define REG2ADDR(reg) ((reg) & 0xff)
106#define REG2PAGE(reg) (((reg) >> 8) & 0xff)
107
108#define REG_CURPAGE 0xff /* write */
109
110
111/* Page 00h: General Control */
112#define REG_VERSION_LSB REG(0x00, 0x00) /* read */
113#define REG_MAIN_CNTRL0 REG(0x00, 0x01) /* read/write */
114# define MAIN_CNTRL0_SR (1 << 0)
115# define MAIN_CNTRL0_DECS (1 << 1)
116# define MAIN_CNTRL0_DEHS (1 << 2)
117# define MAIN_CNTRL0_CECS (1 << 3)
118# define MAIN_CNTRL0_CEHS (1 << 4)
119# define MAIN_CNTRL0_SCALER (1 << 7)
120#define REG_VERSION_MSB REG(0x00, 0x02) /* read */
121#define REG_SOFTRESET REG(0x00, 0x0a) /* write */
122# define SOFTRESET_AUDIO (1 << 0)
123# define SOFTRESET_I2C_MASTER (1 << 1)
124#define REG_DDC_DISABLE REG(0x00, 0x0b) /* read/write */
125#define REG_CCLK_ON REG(0x00, 0x0c) /* read/write */
126#define REG_I2C_MASTER REG(0x00, 0x0d) /* read/write */
127# define I2C_MASTER_DIS_MM (1 << 0)
128# define I2C_MASTER_DIS_FILT (1 << 1)
129# define I2C_MASTER_APP_STRT_LAT (1 << 2)
130#define REG_FEAT_POWERDOWN REG(0x00, 0x0e) /* read/write */
131# define FEAT_POWERDOWN_PREFILT BIT(0)
132# define FEAT_POWERDOWN_CSC BIT(1)
133# define FEAT_POWERDOWN_SPDIF (1 << 3)
134#define REG_INT_FLAGS_0 REG(0x00, 0x0f) /* read/write */
135#define REG_INT_FLAGS_1 REG(0x00, 0x10) /* read/write */
136#define REG_INT_FLAGS_2 REG(0x00, 0x11) /* read/write */
137# define INT_FLAGS_2_EDID_BLK_RD (1 << 1)
138#define REG_ENA_ACLK REG(0x00, 0x16) /* read/write */
139#define REG_ENA_VP_0 REG(0x00, 0x18) /* read/write */
140#define REG_ENA_VP_1 REG(0x00, 0x19) /* read/write */
141#define REG_ENA_VP_2 REG(0x00, 0x1a) /* read/write */
142#define REG_ENA_AP REG(0x00, 0x1e) /* read/write */
143#define REG_VIP_CNTRL_0 REG(0x00, 0x20) /* write */
144# define VIP_CNTRL_0_MIRR_A (1 << 7)
145# define VIP_CNTRL_0_SWAP_A(x) (((x) & 7) << 4)
146# define VIP_CNTRL_0_MIRR_B (1 << 3)
147# define VIP_CNTRL_0_SWAP_B(x) (((x) & 7) << 0)
148#define REG_VIP_CNTRL_1 REG(0x00, 0x21) /* write */
149# define VIP_CNTRL_1_MIRR_C (1 << 7)
150# define VIP_CNTRL_1_SWAP_C(x) (((x) & 7) << 4)
151# define VIP_CNTRL_1_MIRR_D (1 << 3)
152# define VIP_CNTRL_1_SWAP_D(x) (((x) & 7) << 0)
153#define REG_VIP_CNTRL_2 REG(0x00, 0x22) /* write */
154# define VIP_CNTRL_2_MIRR_E (1 << 7)
155# define VIP_CNTRL_2_SWAP_E(x) (((x) & 7) << 4)
156# define VIP_CNTRL_2_MIRR_F (1 << 3)
157# define VIP_CNTRL_2_SWAP_F(x) (((x) & 7) << 0)
158#define REG_VIP_CNTRL_3 REG(0x00, 0x23) /* write */
159# define VIP_CNTRL_3_X_TGL (1 << 0)
160# define VIP_CNTRL_3_H_TGL (1 << 1)
161# define VIP_CNTRL_3_V_TGL (1 << 2)
162# define VIP_CNTRL_3_EMB (1 << 3)
163# define VIP_CNTRL_3_SYNC_DE (1 << 4)
164# define VIP_CNTRL_3_SYNC_HS (1 << 5)
165# define VIP_CNTRL_3_DE_INT (1 << 6)
166# define VIP_CNTRL_3_EDGE (1 << 7)
167#define REG_VIP_CNTRL_4 REG(0x00, 0x24) /* write */
168# define VIP_CNTRL_4_BLC(x) (((x) & 3) << 0)
169# define VIP_CNTRL_4_BLANKIT(x) (((x) & 3) << 2)
170# define VIP_CNTRL_4_CCIR656 (1 << 4)
171# define VIP_CNTRL_4_656_ALT (1 << 5)
172# define VIP_CNTRL_4_TST_656 (1 << 6)
173# define VIP_CNTRL_4_TST_PAT (1 << 7)
174#define REG_VIP_CNTRL_5 REG(0x00, 0x25) /* write */
175# define VIP_CNTRL_5_CKCASE (1 << 0)
176# define VIP_CNTRL_5_SP_CNT(x) (((x) & 3) << 1)
177#define REG_MUX_AP REG(0x00, 0x26) /* read/write */
178# define MUX_AP_SELECT_I2S 0x64
179# define MUX_AP_SELECT_SPDIF 0x40
180#define REG_MUX_VP_VIP_OUT REG(0x00, 0x27) /* read/write */
181#define REG_MAT_CONTRL REG(0x00, 0x80) /* write */
182# define MAT_CONTRL_MAT_SC(x) (((x) & 3) << 0)
183# define MAT_CONTRL_MAT_BP (1 << 2)
184#define REG_VIDFORMAT REG(0x00, 0xa0) /* write */
185#define REG_REFPIX_MSB REG(0x00, 0xa1) /* write */
186#define REG_REFPIX_LSB REG(0x00, 0xa2) /* write */
187#define REG_REFLINE_MSB REG(0x00, 0xa3) /* write */
188#define REG_REFLINE_LSB REG(0x00, 0xa4) /* write */
189#define REG_NPIX_MSB REG(0x00, 0xa5) /* write */
190#define REG_NPIX_LSB REG(0x00, 0xa6) /* write */
191#define REG_NLINE_MSB REG(0x00, 0xa7) /* write */
192#define REG_NLINE_LSB REG(0x00, 0xa8) /* write */
193#define REG_VS_LINE_STRT_1_MSB REG(0x00, 0xa9) /* write */
194#define REG_VS_LINE_STRT_1_LSB REG(0x00, 0xaa) /* write */
195#define REG_VS_PIX_STRT_1_MSB REG(0x00, 0xab) /* write */
196#define REG_VS_PIX_STRT_1_LSB REG(0x00, 0xac) /* write */
197#define REG_VS_LINE_END_1_MSB REG(0x00, 0xad) /* write */
198#define REG_VS_LINE_END_1_LSB REG(0x00, 0xae) /* write */
199#define REG_VS_PIX_END_1_MSB REG(0x00, 0xaf) /* write */
200#define REG_VS_PIX_END_1_LSB REG(0x00, 0xb0) /* write */
201#define REG_VS_LINE_STRT_2_MSB REG(0x00, 0xb1) /* write */
202#define REG_VS_LINE_STRT_2_LSB REG(0x00, 0xb2) /* write */
203#define REG_VS_PIX_STRT_2_MSB REG(0x00, 0xb3) /* write */
204#define REG_VS_PIX_STRT_2_LSB REG(0x00, 0xb4) /* write */
205#define REG_VS_LINE_END_2_MSB REG(0x00, 0xb5) /* write */
206#define REG_VS_LINE_END_2_LSB REG(0x00, 0xb6) /* write */
207#define REG_VS_PIX_END_2_MSB REG(0x00, 0xb7) /* write */
208#define REG_VS_PIX_END_2_LSB REG(0x00, 0xb8) /* write */
209#define REG_HS_PIX_START_MSB REG(0x00, 0xb9) /* write */
210#define REG_HS_PIX_START_LSB REG(0x00, 0xba) /* write */
211#define REG_HS_PIX_STOP_MSB REG(0x00, 0xbb) /* write */
212#define REG_HS_PIX_STOP_LSB REG(0x00, 0xbc) /* write */
213#define REG_VWIN_START_1_MSB REG(0x00, 0xbd) /* write */
214#define REG_VWIN_START_1_LSB REG(0x00, 0xbe) /* write */
215#define REG_VWIN_END_1_MSB REG(0x00, 0xbf) /* write */
216#define REG_VWIN_END_1_LSB REG(0x00, 0xc0) /* write */
217#define REG_VWIN_START_2_MSB REG(0x00, 0xc1) /* write */
218#define REG_VWIN_START_2_LSB REG(0x00, 0xc2) /* write */
219#define REG_VWIN_END_2_MSB REG(0x00, 0xc3) /* write */
220#define REG_VWIN_END_2_LSB REG(0x00, 0xc4) /* write */
221#define REG_DE_START_MSB REG(0x00, 0xc5) /* write */
222#define REG_DE_START_LSB REG(0x00, 0xc6) /* write */
223#define REG_DE_STOP_MSB REG(0x00, 0xc7) /* write */
224#define REG_DE_STOP_LSB REG(0x00, 0xc8) /* write */
225#define REG_TBG_CNTRL_0 REG(0x00, 0xca) /* write */
226# define TBG_CNTRL_0_TOP_TGL (1 << 0)
227# define TBG_CNTRL_0_TOP_SEL (1 << 1)
228# define TBG_CNTRL_0_DE_EXT (1 << 2)
229# define TBG_CNTRL_0_TOP_EXT (1 << 3)
230# define TBG_CNTRL_0_FRAME_DIS (1 << 5)
231# define TBG_CNTRL_0_SYNC_MTHD (1 << 6)
232# define TBG_CNTRL_0_SYNC_ONCE (1 << 7)
233#define REG_TBG_CNTRL_1 REG(0x00, 0xcb) /* write */
234# define TBG_CNTRL_1_H_TGL (1 << 0)
235# define TBG_CNTRL_1_V_TGL (1 << 1)
236# define TBG_CNTRL_1_TGL_EN (1 << 2)
237# define TBG_CNTRL_1_X_EXT (1 << 3)
238# define TBG_CNTRL_1_H_EXT (1 << 4)
239# define TBG_CNTRL_1_V_EXT (1 << 5)
240# define TBG_CNTRL_1_DWIN_DIS (1 << 6)
241#define REG_ENABLE_SPACE REG(0x00, 0xd6) /* write */
242#define REG_HVF_CNTRL_0 REG(0x00, 0xe4) /* write */
243# define HVF_CNTRL_0_SM (1 << 7)
244# define HVF_CNTRL_0_RWB (1 << 6)
245# define HVF_CNTRL_0_PREFIL(x) (((x) & 3) << 2)
246# define HVF_CNTRL_0_INTPOL(x) (((x) & 3) << 0)
247#define REG_HVF_CNTRL_1 REG(0x00, 0xe5) /* write */
248# define HVF_CNTRL_1_FOR (1 << 0)
249# define HVF_CNTRL_1_YUVBLK (1 << 1)
250# define HVF_CNTRL_1_VQR(x) (((x) & 3) << 2)
251# define HVF_CNTRL_1_PAD(x) (((x) & 3) << 4)
252# define HVF_CNTRL_1_SEMI_PLANAR (1 << 6)
253#define REG_RPT_CNTRL REG(0x00, 0xf0) /* write */
254# define RPT_CNTRL_REPEAT(x) ((x) & 15)
255#define REG_I2S_FORMAT REG(0x00, 0xfc) /* read/write */
256# define I2S_FORMAT_PHILIPS (0 << 0)
257# define I2S_FORMAT_LEFT_J (2 << 0)
258# define I2S_FORMAT_RIGHT_J (3 << 0)
259#define REG_AIP_CLKSEL REG(0x00, 0xfd) /* write */
260# define AIP_CLKSEL_AIP_SPDIF (0 << 3)
261# define AIP_CLKSEL_AIP_I2S (1 << 3)
262# define AIP_CLKSEL_FS_ACLK (0 << 0)
263# define AIP_CLKSEL_FS_MCLK (1 << 0)
