[PATCH] ppc32: add Freescale MPC885ADS board support

+44 -8

arch/ppc/8xx_io/enet.c

··· 714 714 immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */ 715 715 #endif /* PC_ENET_LBK */ 716 716 717 + #ifdef PE_ENET_TCLK 718 + /* Configure port E for TCLK and RCLK. 719 + */ 720 + cp->cp_pepar |= (PE_ENET_TCLK | PE_ENET_RCLK); 721 + cp->cp_pedir &= ~(PE_ENET_TCLK | PE_ENET_RCLK); 722 + cp->cp_peso &= ~(PE_ENET_TCLK | PE_ENET_RCLK); 723 + #else 724 + /* Configure port A for TCLK and RCLK. 725 + */ 726 + immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK); 727 + immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK); 728 + #endif 729 + 717 730 /* Configure port C pins to enable CLSN and RENA. 718 731 */ 719 732 immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA); 720 733 immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA); 721 734 immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA); 722 - 723 - /* Configure port A for TCLK and RCLK. 724 - */ 725 - immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK); 726 - immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK); 727 735 728 736 /* Configure Serial Interface clock routing. 729 737 * First, clear all SCC bits to zero, then set the ones we want. ··· 904 896 /* It is now OK to enable the Ethernet transmitter. 905 897 * Unfortunately, there are board implementation differences here. 906 898 */ 907 - #if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA)) 899 + #if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA) && !defined (PE_ENET_TENA)) 908 900 immap->im_ioport.iop_pcpar |= PC_ENET_TENA; 909 901 immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA; 910 - #elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA)) 902 + #elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && !defined (PE_ENET_TENA)) 911 903 cp->cp_pbpar |= PB_ENET_TENA; 912 904 cp->cp_pbdir |= PB_ENET_TENA; 905 + #elif ( !defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && defined (PE_ENET_TENA)) 906 + cp->cp_pepar |= PE_ENET_TENA; 907 + cp->cp_pedir &= ~PE_ENET_TENA; 908 + cp->cp_peso |= PE_ENET_TENA; 913 909 #else 914 - #error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA 910 + #error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA, PE_ENET_TENA 915 911 #endif 916 912 917 913 #if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) ··· 946 934 /* Enable the EEST PHY. 947 935 */ 948 936 *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN; 937 + #endif 938 + 939 + #ifdef CONFIG_MPC885ADS 940 + 941 + /* Deassert PHY reset and enable the PHY. 942 + */ 943 + { 944 + volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE); 945 + uint tmp; 946 + 947 + tmp = in_be32(bcsr + 1 /* BCSR1 */); 948 + tmp |= BCSR1_ETHEN; 949 + out_be32(bcsr + 1, tmp); 950 + tmp = in_be32(bcsr + 4 /* BCSR4 */); 951 + tmp |= BCSR4_ETH10_RST; 952 + out_be32(bcsr + 4, tmp); 953 + iounmap(bcsr); 954 + } 955 + 956 + /* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode 957 + * upon reset. SCC is set to half duplex by default. So this 958 + * inconsistency should be better fixed by the software. 959 + */ 949 960 #endif 950 961 951 962 dev->base_addr = (unsigned long)ep; ··· 1004 969 } 1005 970 1006 971 module_init(scc_enet_init); 972 +

+21 -1

arch/ppc/Kconfig

··· 284 284 285 285 menu "Platform options" 286 286 287 + config FADS 288 + bool 289 + 287 290 choice 288 291 prompt "8xx Machine Type" 289 292 depends on 8xx ··· 402 399 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video 403 400 controller, and two RS232 ports. 404 401 405 - config FADS 402 + config MPC8XXFADS 406 403 bool "FADS" 404 + select FADS 405 + 406 + config MPC86XADS 407 + bool "MPC86XADS" 408 + help 409 + MPC86x Application Development System by Freescale Semiconductor. 410 + The MPC86xADS is meant to serve as a platform for s/w and h/w 411 + development around the MPC86X processor families. 412 + select FADS 413 + 414 + config MPC885ADS 415 + bool "MPC885ADS" 416 + help 417 + Freescale Semiconductor MPC885 Application Development System (ADS). 418 + Also known as DUET. 419 + The MPC885ADS is meant to serve as a platform for s/w and h/w 420 + development around the MPC885 processor family. 407 421 408 422 config TQM823L 409 423 bool "TQM823L"

