Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
dt-bindings: phy: drop obsolete qcom,usb-8x16-phy bindings
Remove the bindings for the Qualcomm 8x16 PHY driver that was dropped
in commit 4756f35fdf14 ("usb: phy: remove phy-qcom-8x16-usb.c") in 2017.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240711122016.41806-1-rayyan.ansari@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
authored by
Rayyan Ansari
and committed by
Vinod Koul
b52a38ab
dd1051f9
-76
-76
Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt
-76
Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt
···
1
-
Qualcomm's APQ8016/MSM8916 USB transceiver controller
2
-
3
-
- compatible:
4
-
Usage: required
5
-
Value type: <string>
6
-
Definition: Should contain "qcom,usb-8x16-phy".
7
-
8
-
- reg:
9
-
Usage: required
10
-
Value type: <prop-encoded-array>
11
-
Definition: USB PHY base address and length of the register map
12
-
13
-
- clocks:
14
-
Usage: required
15
-
Value type: <prop-encoded-array>
16
-
Definition: See clock-bindings.txt section "consumers". List of
17
-
two clock specifiers for interface and core controller
18
-
clocks.
19
-
20
-
- clock-names:
21
-
Usage: required
22
-
Value type: <string>
23
-
Definition: Must contain "iface" and "core" strings.
24
-
25
-
- vddcx-supply:
26
-
Usage: required
27
-
Value type: <phandle>
28
-
Definition: phandle to the regulator VDCCX supply node.
29
-
30
-
- v1p8-supply:
31
-
Usage: required
32
-
Value type: <phandle>
33
-
Definition: phandle to the regulator 1.8V supply node.
34
-
35
-
- v3p3-supply:
36
-
Usage: required
37
-
Value type: <phandle>
38
-
Definition: phandle to the regulator 3.3V supply node.
39
-
40
-
- resets:
41
-
Usage: required
42
-
Value type: <prop-encoded-array>
43
-
Definition: See reset.txt section "consumers". PHY reset specifier.
44
-
45
-
- reset-names:
46
-
Usage: required
47
-
Value type: <string>
48
-
Definition: Must contain "phy" string.
49
-
50
-
- switch-gpio:
51
-
Usage: optional
52
-
Value type: <prop-encoded-array>
53
-
Definition: Some boards are using Dual SPDT USB Switch, witch is
54
-
controlled by GPIO to de/multiplex D+/D- USB lines
55
-
between connectors.
56
-
57
-
Example:
58
-
usb_phy: phy@78d9000 {
59
-
compatible = "qcom,usb-8x16-phy";
60
-
reg = <0x78d9000 0x400>;
61
-
62
-
vddcx-supply = <&pm8916_s1_corner>;
63
-
v1p8-supply = <&pm8916_l7>;
64
-
v3p3-supply = <&pm8916_l13>;
65
-
66
-
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
67
-
<&gcc GCC_USB_HS_SYSTEM_CLK>;
68
-
clock-names = "iface", "core";
69
-
70
-
resets = <&gcc GCC_USB2A_PHY_BCR>;
71
-
reset-names = "phy";
72
-
73
-
// D+/D- lines: 1 - Routed to HUB, 0 - Device connector
74
-
switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
75
-
};
76
-