264# define AIP_CLKSEL_FS_FS64SPDIF (2 << 0)
265
266/* Page 02h: PLL settings */
267#define REG_PLL_SERIAL_1 REG(0x02, 0x00) /* read/write */
268# define PLL_SERIAL_1_SRL_FDN (1 << 0)
269# define PLL_SERIAL_1_SRL_IZ(x) (((x) & 3) << 1)
270# define PLL_SERIAL_1_SRL_MAN_IZ (1 << 6)
271#define REG_PLL_SERIAL_2 REG(0x02, 0x01) /* read/write */
272# define PLL_SERIAL_2_SRL_NOSC(x) ((x) << 0)
273# define PLL_SERIAL_2_SRL_PR(x) (((x) & 0xf) << 4)
274#define REG_PLL_SERIAL_3 REG(0x02, 0x02) /* read/write */
275# define PLL_SERIAL_3_SRL_CCIR (1 << 0)
276# define PLL_SERIAL_3_SRL_DE (1 << 2)
277# define PLL_SERIAL_3_SRL_PXIN_SEL (1 << 4)
278#define REG_SERIALIZER REG(0x02, 0x03) /* read/write */
279#define REG_BUFFER_OUT REG(0x02, 0x04) /* read/write */
280#define REG_PLL_SCG1 REG(0x02, 0x05) /* read/write */
281#define REG_PLL_SCG2 REG(0x02, 0x06) /* read/write */
282#define REG_PLL_SCGN1 REG(0x02, 0x07) /* read/write */
283#define REG_PLL_SCGN2 REG(0x02, 0x08) /* read/write */
284#define REG_PLL_SCGR1 REG(0x02, 0x09) /* read/write */
285#define REG_PLL_SCGR2 REG(0x02, 0x0a) /* read/write */
286#define REG_AUDIO_DIV REG(0x02, 0x0e) /* read/write */
287# define AUDIO_DIV_SERCLK_1 0
288# define AUDIO_DIV_SERCLK_2 1
289# define AUDIO_DIV_SERCLK_4 2
290# define AUDIO_DIV_SERCLK_8 3
291# define AUDIO_DIV_SERCLK_16 4
292# define AUDIO_DIV_SERCLK_32 5
293#define REG_SEL_CLK REG(0x02, 0x11) /* read/write */
294# define SEL_CLK_SEL_CLK1 (1 << 0)
295# define SEL_CLK_SEL_VRF_CLK(x) (((x) & 3) << 1)
296# define SEL_CLK_ENA_SC_CLK (1 << 3)
297#define REG_ANA_GENERAL REG(0x02, 0x12) /* read/write */
298
299
300/* Page 09h: EDID Control */
301#define REG_EDID_DATA_0 REG(0x09, 0x00) /* read */
302/* next 127 successive registers are the EDID block */
303#define REG_EDID_CTRL REG(0x09, 0xfa) /* read/write */
304#define REG_DDC_ADDR REG(0x09, 0xfb) /* read/write */
305#define REG_DDC_OFFS REG(0x09, 0xfc) /* read/write */
306#define REG_DDC_SEGM_ADDR REG(0x09, 0xfd) /* read/write */
307#define REG_DDC_SEGM REG(0x09, 0xfe) /* read/write */
308
309
310/* Page 10h: information frames and packets */
311#define REG_IF1_HB0 REG(0x10, 0x20) /* read/write */
312#define REG_IF2_HB0 REG(0x10, 0x40) /* read/write */
313#define REG_IF3_HB0 REG(0x10, 0x60) /* read/write */
314#define REG_IF4_HB0 REG(0x10, 0x80) /* read/write */
315#define REG_IF5_HB0 REG(0x10, 0xa0) /* read/write */
316
317
318/* Page 11h: audio settings and content info packets */
319#define REG_AIP_CNTRL_0 REG(0x11, 0x00) /* read/write */
320# define AIP_CNTRL_0_RST_FIFO (1 << 0)
321# define AIP_CNTRL_0_SWAP (1 << 1)
322# define AIP_CNTRL_0_LAYOUT (1 << 2)
323# define AIP_CNTRL_0_ACR_MAN (1 << 5)
324# define AIP_CNTRL_0_RST_CTS (1 << 6)
325#define REG_CA_I2S REG(0x11, 0x01) /* read/write */
326# define CA_I2S_CA_I2S(x) (((x) & 31) << 0)
327# define CA_I2S_HBR_CHSTAT (1 << 6)
328#define REG_LATENCY_RD REG(0x11, 0x04) /* read/write */
329#define REG_ACR_CTS_0 REG(0x11, 0x05) /* read/write */
330#define REG_ACR_CTS_1 REG(0x11, 0x06) /* read/write */
331#define REG_ACR_CTS_2 REG(0x11, 0x07) /* read/write */
332#define REG_ACR_N_0 REG(0x11, 0x08) /* read/write */
333#define REG_ACR_N_1 REG(0x11, 0x09) /* read/write */
334#define REG_ACR_N_2 REG(0x11, 0x0a) /* read/write */
335#define REG_CTS_N REG(0x11, 0x0c) /* read/write */
336# define CTS_N_K(x) (((x) & 7) << 0)
337# define CTS_N_M(x) (((x) & 3) << 4)
338#define REG_ENC_CNTRL REG(0x11, 0x0d) /* read/write */
339# define ENC_CNTRL_RST_ENC (1 << 0)
340# define ENC_CNTRL_RST_SEL (1 << 1)
341# define ENC_CNTRL_CTL_CODE(x) (((x) & 3) << 2)
342#define REG_DIP_FLAGS REG(0x11, 0x0e) /* read/write */
343# define DIP_FLAGS_ACR (1 << 0)
344# define DIP_FLAGS_GC (1 << 1)
345#define REG_DIP_IF_FLAGS REG(0x11, 0x0f) /* read/write */
346# define DIP_IF_FLAGS_IF1 (1 << 1)
347# define DIP_IF_FLAGS_IF2 (1 << 2)
348# define DIP_IF_FLAGS_IF3 (1 << 3)
349# define DIP_IF_FLAGS_IF4 (1 << 4)
350# define DIP_IF_FLAGS_IF5 (1 << 5)
351#define REG_CH_STAT_B(x) REG(0x11, 0x14 + (x)) /* read/write */
352
353
354/* Page 12h: HDCP and OTP */
355#define REG_TX3 REG(0x12, 0x9a) /* read/write */
356#define REG_TX4 REG(0x12, 0x9b) /* read/write */
357# define TX4_PD_RAM (1 << 1)
358#define REG_TX33 REG(0x12, 0xb8) /* read/write */
359# define TX33_HDMI (1 << 1)
360
361
362/* Page 13h: Gamut related metadata packets */
363
364
365
366/* CEC registers: (not paged)
367 */
368#define REG_CEC_INTSTATUS 0xee /* read */
369# define CEC_INTSTATUS_CEC (1 << 0)
370# define CEC_INTSTATUS_HDMI (1 << 1)
371#define REG_CEC_CAL_XOSC_CTRL1 0xf2
372# define CEC_CAL_XOSC_CTRL1_ENA_CAL BIT(0)
373#define REG_CEC_DES_FREQ2 0xf5
374# define CEC_DES_FREQ2_DIS_AUTOCAL BIT(7)
375#define REG_CEC_CLK 0xf6
376# define CEC_CLK_FRO 0x11
377#define REG_CEC_FRO_IM_CLK_CTRL 0xfb /* read/write */
378# define CEC_FRO_IM_CLK_CTRL_GHOST_DIS (1 << 7)
379# define CEC_FRO_IM_CLK_CTRL_ENA_OTP (1 << 6)
380# define CEC_FRO_IM_CLK_CTRL_IMCLK_SEL (1 << 1)
381# define CEC_FRO_IM_CLK_CTRL_FRO_DIV (1 << 0)
382#define REG_CEC_RXSHPDINTENA 0xfc /* read/write */
383#define REG_CEC_RXSHPDINT 0xfd /* read */
384# define CEC_RXSHPDINT_RXSENS BIT(0)
385# define CEC_RXSHPDINT_HPD BIT(1)
386#define REG_CEC_RXSHPDLEV 0xfe /* read */
387# define CEC_RXSHPDLEV_RXSENS (1 << 0)
388# define CEC_RXSHPDLEV_HPD (1 << 1)
389
390#define REG_CEC_ENAMODS 0xff /* read/write */
391# define CEC_ENAMODS_EN_CEC_CLK (1 << 7)
392# define CEC_ENAMODS_DIS_FRO (1 << 6)
393# define CEC_ENAMODS_DIS_CCLK (1 << 5)
394# define CEC_ENAMODS_EN_RXSENS (1 << 2)
395# define CEC_ENAMODS_EN_HDMI (1 << 1)
396# define CEC_ENAMODS_EN_CEC (1 << 0)
397
398
399/* Device versions: */
400#define TDA9989N2 0x0101
401#define TDA19989 0x0201
402#define TDA19989N2 0x0202
403#define TDA19988 0x0301
404
405static void
406cec_write(struct tda998x_priv *priv, u16 addr, u8 val)
407{
408 u8 buf[] = {addr, val};
409 struct i2c_msg msg = {
410 .addr = priv->cec_addr,
411 .len = 2,
412 .buf = buf,
413 };
414 int ret;
415
416 ret = i2c_transfer(priv->hdmi->adapter, &msg, 1);
417 if (ret < 0)
418 dev_err(&priv->hdmi->dev, "Error %d writing to cec:0x%x\n",
419 ret, addr);
420}
421
422static u8
423cec_read(struct tda998x_priv *priv, u8 addr)
424{
425 u8 val;
426 struct i2c_msg msg[2] = {
427 {
428 .addr = priv->cec_addr,
429 .len = 1,
430 .buf = &addr,
431 }, {
432 .addr = priv->cec_addr,
433 .flags = I2C_M_RD,
434 .len = 1,
435 .buf = &val,
436 },
437 };
438 int ret;
439
440 ret = i2c_transfer(priv->hdmi->adapter, msg, ARRAY_SIZE(msg));
441 if (ret < 0) {
442 dev_err(&priv->hdmi->dev, "Error %d reading from cec:0x%x\n",
443 ret, addr);
444 val = 0;
445 }
446
447 return val;
448}
449
450static void cec_enamods(struct tda998x_priv *priv, u8 mods, bool enable)
451{
452 int val = cec_read(priv, REG_CEC_ENAMODS);
453
454 if (val < 0)
455 return;
456
457 if (enable)
458 val |= mods;
459 else
460 val &= ~mods;
461
462 cec_write(priv, REG_CEC_ENAMODS, val);
463}
464
465static void tda998x_cec_set_calibration(struct tda998x_priv *priv, bool enable)
466{
467 if (enable) {
468 u8 val;
469
470 cec_write(priv, 0xf3, 0xc0);
471 cec_write(priv, 0xf4, 0xd4);
472
473 /* Enable automatic calibration mode */
474 val = cec_read(priv, REG_CEC_DES_FREQ2);
475 val &= ~CEC_DES_FREQ2_DIS_AUTOCAL;
476 cec_write(priv, REG_CEC_DES_FREQ2, val);
477
478 /* Enable free running oscillator */
479 cec_write(priv, REG_CEC_CLK, CEC_CLK_FRO);
480 cec_enamods(priv, CEC_ENAMODS_DIS_FRO, false);
481
482 cec_write(priv, REG_CEC_CAL_XOSC_CTRL1,
483 CEC_CAL_XOSC_CTRL1_ENA_CAL);
484 } else {
485 cec_write(priv, REG_CEC_CAL_XOSC_CTRL1, 0);
486 }
487}
488
489/*
490 * Calibration for the internal oscillator: we need to set calibration mode,
491 * and then pulse the IRQ line low for a 10ms ± 1% period.
