tjh.dev / kernel
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2

1, the phy support up to 8Mbit/s databitrate for CAN FD.
refer to product data sheet:
https://www.nxp.com/docs/en/data-sheet/TJA1463.pdf
2, the standby pin of the phy is ACTIVE_LOW.
3, the phy of flexcan2 connect the standby/en pin to PCAL6408 on i2c4 bus.

Fixes: 02b7adb791e1 ("arm64: dts: imx95-19x19-evk: add adc0 flexcan[1,2] i2c[2,3] uart5 spi3 and tpm3")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

authored by

Haibo Chen and committed by
Shawn Guo e35318d8 80733306

+5 -5
+5 -5
arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
··· 80 80 flexcan1_phy: can-phy0 { 81 81 compatible = "nxp,tjr1443"; 82 82 #phy-cells = <0>; 83 - max-bitrate = <1000000>; 83 + max-bitrate = <8000000>; 84 84 enable-gpios = <&i2c6_pcal6416 6 GPIO_ACTIVE_HIGH>; 85 - standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_HIGH>; 85 + standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_LOW>; 86 86 }; 87 87 88 88 flexcan2_phy: can-phy1 { 89 89 compatible = "nxp,tjr1443"; 90 90 #phy-cells = <0>; 91 - max-bitrate = <1000000>; 92 - enable-gpios = <&i2c6_pcal6416 4 GPIO_ACTIVE_HIGH>; 93 - standby-gpios = <&i2c6_pcal6416 3 GPIO_ACTIVE_HIGH>; 91 + max-bitrate = <8000000>; 92 + enable-gpios = <&i2c4_gpio_expander_21 4 GPIO_ACTIVE_HIGH>; 93 + standby-gpios = <&i2c4_gpio_expander_21 3 GPIO_ACTIVE_LOW>; 94 94 }; 95 95 96 96 reg_vref_1v8: regulator-1p8v {