492 */
493static void tda998x_cec_calibration(struct tda998x_priv *priv)
494{
495 struct gpio_desc *calib = priv->calib;
496
497 mutex_lock(&priv->edid_mutex);
498 if (priv->hdmi->irq > 0)
499 disable_irq(priv->hdmi->irq);
500 gpiod_direction_output(calib, 1);
501 tda998x_cec_set_calibration(priv, true);
502
503 local_irq_disable();
504 gpiod_set_value(calib, 0);
505 mdelay(10);
506 gpiod_set_value(calib, 1);
507 local_irq_enable();
508
509 tda998x_cec_set_calibration(priv, false);
510 gpiod_direction_input(calib);
511 if (priv->hdmi->irq > 0)
512 enable_irq(priv->hdmi->irq);
513 mutex_unlock(&priv->edid_mutex);
514}
515
516static int tda998x_cec_hook_init(void *data)
517{
518 struct tda998x_priv *priv = data;
519 struct gpio_desc *calib;
520
521 calib = gpiod_get(&priv->hdmi->dev, "nxp,calib", GPIOD_ASIS);
522 if (IS_ERR(calib)) {
523 dev_warn(&priv->hdmi->dev, "failed to get calibration gpio: %ld\n",
524 PTR_ERR(calib));
525 return PTR_ERR(calib);
526 }
527
528 priv->calib = calib;
529
530 return 0;
531}
532
533static void tda998x_cec_hook_exit(void *data)
534{
535 struct tda998x_priv *priv = data;
536
537 gpiod_put(priv->calib);
538 priv->calib = NULL;
539}
540
541static int tda998x_cec_hook_open(void *data)
542{
543 struct tda998x_priv *priv = data;
544
545 cec_enamods(priv, CEC_ENAMODS_EN_CEC_CLK | CEC_ENAMODS_EN_CEC, true);
546 tda998x_cec_calibration(priv);
547
548 return 0;
549}
550
551static void tda998x_cec_hook_release(void *data)
552{
553 struct tda998x_priv *priv = data;
554
555 cec_enamods(priv, CEC_ENAMODS_EN_CEC_CLK | CEC_ENAMODS_EN_CEC, false);
556}
557
558static int
559set_page(struct tda998x_priv *priv, u16 reg)
560{
561 if (REG2PAGE(reg) != priv->current_page) {
562 struct i2c_client *client = priv->hdmi;
563 u8 buf[] = {
564 REG_CURPAGE, REG2PAGE(reg)
565 };
566 int ret = i2c_master_send(client, buf, sizeof(buf));
567 if (ret < 0) {
568 dev_err(&client->dev, "%s %04x err %d\n", __func__,
569 reg, ret);
570 return ret;
571 }
572
573 priv->current_page = REG2PAGE(reg);
574 }
575 return 0;
576}
577
578static int
579reg_read_range(struct tda998x_priv *priv, u16 reg, char *buf, int cnt)
580{
581 struct i2c_client *client = priv->hdmi;
582 u8 addr = REG2ADDR(reg);
583 int ret;
584
585 mutex_lock(&priv->mutex);
586 ret = set_page(priv, reg);
587 if (ret < 0)
588 goto out;
589
590 ret = i2c_master_send(client, &addr, sizeof(addr));
591 if (ret < 0)
592 goto fail;
593
594 ret = i2c_master_recv(client, buf, cnt);
595 if (ret < 0)
596 goto fail;
597
598 goto out;
599
600fail:
601 dev_err(&client->dev, "Error %d reading from 0x%x\n", ret, reg);
602out:
603 mutex_unlock(&priv->mutex);
604 return ret;
605}
606
607#define MAX_WRITE_RANGE_BUF 32
608
609static void
610reg_write_range(struct tda998x_priv *priv, u16 reg, u8 *p, int cnt)
611{
612 struct i2c_client *client = priv->hdmi;
613 /* This is the maximum size of the buffer passed in */
614 u8 buf[MAX_WRITE_RANGE_BUF + 1];
615 int ret;
616
617 if (cnt > MAX_WRITE_RANGE_BUF) {
618 dev_err(&client->dev, "Fixed write buffer too small (%d)\n",
619 MAX_WRITE_RANGE_BUF);
620 return;
621 }
622
623 buf[0] = REG2ADDR(reg);
624 memcpy(&buf[1], p, cnt);
625
626 mutex_lock(&priv->mutex);
627 ret = set_page(priv, reg);
628 if (ret < 0)
629 goto out;
630
631 ret = i2c_master_send(client, buf, cnt + 1);
632 if (ret < 0)
633 dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
634out:
635 mutex_unlock(&priv->mutex);
636}
637
638static int
639reg_read(struct tda998x_priv *priv, u16 reg)
640{
641 u8 val = 0;
642 int ret;
643
644 ret = reg_read_range(priv, reg, &val, sizeof(val));
645 if (ret < 0)
646 return ret;
647 return val;
648}
649
650static void
651reg_write(struct tda998x_priv *priv, u16 reg, u8 val)
652{
653 struct i2c_client *client = priv->hdmi;
654 u8 buf[] = {REG2ADDR(reg), val};
655 int ret;
656
657 mutex_lock(&priv->mutex);
658 ret = set_page(priv, reg);
659 if (ret < 0)
660 goto out;
661
662 ret = i2c_master_send(client, buf, sizeof(buf));
663 if (ret < 0)
664 dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
665out:
666 mutex_unlock(&priv->mutex);
667}
668
669static void
670reg_write16(struct tda998x_priv *priv, u16 reg, u16 val)
671{
672 struct i2c_client *client = priv->hdmi;
673 u8 buf[] = {REG2ADDR(reg), val >> 8, val};
674 int ret;
675
676 mutex_lock(&priv->mutex);
677 ret = set_page(priv, reg);
678 if (ret < 0)
679 goto out;
680
681 ret = i2c_master_send(client, buf, sizeof(buf));
682 if (ret < 0)
683 dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
684out:
685 mutex_unlock(&priv->mutex);
686}
687
688static void
689reg_set(struct tda998x_priv *priv, u16 reg, u8 val)
690{
691 int old_val;
692
693 old_val = reg_read(priv, reg);
694 if (old_val >= 0)
695 reg_write(priv, reg, old_val | val);
696}
697
698static void
699reg_clear(struct tda998x_priv *priv, u16 reg, u8 val)
700{
701 int old_val;
702
703 old_val = reg_read(priv, reg);
704 if (old_val >= 0)
705 reg_write(priv, reg, old_val & ~val);
706}
707
708static void
709tda998x_reset(struct tda998x_priv *priv)
710{
711 /* reset audio and i2c master: */
712 reg_write(priv, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER);
713 msleep(50);
714 reg_write(priv, REG_SOFTRESET, 0);
715 msleep(50);
716
717 /* reset transmitter: */
718 reg_set(priv, REG_MAIN_CNTRL0, MAIN_CNTRL0_SR);
719 reg_clear(priv, REG_MAIN_CNTRL0, MAIN_CNTRL0_SR);
720
721 /* PLL registers common configuration */
722 reg_write(priv, REG_PLL_SERIAL_1, 0x00);
723 reg_write(priv, REG_PLL_SERIAL_2, PLL_SERIAL_2_SRL_NOSC(1));
724 reg_write(priv, REG_PLL_SERIAL_3, 0x00);
725 reg_write(priv, REG_SERIALIZER, 0x00);
726 reg_write(priv, REG_BUFFER_OUT, 0x00);
727 reg_write(priv, REG_PLL_SCG1, 0x00);
728 reg_write(priv, REG_AUDIO_DIV, AUDIO_DIV_SERCLK_8);
729 reg_write(priv, REG_SEL_CLK, SEL_CLK_SEL_CLK1 | SEL_CLK_ENA_SC_CLK);
730 reg_write(priv, REG_PLL_SCGN1, 0xfa);
731 reg_write(priv, REG_PLL_SCGN2, 0x00);
732 reg_write(priv, REG_PLL_SCGR1, 0x5b);
733 reg_write(priv, REG_PLL_SCGR2, 0x00);
734 reg_write(priv, REG_PLL_SCG2, 0x10);
735
736 /* Write the default value MUX register */
737 reg_write(priv, REG_MUX_VP_VIP_OUT, 0x24);
738}
739
740/*
741 * The TDA998x has a problem when trying to read the EDID close to a
742 * HPD assertion: it needs a delay of 100ms to avoid timing out while
743 * trying to read EDID data.
744 *
745 * However, tda998x_connector_get_modes() may be called at any moment
746 * after tda998x_connector_detect() indicates that we are connected, so
747 * we need to delay probing modes in tda998x_connector_get_modes() after
748 * we have seen a HPD inactive->active transition. This code implements
749 * that delay.
750 */
751static void tda998x_edid_delay_done(struct timer_list *t)
752{
753 struct tda998x_priv *priv = timer_container_of(priv, t,
754 edid_delay_timer);
755
756 priv->edid_delay_active = false;
757 wake_up(&priv->edid_delay_waitq);
758 schedule_work(&priv->detect_work);
759}
760
761static void tda998x_edid_delay_start(struct tda998x_priv *priv)
762{
763 priv->edid_delay_active = true;
764 mod_timer(&priv->edid_delay_timer, jiffies + HZ/10);
765}
766
767static int tda998x_edid_delay_wait(struct tda998x_priv *priv)
768{
769 return wait_event_killable(priv->edid_delay_waitq, !priv->edid_delay_active);
770}
771
772/*
773 * We need to run the KMS hotplug event helper outside of our threaded
774 * interrupt routine as this can call back into our get_modes method,
775 * which will want to make use of interrupts.
776 */
777static void tda998x_detect_work(struct work_struct *work)
778{
779 struct tda998x_priv *priv =
780 container_of(work, struct tda998x_priv, detect_work);
781 struct drm_device *dev = priv->connector.dev;
782
783 if (dev)
784 drm_kms_helper_hotplug_event(dev);
785}
786
787/*
788 * only 2 interrupts may occur: screen plug/unplug and EDID read
789 */
790static irqreturn_t tda998x_irq_thread(int irq, void *data)
791{
792 struct tda998x_priv *priv = data;
793 u8 sta, cec, lvl, flag0, flag1, flag2;
794 bool handled = false;
795
796 sta = cec_read(priv, REG_CEC_INTSTATUS);
797 if (sta & CEC_INTSTATUS_HDMI) {
798 cec = cec_read(priv, REG_CEC_RXSHPDINT);
799 lvl = cec_read(priv, REG_CEC_RXSHPDLEV);
800 flag0 = reg_read(priv, REG_INT_FLAGS_0);
801 flag1 = reg_read(priv, REG_INT_FLAGS_1);
802 flag2 = reg_read(priv, REG_INT_FLAGS_2);
803 DRM_DEBUG_DRIVER(
804 "tda irq sta %02x cec %02x lvl %02x f0 %02x f1 %02x f2 %02x\n",
805 sta, cec, lvl, flag0, flag1, flag2);
806
807 if (cec & CEC_RXSHPDINT_HPD) {
808 if (lvl & CEC_RXSHPDLEV_HPD) {
809 tda998x_edid_delay_start(priv);
810 } else {
811 schedule_work(&priv->detect_work);
812 cec_notifier_phys_addr_invalidate(
813 priv->cec_notify);
814 }
815
816 handled = true;
817 }
818
819 if ((flag2 & INT_FLAGS_2_EDID_BLK_RD) && priv->wq_edid_wait) {
820 priv->wq_edid_wait = 0;
821 wake_up(&priv->wq_edid);
822 handled = true;
823 }
824 }
825
826 return IRQ_RETVAL(handled);
827}
828
829static void
830tda998x_write_if(struct tda998x_priv *priv, u8 bit, u16 addr,
831 union hdmi_infoframe *frame)
832{
833 u8 buf[MAX_WRITE_RANGE_BUF];
834 ssize_t len;
835
836 len = hdmi_infoframe_pack(frame, buf, sizeof(buf));
837 if (len < 0) {
838 dev_err(&priv->hdmi->dev,
839 "hdmi_infoframe_pack() type=0x%02x failed: %zd\n",
840 frame->any.type, len);
841 return;
842 }
843
844 reg_clear(priv, REG_DIP_IF_FLAGS, bit);
845 reg_write_range(priv, addr, buf, len);
846 reg_set(priv, REG_DIP_IF_FLAGS, bit);
847}
848
849static void tda998x_write_aif(struct tda998x_priv *priv,
850 const struct hdmi_audio_infoframe *cea)
851{
852 union hdmi_infoframe frame;
853
854 frame.audio = *cea;
855
856 tda998x_write_if(priv, DIP_IF_FLAGS_IF4, REG_IF4_HB0, &frame);
857}
858
859static void
860tda998x_write_avi(struct tda998x_priv *priv, const struct drm_display_mode *mode)
861{
862 union hdmi_infoframe frame;
863
864 drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
865 &priv->connector, mode);
866 frame.avi.quantization_range = HDMI_QUANTIZATION_RANGE_FULL;
867 drm_hdmi_avi_infoframe_quant_range(&frame.avi, &priv->connector, mode,
868 priv->rgb_quant_range);
869
870 tda998x_write_if(priv, DIP_IF_FLAGS_IF2, REG_IF2_HB0, &frame);
871}
872
873static void tda998x_write_vsi(struct tda998x_priv *priv,
874 const struct drm_display_mode *mode)
875{
876 union hdmi_infoframe frame;
877
878 if (drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
879 &priv->connector,
880 mode))
881 reg_clear(priv, REG_DIP_IF_FLAGS, DIP_IF_FLAGS_IF1);
882 else
883 tda998x_write_if(priv, DIP_IF_FLAGS_IF1, REG_IF1_HB0, &frame);
884}
885
886/* Audio support */
887
888static const struct tda998x_audio_route tda998x_audio_route[AUDIO_ROUTE_NUM] = {
889 [AUDIO_ROUTE_I2S] = {
890 .ena_aclk = 1,
891 .mux_ap = MUX_AP_SELECT_I2S,
892 .aip_clksel = AIP_CLKSEL_AIP_I2S | AIP_CLKSEL_FS_ACLK,
893 },
894 [AUDIO_ROUTE_SPDIF] = {
895 .ena_aclk = 0,
896 .mux_ap = MUX_AP_SELECT_SPDIF,
897 .aip_clksel = AIP_CLKSEL_AIP_SPDIF | AIP_CLKSEL_FS_FS64SPDIF,
898 },
899};
900
901/* Configure the TDA998x audio data and clock routing. */
902static int tda998x_derive_routing(struct tda998x_priv *priv,
903 struct tda998x_audio_settings *s,
904 unsigned int route)
905{
906 s->route = &tda998x_audio_route[route];
907 s->ena_ap = priv->audio_port_enable[route];
908 if (s->ena_ap == 0) {
909 dev_err(&priv->hdmi->dev, "no audio configuration found\n");
910 return -EINVAL;
911 }
912
913 return 0;
914}
915
916/*
917 * The audio clock divisor register controls a divider producing Audio_Clk_Out
918 * from SERclk by dividing it by 2^n where 0 <= n <= 5. We don't know what
919 * Audio_Clk_Out or SERclk are. We guess SERclk is the same as TMDS clock.
920 *
921 * It seems that Audio_Clk_Out must be the smallest value that is greater
922 * than 128*fs, otherwise audio does not function. There is some suggestion
923 * that 126*fs is a better value.
924 */
925static u8 tda998x_get_adiv(struct tda998x_priv *priv, unsigned int fs)
926{
927 unsigned long min_audio_clk = fs * 128;
928 unsigned long ser_clk = priv->tmds_clock * 1000;
929 u8 adiv;
930
931 for (adiv = AUDIO_DIV_SERCLK_32; adiv != AUDIO_DIV_SERCLK_1; adiv--)
932 if (ser_clk > min_audio_clk << adiv)
933 break;
934
935 dev_dbg(&priv->hdmi->dev,
936 "ser_clk=%luHz fs=%uHz min_aclk=%luHz adiv=%d\n",
937 ser_clk, fs, min_audio_clk, adiv);
938
939 return adiv;
940}
941
942/*
943 * In auto-CTS mode, the TDA998x uses a "measured time stamp" counter to
944 * generate the CTS value. It appears that the "measured time stamp" is
945 * the number of TDMS clock cycles within a number of audio input clock
946 * cycles defined by the k and N parameters defined below, in a similar
947 * way to that which is set out in the CTS generation in the HDMI spec.
948 *
949 * tmdsclk ----> mts -> /m ---> CTS
950 * ^
951 * sclk -> /k -> /N
952 *
953 * CTS = mts / m, where m is 2^M.
954 * /k is a divider based on the K value below, K+1 for K < 4, or 8 for K >= 4
955 * /N is a divider based on the HDMI specified N value.
956 *
957 * This produces the following equation:
958 * CTS = tmds_clock * k * N / (sclk * m)
959 *
960 * When combined with the sink-side equation, and realising that sclk is
961 * bclk_ratio * fs, we end up with:
962 * k = m * bclk_ratio / 128.
963 *
964 * Note: S/PDIF always uses a bclk_ratio of 64.
965 */
966static int tda998x_derive_cts_n(struct tda998x_priv *priv,
967 struct tda998x_audio_settings *settings,
968 unsigned int ratio)
969{
970 switch (ratio) {
971 case 16:
972 settings->cts_n = CTS_N_M(3) | CTS_N_K(0);
973 break;
974 case 32:
975 settings->cts_n = CTS_N_M(3) | CTS_N_K(1);
976 break;
977 case 48:
978 settings->cts_n = CTS_N_M(3) | CTS_N_K(2);
979 break;
980 case 64:
981 settings->cts_n = CTS_N_M(3) | CTS_N_K(3);
982 break;
983 case 128:
984 settings->cts_n = CTS_N_M(0) | CTS_N_K(0);
985 break;
986 default:
987 dev_err(&priv->hdmi->dev, "unsupported bclk ratio %ufs\n",
988 ratio);
989 return -EINVAL;
990 }
991 return 0;
992}
993
994static void tda998x_audio_mute(struct tda998x_priv *priv, bool on)
995{
996 if (on) {
997 reg_set(priv, REG_SOFTRESET, SOFTRESET_AUDIO);
998 reg_clear(priv, REG_SOFTRESET, SOFTRESET_AUDIO);
999 reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
1000 } else {
1001 reg_clear(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
1002 }
1003}
1004
1005static void tda998x_configure_audio(struct tda998x_priv *priv)
1006{
1007 const struct tda998x_audio_settings *settings = &priv->audio;
1008 u8 buf[6], adiv;
1009 u32 n;
1010
1011 /* If audio is not configured, there is nothing to do. */
1012 if (settings->ena_ap == 0)
1013 return;
1014
1015 adiv = tda998x_get_adiv(priv, settings->sample_rate);
1016
1017 /* Enable audio ports */
1018 reg_write(priv, REG_ENA_AP, settings->ena_ap);
1019 reg_write(priv, REG_ENA_ACLK, settings->route->ena_aclk);
1020 reg_write(priv, REG_MUX_AP, settings->route->mux_ap);
1021 reg_write(priv, REG_I2S_FORMAT, settings->i2s_format);
1022 reg_write(priv, REG_AIP_CLKSEL, settings->route->aip_clksel);
1023 reg_clear(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_LAYOUT |
1024 AIP_CNTRL_0_ACR_MAN); /* auto CTS */
1025 reg_write(priv, REG_CTS_N, settings->cts_n);
1026 reg_write(priv, REG_AUDIO_DIV, adiv);
1027
1028 /*
1029 * This is the approximate value of N, which happens to be
1030 * the recommended values for non-coherent clocks.
1031 */
1032 n = 128 * settings->sample_rate / 1000;
1033
1034 /* Write the CTS and N values */
1035 buf[0] = 0x44;
1036 buf[1] = 0x42;
1037 buf[2] = 0x01;
1038 buf[3] = n;
1039 buf[4] = n >> 8;
1040 buf[5] = n >> 16;
1041 reg_write_range(priv, REG_ACR_CTS_0, buf, 6);
1042
1043 /* Reset CTS generator */
1044 reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
1045 reg_clear(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
1046
1047 /* Write the channel status
1048 * The REG_CH_STAT_B-registers skip IEC958 AES2 byte, because
1049 * there is a separate register for each I2S wire.
1050 */
1051 buf[0] = settings->status[0];
1052 buf[1] = settings->status[1];
1053 buf[2] = settings->status[3];
1054 buf[3] = settings->status[4];
1055 reg_write_range(priv, REG_CH_STAT_B(0), buf, 4);
1056
1057 tda998x_audio_mute(priv, true);
1058 msleep(20);
1059 tda998x_audio_mute(priv, false);
1060
1061 tda998x_write_aif(priv, &settings->cea);
1062}
1063
1064static int tda998x_audio_hw_params(struct device *dev, void *data,
1065 struct hdmi_codec_daifmt *daifmt,
1066 struct hdmi_codec_params *params)
1067{
1068 struct tda998x_priv *priv = dev_get_drvdata(dev);
1069 unsigned int bclk_ratio;
1070 bool spdif = daifmt->fmt == HDMI_SPDIF;
1071 int ret;
1072 struct tda998x_audio_settings audio = {
1073 .sample_rate = params->sample_rate,
1074 .cea = params->cea,
1075 };
1076
1077 memcpy(audio.status, params->iec.status,
1078 min(sizeof(audio.status), sizeof(params->iec.status)));
1079
1080 switch (daifmt->fmt) {
1081 case HDMI_I2S:
1082 audio.i2s_format = I2S_FORMAT_PHILIPS;
1083 break;
1084 case HDMI_LEFT_J:
1085 audio.i2s_format = I2S_FORMAT_LEFT_J;
1086 break;
1087 case HDMI_RIGHT_J:
1088 audio.i2s_format = I2S_FORMAT_RIGHT_J;
1089 break;
1090 case HDMI_SPDIF:
1091 audio.i2s_format = 0;
1092 break;
1093 default:
1094 dev_err(dev, "%s: Invalid format %d\n", __func__, daifmt->fmt);
1095 return -EINVAL;
1096 }
1097
1098 if (!spdif &&
1099 (daifmt->bit_clk_inv || daifmt->frame_clk_inv ||
1100 daifmt->bit_clk_provider || daifmt->frame_clk_provider)) {
1101 dev_err(dev, "%s: Bad flags %d %d %d %d\n", __func__,
1102 daifmt->bit_clk_inv, daifmt->frame_clk_inv,
1103 daifmt->bit_clk_provider,
1104 daifmt->frame_clk_provider);
1105 return -EINVAL;
1106 }
1107
1108 ret = tda998x_derive_routing(priv, &audio, AUDIO_ROUTE_I2S + spdif);
1109 if (ret < 0)
1110 return ret;
1111
1112 bclk_ratio = spdif ? 64 : params->sample_width * 2;
1113 ret = tda998x_derive_cts_n(priv, &audio, bclk_ratio);
1114 if (ret < 0)
1115 return ret;
1116
1117 mutex_lock(&priv->audio_mutex);
1118 priv->audio = audio;
1119 if (priv->supports_infoframes && priv->sink_has_audio)
1120 tda998x_configure_audio(priv);
1121 mutex_unlock(&priv->audio_mutex);
1122
1123 return 0;
1124}
1125
1126static void tda998x_audio_shutdown(struct device *dev, void *data)
1127{
1128 struct tda998x_priv *priv = dev_get_drvdata(dev);
1129
1130 mutex_lock(&priv->audio_mutex);
1131
1132 reg_write(priv, REG_ENA_AP, 0);
1133 priv->audio.ena_ap = 0;
1134
1135 mutex_unlock(&priv->audio_mutex);
1136}
1137
1138static int tda998x_audio_mute_stream(struct device *dev, void *data,
1139 bool enable, int direction)
1140{
1141 struct tda998x_priv *priv = dev_get_drvdata(dev);
1142
1143 mutex_lock(&priv->audio_mutex);
1144
1145 tda998x_audio_mute(priv, enable);
1146
1147 mutex_unlock(&priv->audio_mutex);
1148 return 0;
1149}
1150
1151static int tda998x_audio_get_eld(struct device *dev, void *data,
1152 uint8_t *buf, size_t len)
1153{
1154 struct tda998x_priv *priv = dev_get_drvdata(dev);
1155
1156 mutex_lock(&priv->audio_mutex);
1157 memcpy(buf, priv->connector.eld,
1158 min(sizeof(priv->connector.eld), len));
1159 mutex_unlock(&priv->audio_mutex);
1160
1161 return 0;
1162}
1163
1164static const struct hdmi_codec_ops audio_codec_ops = {
1165 .hw_params = tda998x_audio_hw_params,
1166 .audio_shutdown = tda998x_audio_shutdown,
1167 .mute_stream = tda998x_audio_mute_stream,
1168 .get_eld = tda998x_audio_get_eld,
1169};
1170
1171static int tda998x_audio_codec_init(struct tda998x_priv *priv,
1172 struct device *dev)
1173{
1174 struct hdmi_codec_pdata codec_data = {
1175 .ops = &audio_codec_ops,
1176 .max_i2s_channels = 2,
1177 .no_i2s_capture = 1,
1178 .no_spdif_capture = 1,
1179 .no_capture_mute = 1,
1180 };
1181
1182 if (priv->audio_port_enable[AUDIO_ROUTE_I2S])
1183 codec_data.i2s = 1;
1184 if (priv->audio_port_enable[AUDIO_ROUTE_SPDIF])
1185 codec_data.spdif = 1;
1186
1187 priv->audio_pdev = platform_device_register_data(
1188 dev, HDMI_CODEC_DRV_NAME, PLATFORM_DEVID_AUTO,
1189 &codec_data, sizeof(codec_data));
1190
1191 return PTR_ERR_OR_ZERO(priv->audio_pdev);
1192}
1193
1194/* DRM connector functions */
1195
1196static enum drm_connector_status tda998x_conn_detect(struct tda998x_priv *priv)
1197{
1198 u8 val = cec_read(priv, REG_CEC_RXSHPDLEV);
1199
1200 return (val & CEC_RXSHPDLEV_HPD) ? connector_status_connected :
1201 connector_status_disconnected;
1202}
1203
1204static enum drm_connector_status
1205tda998x_connector_detect(struct drm_connector *connector, bool force)
1206{
1207 struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
1208
1209 return tda998x_conn_detect(priv);
1210}
1211
1212static const struct drm_connector_funcs tda998x_connector_funcs = {
1213 .reset = drm_atomic_helper_connector_reset,
1214 .fill_modes = drm_helper_probe_single_connector_modes,
1215 .detect = tda998x_connector_detect,
1216 .destroy = drm_connector_cleanup,
1217 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
1218 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
1219};
1220
1221static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
1222{
1223 struct tda998x_priv *priv = data;
1224 u8 offset, segptr;
1225 int ret, i;
1226
1227 offset = (blk & 1) ? 128 : 0;
1228 segptr = blk / 2;
1229
1230 mutex_lock(&priv->edid_mutex);
1231
1232 reg_write(priv, REG_DDC_ADDR, 0xa0);
1233 reg_write(priv, REG_DDC_OFFS, offset);
1234 reg_write(priv, REG_DDC_SEGM_ADDR, 0x60);
1235 reg_write(priv, REG_DDC_SEGM, segptr);
1236
1237 /* enable reading EDID: */
1238 priv->wq_edid_wait = 1;
1239 reg_write(priv, REG_EDID_CTRL, 0x1);
1240
1241 /* flag must be cleared by sw: */
1242 reg_write(priv, REG_EDID_CTRL, 0x0);
1243
1244 /* wait for block read to complete: */
1245 if (priv->hdmi->irq) {
1246 i = wait_event_timeout(priv->wq_edid,
1247 !priv->wq_edid_wait,
1248 msecs_to_jiffies(100));
1249 if (i < 0) {
1250 dev_err(&priv->hdmi->dev, "read edid wait err %d\n", i);
1251 ret = i;
1252 goto failed;
1253 }
1254 } else {
1255 for (i = 100; i > 0; i--) {
1256 msleep(1);
1257 ret = reg_read(priv, REG_INT_FLAGS_2);
1258 if (ret < 0)
1259 goto failed;
1260 if (ret & INT_FLAGS_2_EDID_BLK_RD)
1261 break;
1262 }
1263 }
1264
1265 if (i == 0) {
1266 dev_err(&priv->hdmi->dev, "read edid timeout\n");
1267 ret = -ETIMEDOUT;
1268 goto failed;
1269 }
1270
1271 ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
1272 if (ret != length) {
1273 dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
1274 blk, ret);
1275 goto failed;
1276 }
1277
1278 ret = 0;
1279
1280 failed:
1281 mutex_unlock(&priv->edid_mutex);
1282 return ret;
1283}
1284
1285static const struct drm_edid *tda998x_edid_read(struct tda998x_priv *priv,
1286 struct drm_connector *connector)
1287{
1288 const struct drm_edid *drm_edid;
1289
1290 /*
1291 * If we get killed while waiting for the HPD timeout, return
1292 * no modes found: we are not in a restartable path, so we
1293 * can't handle signals gracefully.
1294 */
1295 if (tda998x_edid_delay_wait(priv))
1296 return NULL;
1297
1298 if (priv->rev == TDA19988)
1299 reg_clear(priv, REG_TX4, TX4_PD_RAM);
1300
1301 drm_edid = drm_edid_read_custom(connector, read_edid_block, priv);
1302
1303 if (priv->rev == TDA19988)
1304 reg_set(priv, REG_TX4, TX4_PD_RAM);
1305
1306 return drm_edid;
1307}
1308
1309static int tda998x_connector_get_modes(struct drm_connector *connector)
1310{
1311 struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
1312 const struct drm_edid *drm_edid;
1313 int n;
1314
1315 drm_edid = tda998x_edid_read(priv, connector);
1316 drm_edid_connector_update(connector, drm_edid);
1317 cec_notifier_set_phys_addr(priv->cec_notify,
1318 connector->display_info.source_physical_address);
1319
1320 if (!drm_edid) {
1321 dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
1322 return 0;
1323 }
1324
1325 mutex_lock(&priv->audio_mutex);
1326 n = drm_edid_connector_add_modes(connector);
1327 priv->sink_has_audio = connector->display_info.has_audio;
1328 mutex_unlock(&priv->audio_mutex);
1329
1330 drm_edid_free(drm_edid);
1331
1332 return n;
1333}
1334
1335static struct drm_encoder *
1336tda998x_connector_best_encoder(struct drm_connector *connector)
1337{
1338 struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
1339
1340 return priv->bridge.encoder;
1341}
1342
1343static
1344const struct drm_connector_helper_funcs tda998x_connector_helper_funcs = {
1345 .get_modes = tda998x_connector_get_modes,
1346 .best_encoder = tda998x_connector_best_encoder,
1347};
1348
1349static int tda998x_connector_init(struct tda998x_priv *priv,
1350 struct drm_device *drm)
1351{
1352 struct drm_connector *connector = &priv->connector;
1353 int ret;
1354
1355 connector->interlace_allowed = 1;
1356
1357 if (priv->hdmi->irq)
1358 connector->polled = DRM_CONNECTOR_POLL_HPD;
1359 else
1360 connector->polled = DRM_CONNECTOR_POLL_CONNECT |
1361 DRM_CONNECTOR_POLL_DISCONNECT;
1362
1363 drm_connector_helper_add(connector, &tda998x_connector_helper_funcs);
1364 ret = drm_connector_init(drm, connector, &tda998x_connector_funcs,
1365 DRM_MODE_CONNECTOR_HDMIA);
1366 if (ret)
1367 return ret;
1368
1369 drm_connector_attach_encoder(&priv->connector,
1370 priv->bridge.encoder);
1371
1372 return 0;
1373}
1374
1375/* DRM bridge functions */
1376
1377static int tda998x_bridge_attach(struct drm_bridge *bridge,
1378 struct drm_encoder *encoder,
1379 enum drm_bridge_attach_flags flags)
1380{
1381 struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
1382
1383 if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
1384 return 0;
1385
1386 return tda998x_connector_init(priv, bridge->dev);
1387}
1388
1389static void tda998x_bridge_detach(struct drm_bridge *bridge)
1390{
1391 struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
1392
1393 if (priv->connector.dev)
1394 drm_connector_cleanup(&priv->connector);
1395}
1396
1397static enum drm_mode_status tda998x_bridge_mode_valid(struct drm_bridge *bridge,
1398 const struct drm_display_info *info,
1399 const struct drm_display_mode *mode)
1400{
1401 /* TDA19988 dotclock can go up to 165MHz */
1402 struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
1403
1404 if (mode->clock > ((priv->rev == TDA19988) ? 165000 : 150000))
1405 return MODE_CLOCK_HIGH;
1406 if (mode->htotal >= BIT(13))
1407 return MODE_BAD_HVALUE;
1408 if (mode->vtotal >= BIT(11))
1409 return MODE_BAD_VVALUE;
1410 return MODE_OK;
1411}
1412
1413static void tda998x_bridge_enable(struct drm_bridge *bridge)
1414{
1415 struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
1416
1417 if (!priv->is_on) {
1418 /* enable video ports, audio will be enabled later */
1419 reg_write(priv, REG_ENA_VP_0, 0xff);
1420 reg_write(priv, REG_ENA_VP_1, 0xff);
1421 reg_write(priv, REG_ENA_VP_2, 0xff);
1422 /* set muxing after enabling ports: */
1423 reg_write(priv, REG_VIP_CNTRL_0, priv->vip_cntrl_0);
1424 reg_write(priv, REG_VIP_CNTRL_1, priv->vip_cntrl_1);
1425 reg_write(priv, REG_VIP_CNTRL_2, priv->vip_cntrl_2);
1426
1427 priv->is_on = true;
1428 }
1429}
1430
1431static void tda998x_bridge_disable(struct drm_bridge *bridge)
1432{
1433 struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
1434
1435 if (priv->is_on) {
1436 /* disable video ports */
1437 reg_write(priv, REG_ENA_VP_0, 0x00);
1438 reg_write(priv, REG_ENA_VP_1, 0x00);
1439 reg_write(priv, REG_ENA_VP_2, 0x00);
1440
1441 priv->is_on = false;
1442 }
1443}
1444
1445static void tda998x_bridge_mode_set(struct drm_bridge *bridge,
1446 const struct drm_display_mode *mode,
1447 const struct drm_display_mode *adjusted_mode)
1448{
1449 struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
1450 unsigned long tmds_clock;
1451 u16 ref_pix, ref_line, n_pix, n_line;
1452 u16 hs_pix_s, hs_pix_e;
1453 u16 vs1_pix_s, vs1_pix_e, vs1_line_s, vs1_line_e;
1454 u16 vs2_pix_s, vs2_pix_e, vs2_line_s, vs2_line_e;
1455 u16 vwin1_line_s, vwin1_line_e;
1456 u16 vwin2_line_s, vwin2_line_e;
1457 u16 de_pix_s, de_pix_e;
1458 u8 reg, div, rep, sel_clk;
1459
1460 /*
1461 * Since we are "computer" like, our source invariably produces
1462 * full-range RGB. If the monitor supports full-range, then use
1463 * it, otherwise reduce to limited-range.
1464 */
1465 priv->rgb_quant_range =
1466 priv->connector.display_info.rgb_quant_range_selectable ?
1467 HDMI_QUANTIZATION_RANGE_FULL :
1468 drm_default_rgb_quant_range(adjusted_mode);
1469
1470 /*
1471 * Internally TDA998x is using ITU-R BT.656 style sync but
1472 * we get VESA style sync. TDA998x is using a reference pixel
1473 * relative to ITU to sync to the input frame and for output
1474 * sync generation. Currently, we are using reference detection
1475 * from HS/VS, i.e. REFPIX/REFLINE denote frame start sync point
1476 * which is position of rising VS with coincident rising HS.
1477 *
1478 * Now there is some issues to take care of:
1479 * - HDMI data islands require sync-before-active
1480 * - TDA998x register values must be > 0 to be enabled
1481 * - REFLINE needs an additional offset of +1
1482 * - REFPIX needs an addtional offset of +1 for UYUV and +3 for RGB
1483 *
1484 * So we add +1 to all horizontal and vertical register values,
1485 * plus an additional +3 for REFPIX as we are using RGB input only.
1486 */
1487 n_pix = mode->htotal;
1488 n_line = mode->vtotal;
1489
1490 hs_pix_e = mode->hsync_end - mode->hdisplay;
1491 hs_pix_s = mode->hsync_start - mode->hdisplay;
1492 de_pix_e = mode->htotal;
1493 de_pix_s = mode->htotal - mode->hdisplay;
1494 ref_pix = 3 + hs_pix_s;
1495
1496 /*
1497 * Attached LCD controllers may generate broken sync. Allow
1498 * those to adjust the position of the rising VS edge by adding
1499 * HSKEW to ref_pix.
1500 */
1501 if (adjusted_mode->flags & DRM_MODE_FLAG_HSKEW)
1502 ref_pix += adjusted_mode->hskew;
1503
1504 if ((mode->flags & DRM_MODE_FLAG_INTERLACE) == 0) {
1505 ref_line = 1 + mode->vsync_start - mode->vdisplay;
1506 vwin1_line_s = mode->vtotal - mode->vdisplay - 1;
1507 vwin1_line_e = vwin1_line_s + mode->vdisplay;
1508 vs1_pix_s = vs1_pix_e = hs_pix_s;
1509 vs1_line_s = mode->vsync_start - mode->vdisplay;
1510 vs1_line_e = vs1_line_s +
1511 mode->vsync_end - mode->vsync_start;
1512 vwin2_line_s = vwin2_line_e = 0;
1513 vs2_pix_s = vs2_pix_e = 0;
1514 vs2_line_s = vs2_line_e = 0;
1515 } else {
1516 ref_line = 1 + (mode->vsync_start - mode->vdisplay)/2;
1517 vwin1_line_s = (mode->vtotal - mode->vdisplay)/2;
1518 vwin1_line_e = vwin1_line_s + mode->vdisplay/2;
1519 vs1_pix_s = vs1_pix_e = hs_pix_s;
1520 vs1_line_s = (mode->vsync_start - mode->vdisplay)/2;
1521 vs1_line_e = vs1_line_s +
1522 (mode->vsync_end - mode->vsync_start)/2;
1523 vwin2_line_s = vwin1_line_s + mode->vtotal/2;
1524 vwin2_line_e = vwin2_line_s + mode->vdisplay/2;
1525 vs2_pix_s = vs2_pix_e = hs_pix_s + mode->htotal/2;
1526 vs2_line_s = vs1_line_s + mode->vtotal/2 ;
1527 vs2_line_e = vs2_line_s +
1528 (mode->vsync_end - mode->vsync_start)/2;
1529 }
1530
1531 /*
1532 * Select pixel repeat depending on the double-clock flag
1533 * (which means we have to repeat each pixel once.)
1534 */
1535 rep = mode->flags & DRM_MODE_FLAG_DBLCLK ? 1 : 0;
1536 sel_clk = SEL_CLK_ENA_SC_CLK | SEL_CLK_SEL_CLK1 |
1537 SEL_CLK_SEL_VRF_CLK(rep ? 2 : 0);
1538
1539 /* the TMDS clock is scaled up by the pixel repeat */
1540 tmds_clock = mode->clock * (1 + rep);
1541
1542 /*
1543 * The divisor is power-of-2. The TDA9983B datasheet gives
1544 * this as ranges of Msample/s, which is 10x the TMDS clock:
1545 * 0 - 800 to 1500 Msample/s
1546 * 1 - 400 to 800 Msample/s
1547 * 2 - 200 to 400 Msample/s
1548 * 3 - as 2 above
1549 */
1550 for (div = 0; div < 3; div++)
1551 if (80000 >> div <= tmds_clock)
1552 break;
1553
1554 mutex_lock(&priv->audio_mutex);
1555
1556 priv->tmds_clock = tmds_clock;
1557
1558 /* mute the audio FIFO: */
1559 reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
1560
1561 /* set HDMI HDCP mode off: */
1562 reg_write(priv, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS);
1563 reg_clear(priv, REG_TX33, TX33_HDMI);
1564 reg_write(priv, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(0));
1565
1566 /* no pre-filter or interpolator: */
1567 reg_write(priv, REG_HVF_CNTRL_0, HVF_CNTRL_0_PREFIL(0) |
1568 HVF_CNTRL_0_INTPOL(0));
1569 reg_set(priv, REG_FEAT_POWERDOWN, FEAT_POWERDOWN_PREFILT);
1570 reg_write(priv, REG_VIP_CNTRL_5, VIP_CNTRL_5_SP_CNT(0));
1571 reg_write(priv, REG_VIP_CNTRL_4, VIP_CNTRL_4_BLANKIT(0) |
1572 VIP_CNTRL_4_BLC(0));
1573
1574 reg_clear(priv, REG_PLL_SERIAL_1, PLL_SERIAL_1_SRL_MAN_IZ);
1575 reg_clear(priv, REG_PLL_SERIAL_3, PLL_SERIAL_3_SRL_CCIR |
1576 PLL_SERIAL_3_SRL_DE);
1577 reg_write(priv, REG_SERIALIZER, 0);
1578 reg_write(priv, REG_HVF_CNTRL_1, HVF_CNTRL_1_VQR(0));
1579
1580 reg_write(priv, REG_RPT_CNTRL, RPT_CNTRL_REPEAT(rep));
1581 reg_write(priv, REG_SEL_CLK, sel_clk);
1582 reg_write(priv, REG_PLL_SERIAL_2, PLL_SERIAL_2_SRL_NOSC(div) |
1583 PLL_SERIAL_2_SRL_PR(rep));
1584
1585 /* set color matrix according to output rgb quant range */
1586 if (priv->rgb_quant_range == HDMI_QUANTIZATION_RANGE_LIMITED) {
1587 static u8 tda998x_full_to_limited_range[] = {
1588 MAT_CONTRL_MAT_SC(2),
1589 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
1590 0x03, 0x6f, 0x00, 0x00, 0x00, 0x00,
1591 0x00, 0x00, 0x03, 0x6f, 0x00, 0x00,
1592 0x00, 0x00, 0x00, 0x00, 0x03, 0x6f,
1593 0x00, 0x40, 0x00, 0x40, 0x00, 0x40
1594 };
1595 reg_clear(priv, REG_FEAT_POWERDOWN, FEAT_POWERDOWN_CSC);
1596 reg_write_range(priv, REG_MAT_CONTRL,
1597 tda998x_full_to_limited_range,
1598 sizeof(tda998x_full_to_limited_range));
1599 } else {
1600 reg_write(priv, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP |
1601 MAT_CONTRL_MAT_SC(1));
1602 reg_set(priv, REG_FEAT_POWERDOWN, FEAT_POWERDOWN_CSC);
1603 }
1604
1605 /* set BIAS tmds value: */
1606 reg_write(priv, REG_ANA_GENERAL, 0x09);
1607
1608 /*
1609 * Sync on rising HSYNC/VSYNC
1610 */
1611 reg = VIP_CNTRL_3_SYNC_HS;
1612
1613 /*
1614 * TDA19988 requires high-active sync at input stage,
1615 * so invert low-active sync provided by master encoder here
1616 */
1617 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
1618 reg |= VIP_CNTRL_3_H_TGL;
1619 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
1620 reg |= VIP_CNTRL_3_V_TGL;
1621 reg_write(priv, REG_VIP_CNTRL_3, reg);
1622
1623 reg_write(priv, REG_VIDFORMAT, 0x00);
1624 reg_write16(priv, REG_REFPIX_MSB, ref_pix);
1625 reg_write16(priv, REG_REFLINE_MSB, ref_line);
1626 reg_write16(priv, REG_NPIX_MSB, n_pix);
1627 reg_write16(priv, REG_NLINE_MSB, n_line);
1628 reg_write16(priv, REG_VS_LINE_STRT_1_MSB, vs1_line_s);
1629 reg_write16(priv, REG_VS_PIX_STRT_1_MSB, vs1_pix_s);
1630 reg_write16(priv, REG_VS_LINE_END_1_MSB, vs1_line_e);
1631 reg_write16(priv, REG_VS_PIX_END_1_MSB, vs1_pix_e);
1632 reg_write16(priv, REG_VS_LINE_STRT_2_MSB, vs2_line_s);
1633 reg_write16(priv, REG_VS_PIX_STRT_2_MSB, vs2_pix_s);
1634 reg_write16(priv, REG_VS_LINE_END_2_MSB, vs2_line_e);
1635 reg_write16(priv, REG_VS_PIX_END_2_MSB, vs2_pix_e);
1636 reg_write16(priv, REG_HS_PIX_START_MSB, hs_pix_s);
1637 reg_write16(priv, REG_HS_PIX_STOP_MSB, hs_pix_e);
1638 reg_write16(priv, REG_VWIN_START_1_MSB, vwin1_line_s);
1639 reg_write16(priv, REG_VWIN_END_1_MSB, vwin1_line_e);
1640 reg_write16(priv, REG_VWIN_START_2_MSB, vwin2_line_s);
1641 reg_write16(priv, REG_VWIN_END_2_MSB, vwin2_line_e);
1642 reg_write16(priv, REG_DE_START_MSB, de_pix_s);
1643 reg_write16(priv, REG_DE_STOP_MSB, de_pix_e);
1644
1645 if (priv->rev == TDA19988) {
1646 /* let incoming pixels fill the active space (if any) */
1647 reg_write(priv, REG_ENABLE_SPACE, 0x00);
1648 }
1649
1650 /*
1651 * Always generate sync polarity relative to input sync and
1652 * revert input stage toggled sync at output stage
1653 */
1654 reg = TBG_CNTRL_1_DWIN_DIS | TBG_CNTRL_1_TGL_EN;
1655 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
1656 reg |= TBG_CNTRL_1_H_TGL;
1657 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
1658 reg |= TBG_CNTRL_1_V_TGL;
1659 reg_write(priv, REG_TBG_CNTRL_1, reg);
1660
1661 /* must be last register set: */
1662 reg_write(priv, REG_TBG_CNTRL_0, 0);
1663
1664 /* CEA-861B section 6 says that:
1665 * CEA version 1 (CEA-861) has no support for infoframes.
1666 * CEA version 2 (CEA-861A) supports version 1 AVI infoframes,
1667 * and optional basic audio.
1668 * CEA version 3 (CEA-861B) supports version 1 and 2 AVI infoframes,
1669 * and optional digital audio, with audio infoframes.
1670 *
1671 * Since we only support generation of version 2 AVI infoframes,
1672 * ignore CEA version 2 and below (iow, behave as if we're a
1673 * CEA-861 source.)
1674 */
1675 priv->supports_infoframes = priv->connector.display_info.cea_rev >= 3;
1676
1677 if (priv->supports_infoframes) {
1678 /* We need to turn HDMI HDCP stuff on to get audio through */
1679 reg &= ~TBG_CNTRL_1_DWIN_DIS;
1680 reg_write(priv, REG_TBG_CNTRL_1, reg);
1681 reg_write(priv, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(1));
1682 reg_set(priv, REG_TX33, TX33_HDMI);
1683
1684 tda998x_write_avi(priv, adjusted_mode);
1685 tda998x_write_vsi(priv, adjusted_mode);
1686
1687 if (priv->sink_has_audio)
1688 tda998x_configure_audio(priv);
1689 }
1690
1691 mutex_unlock(&priv->audio_mutex);
1692}
1693
1694static const struct drm_edid *
1695tda998x_bridge_edid_read(struct drm_bridge *bridge,
1696 struct drm_connector *connector)
1697{
1698 struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
1699 const struct drm_edid *drm_edid;
1700 const struct edid *edid;
1701
1702 drm_edid = tda998x_edid_read(priv, connector);
1703 if (!drm_edid) {
1704 dev_dbg(&priv->hdmi->dev, "failed to get edid\n");
1705 return NULL;
1706 }
1707
1708 /*
1709 * FIXME: This should use connector->display_info.has_audio from
1710 * a path that has read the EDID and called
1711 * drm_edid_connector_update().
1712 */
1713 edid = drm_edid_raw(drm_edid);
1714
1715 dev_dbg(&priv->hdmi->dev, "got edid: width[%d] x height[%d]\n",
1716 edid->width_cm, edid->height_cm);
1717
1718 priv->sink_has_audio = drm_detect_monitor_audio(edid);
1719 cec_notifier_set_phys_addr_from_edid(priv->cec_notify, edid);
1720
1721 return drm_edid;
1722}
1723
1724static enum drm_connector_status
1725tda998x_bridge_detect(struct drm_bridge *bridge,
1726 struct drm_connector *connector)
1727{
1728 struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
1729
1730 return tda998x_conn_detect(priv);
1731}
1732
1733static void tda998x_bridge_hpd_enable(struct drm_bridge *bridge)
1734{
1735 struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
1736
1737 cec_write(priv, REG_CEC_RXSHPDINTENA, CEC_RXSHPDLEV_HPD);
1738}
1739
1740static void tda998x_bridge_hpd_disable(struct drm_bridge *bridge)
1741{
1742 struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
1743
1744 cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
1745}
1746
1747static const struct drm_bridge_funcs tda998x_bridge_funcs = {
1748 .attach = tda998x_bridge_attach,
1749 .detach = tda998x_bridge_detach,
1750 .mode_valid = tda998x_bridge_mode_valid,
1751 .disable = tda998x_bridge_disable,
1752 .mode_set = tda998x_bridge_mode_set,
1753 .enable = tda998x_bridge_enable,
1754 .edid_read = tda998x_bridge_edid_read,
1755 .detect = tda998x_bridge_detect,
1756 .hpd_enable = tda998x_bridge_hpd_enable,
1757 .hpd_disable = tda998x_bridge_hpd_disable,
1758};
1759
1760/* I2C driver functions */
1761
1762static int tda998x_get_audio_ports(struct tda998x_priv *priv,
1763 struct device_node *np)
1764{
1765 const __be32 *port_data;
1766 u32 size;
1767 int i;
1768
1769 port_data = of_get_property(np, "audio-ports", &size);
1770 if (!port_data)
1771 return 0;
1772
1773 size /= sizeof(u32);
1774 if (size > 2 * ARRAY_SIZE(priv->audio_port_enable) || size % 2 != 0) {
1775 dev_err(&priv->hdmi->dev,
1776 "Bad number of elements in audio-ports dt-property\n");
1777 return -EINVAL;
1778 }
1779
1780 size /= 2;
1781
1782 for (i = 0; i < size; i++) {
1783 unsigned int route;
1784 u8 afmt = be32_to_cpup(&port_data[2*i]);
1785 u8 ena_ap = be32_to_cpup(&port_data[2*i+1]);
1786
1787 switch (afmt) {
1788 case TDA998x_I2S:
1789 route = AUDIO_ROUTE_I2S;
1790 break;
1791 case TDA998x_SPDIF:
1792 route = AUDIO_ROUTE_SPDIF;
1793 break;
1794 default:
1795 dev_err(&priv->hdmi->dev,
1796 "Bad audio format %u\n", afmt);
1797 return -EINVAL;
1798 }
1799
1800 if (!ena_ap) {
1801 dev_err(&priv->hdmi->dev, "invalid zero port config\n");
1802 continue;
1803 }
1804
1805 if (priv->audio_port_enable[route]) {
1806 dev_err(&priv->hdmi->dev,
1807 "%s format already configured\n",
1808 route == AUDIO_ROUTE_SPDIF ? "SPDIF" : "I2S");
1809 return -EINVAL;
1810 }
1811
1812 priv->audio_port_enable[route] = ena_ap;
1813 }
1814 return 0;
1815}
1816
1817static int
1818tda998x_probe(struct i2c_client *client)
1819{
1820 struct device_node *np = client->dev.of_node;
1821 struct device *dev = &client->dev;
1822 struct i2c_board_info cec_info;
1823 struct tda998x_priv *priv;
1824 int rev_lo, rev_hi, ret;
1825 u32 video;
1826
1827 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
1828 dev_warn(&client->dev, "adapter does not support I2C\n");
1829 return -EIO;
1830 }
1831
1832 priv = devm_drm_bridge_alloc(dev, struct tda998x_priv, bridge, &tda998x_bridge_funcs);
1833 if (IS_ERR(priv))
1834 return PTR_ERR(priv);
1835
1836 dev_set_drvdata(dev, priv);
1837
1838 mutex_init(&priv->mutex); /* protect the page access */
1839 mutex_init(&priv->audio_mutex); /* protect access from audio thread */
1840 mutex_init(&priv->edid_mutex);
1841 INIT_LIST_HEAD(&priv->bridge.list);
1842 init_waitqueue_head(&priv->edid_delay_waitq);
1843 timer_setup(&priv->edid_delay_timer, tda998x_edid_delay_done, 0);
1844 INIT_WORK(&priv->detect_work, tda998x_detect_work);
1845
1846 priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3);
1847 priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1);
1848 priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5);
1849
1850 /* CEC I2C address bound to TDA998x I2C addr by configuration pins */
1851 priv->cec_addr = 0x34 + (client->addr & 0x03);
1852 priv->current_page = 0xff;
1853 priv->hdmi = client;
1854
1855 /* wake up the device: */
1856 cec_write(priv, REG_CEC_ENAMODS,
1857 CEC_ENAMODS_EN_RXSENS | CEC_ENAMODS_EN_HDMI);
1858
1859 tda998x_reset(priv);
1860
1861 /* read version: */
1862 rev_lo = reg_read(priv, REG_VERSION_LSB);
1863 if (rev_lo < 0) {
1864 dev_err(dev, "failed to read version: %d\n", rev_lo);
1865 ret = rev_lo;
1866 goto cancel_work;
1867 }
1868
1869 rev_hi = reg_read(priv, REG_VERSION_MSB);
1870 if (rev_hi < 0) {
1871 dev_err(dev, "failed to read version: %d\n", rev_hi);
1872 ret = rev_hi;
1873 goto cancel_work;
1874 }
1875
1876 priv->rev = rev_lo | rev_hi << 8;
1877
1878 /* mask off feature bits: */
1879 priv->rev &= ~0x30; /* not-hdcp and not-scalar bit */
1880
1881 switch (priv->rev) {
1882 case TDA9989N2:
1883 dev_info(dev, "found TDA9989 n2");
1884 break;
1885 case TDA19989:
1886 dev_info(dev, "found TDA19989");
1887 break;
1888 case TDA19989N2:
1889 dev_info(dev, "found TDA19989 n2");
1890 break;
1891 case TDA19988:
1892 dev_info(dev, "found TDA19988");
1893 break;
1894 default:
1895 dev_err(dev, "found unsupported device: %04x\n", priv->rev);
1896 ret = -ENXIO;
1897 goto cancel_work;
1898 }
1899
1900 /* after reset, enable DDC: */
1901 reg_write(priv, REG_DDC_DISABLE, 0x00);
1902
1903 /* set clock on DDC channel: */
1904 reg_write(priv, REG_TX3, 39);
1905
1906 /* if necessary, disable multi-master: */
1907 if (priv->rev == TDA19989)
1908 reg_set(priv, REG_I2C_MASTER, I2C_MASTER_DIS_MM);
1909
1910 cec_write(priv, REG_CEC_FRO_IM_CLK_CTRL,
1911 CEC_FRO_IM_CLK_CTRL_GHOST_DIS | CEC_FRO_IM_CLK_CTRL_IMCLK_SEL);
1912
1913 /* ensure interrupts are disabled */
1914 cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
1915
1916 /* clear pending interrupts */
1917 cec_read(priv, REG_CEC_RXSHPDINT);
1918 reg_read(priv, REG_INT_FLAGS_0);
1919 reg_read(priv, REG_INT_FLAGS_1);
1920 reg_read(priv, REG_INT_FLAGS_2);
1921
1922 /* initialize the optional IRQ */
1923 if (client->irq) {
1924 unsigned long irq_flags;
1925
1926 /* init read EDID waitqueue and HDP work */
1927 init_waitqueue_head(&priv->wq_edid);
1928
1929 irq_flags =
1930 irqd_get_trigger_type(irq_get_irq_data(client->irq));
1931
1932 priv->cec_glue.irq_flags = irq_flags;
1933
1934 irq_flags |= IRQF_SHARED | IRQF_ONESHOT;
1935 ret = request_threaded_irq(client->irq, NULL,
1936 tda998x_irq_thread, irq_flags,
1937 "tda998x", priv);
1938 if (ret) {
1939 dev_err(dev, "failed to request IRQ#%u: %d\n",
1940 client->irq, ret);
1941 goto cancel_work;
1942 }
1943
1944 /* enable HPD irq */
1945 cec_write(priv, REG_CEC_RXSHPDINTENA, CEC_RXSHPDLEV_HPD);
1946 priv->bridge.ops = DRM_BRIDGE_OP_HPD;
1947 }
1948
1949 priv->cec_notify = cec_notifier_conn_register(dev, NULL, NULL);
1950 if (!priv->cec_notify) {
1951 ret = -ENOMEM;
1952 goto free_irq;
1953 }
1954
1955 priv->cec_glue.parent = dev;
1956 priv->cec_glue.data = priv;
1957 priv->cec_glue.init = tda998x_cec_hook_init;
1958 priv->cec_glue.exit = tda998x_cec_hook_exit;
1959 priv->cec_glue.open = tda998x_cec_hook_open;
1960 priv->cec_glue.release = tda998x_cec_hook_release;
1961
1962 /*
1963 * Some TDA998x are actually two I2C devices merged onto one piece
1964 * of silicon: TDA9989 and TDA19989 combine the HDMI transmitter
1965 * with a slightly modified TDA9950 CEC device. The CEC device
1966 * is at the TDA9950 address, with the address pins strapped across
1967 * to the TDA998x address pins. Hence, it always has the same
1968 * offset.
1969 */
1970 memset(&cec_info, 0, sizeof(cec_info));
1971 strscpy(cec_info.type, "tda9950", sizeof(cec_info.type));
1972 cec_info.addr = priv->cec_addr;
1973 cec_info.platform_data = &priv->cec_glue;
1974 cec_info.irq = client->irq;
1975
1976 priv->cec = i2c_new_client_device(client->adapter, &cec_info);
1977 if (IS_ERR(priv->cec)) {
1978 ret = PTR_ERR(priv->cec);
1979 goto notifier_conn_unregister;
1980 }
1981
1982 /* enable EDID read irq: */
1983 reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
1984
1985 if (np) {
1986 /* get the device tree parameters */
1987 ret = of_property_read_u32(np, "video-ports", &video);
1988 if (ret == 0) {
1989 priv->vip_cntrl_0 = video >> 16;
1990 priv->vip_cntrl_1 = video >> 8;
1991 priv->vip_cntrl_2 = video;
1992 }
1993
1994 ret = tda998x_get_audio_ports(priv, np);
1995 if (ret)
1996 goto unregister_dev;
1997
1998 if (priv->audio_port_enable[AUDIO_ROUTE_I2S] ||
1999 priv->audio_port_enable[AUDIO_ROUTE_SPDIF])
2000 tda998x_audio_codec_init(priv, &client->dev);
2001 }
2002
2003#ifdef CONFIG_OF
2004 priv->bridge.of_node = dev->of_node;
2005#endif
2006
2007 priv->bridge.ops |= DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
2008 priv->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
2009 drm_bridge_add(&priv->bridge);
2010
2011 return 0;
2012
2013unregister_dev:
2014 i2c_unregister_device(priv->cec);
2015notifier_conn_unregister:
2016 cec_notifier_conn_unregister(priv->cec_notify);
2017free_irq:
2018 if (client->irq) {
2019 cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
2020 reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
2021 free_irq(client->irq, priv);
2022 }
2023cancel_work:
2024 timer_delete_sync(&priv->edid_delay_timer);
2025 cancel_work_sync(&priv->detect_work);
2026 return ret;
2027}
2028
2029static void tda998x_remove(struct i2c_client *client)
2030{
2031 struct tda998x_priv *priv = dev_get_drvdata(&client->dev);
2032
2033 drm_bridge_remove(&priv->bridge);
2034
2035 if (priv->audio_pdev)
2036 platform_device_unregister(priv->audio_pdev);
2037
2038 i2c_unregister_device(priv->cec);
2039
2040 cec_notifier_conn_unregister(priv->cec_notify);
2041
2042 /* disable all IRQs and free the IRQ handler */
2043 if (client->irq) {
2044 cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
2045 reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
2046 free_irq(priv->hdmi->irq, priv);
2047 }
2048
2049 timer_delete_sync(&priv->edid_delay_timer);
2050 cancel_work_sync(&priv->detect_work);
2051}
2052
2053#ifdef CONFIG_OF
2054static const struct of_device_id tda998x_dt_ids[] = {
2055 { .compatible = "nxp,tda998x", },
2056 { }
2057};
2058MODULE_DEVICE_TABLE(of, tda998x_dt_ids);
2059#endif
2060
2061static const struct i2c_device_id tda998x_ids[] = {
2062 { "tda998x" },
2063 { }
2064};
2065MODULE_DEVICE_TABLE(i2c, tda998x_ids);
2066
2067static struct i2c_driver tda998x_driver = {
2068 .probe = tda998x_probe,
2069 .remove = tda998x_remove,
2070 .driver = {
2071 .name = "tda998x",
2072 .of_match_table = of_match_ptr(tda998x_dt_ids),
2073 },
2074 .id_table = tda998x_ids,
2075};
2076
2077module_i2c_driver(tda998x_driver);
2078
2079MODULE_AUTHOR("Rob Clark <robdclark@gmail.com");
2080MODULE_DESCRIPTION("NXP Semiconductors TDA998X HDMI Encoder");
2081MODULE_LICENSE("GPL");