+633

arch/ppc/configs/mpc86x_ads_defconfig

··· 1 + # 2 + # Automatically generated make config: don't edit 3 + # Linux kernel version: 2.6.12-rc4 4 + # Tue Jun 14 13:36:35 2005 5 + # 6 + CONFIG_MMU=y 7 + CONFIG_GENERIC_HARDIRQS=y 8 + CONFIG_RWSEM_XCHGADD_ALGORITHM=y 9 + CONFIG_GENERIC_CALIBRATE_DELAY=y 10 + CONFIG_HAVE_DEC_LOCK=y 11 + CONFIG_PPC=y 12 + CONFIG_PPC32=y 13 + CONFIG_GENERIC_NVRAM=y 14 + CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y 15 + 16 + # 17 + # Code maturity level options 18 + # 19 + CONFIG_EXPERIMENTAL=y 20 + # CONFIG_CLEAN_COMPILE is not set 21 + CONFIG_BROKEN=y 22 + CONFIG_BROKEN_ON_SMP=y 23 + CONFIG_INIT_ENV_ARG_LIMIT=32 24 + 25 + # 26 + # General setup 27 + # 28 + CONFIG_LOCALVERSION="" 29 + # CONFIG_SWAP is not set 30 + CONFIG_SYSVIPC=y 31 + # CONFIG_POSIX_MQUEUE is not set 32 + # CONFIG_BSD_PROCESS_ACCT is not set 33 + CONFIG_SYSCTL=y 34 + # CONFIG_AUDIT is not set 35 + # CONFIG_HOTPLUG is not set 36 + CONFIG_KOBJECT_UEVENT=y 37 + # CONFIG_IKCONFIG is not set 38 + CONFIG_EMBEDDED=y 39 + # CONFIG_KALLSYMS is not set 40 + CONFIG_PRINTK=y 41 + CONFIG_BUG=y 42 + # CONFIG_BASE_FULL is not set 43 + CONFIG_FUTEX=y 44 + # CONFIG_EPOLL is not set 45 + # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set 46 + # CONFIG_SHMEM is not set 47 + CONFIG_CC_ALIGN_FUNCTIONS=0 48 + CONFIG_CC_ALIGN_LABELS=0 49 + CONFIG_CC_ALIGN_LOOPS=0 50 + CONFIG_CC_ALIGN_JUMPS=0 51 + CONFIG_TINY_SHMEM=y 52 + CONFIG_BASE_SMALL=1 53 + 54 + # 55 + # Loadable module support 56 + # 57 + CONFIG_MODULES=y 58 + # CONFIG_MODULE_UNLOAD is not set 59 + CONFIG_OBSOLETE_MODPARM=y 60 + # CONFIG_MODVERSIONS is not set 61 + # CONFIG_MODULE_SRCVERSION_ALL is not set 62 + # CONFIG_KMOD is not set 63 + 64 + # 65 + # Processor 66 + # 67 + # CONFIG_6xx is not set 68 + # CONFIG_40x is not set 69 + # CONFIG_44x is not set 70 + # CONFIG_POWER3 is not set 71 + # CONFIG_POWER4 is not set 72 + CONFIG_8xx=y 73 + # CONFIG_E500 is not set 74 + # CONFIG_MATH_EMULATION is not set 75 + # CONFIG_CPU_FREQ is not set 76 + CONFIG_EMBEDDEDBOOT=y 77 + # CONFIG_PM is not set 78 + CONFIG_NOT_COHERENT_CACHE=y 79 + 80 + # 81 + # Platform options 82 + # 83 + CONFIG_FADS=y 84 + # CONFIG_RPXLITE is not set 85 + # CONFIG_RPXCLASSIC is not set 86 + # CONFIG_BSEIP is not set 87 + # CONFIG_MPC8XXFADS is not set 88 + CONFIG_MPC86XADS=y 89 + # CONFIG_TQM823L is not set 90 + # CONFIG_TQM850L is not set 91 + # CONFIG_TQM855L is not set 92 + # CONFIG_TQM860L is not set 93 + # CONFIG_FPS850L is not set 94 + # CONFIG_SPD823TS is not set 95 + # CONFIG_IVMS8 is not set 96 + # CONFIG_IVML24 is not set 97 + # CONFIG_SM850 is not set 98 + # CONFIG_HERMES_PRO is not set 99 + # CONFIG_IP860 is not set 100 + # CONFIG_LWMON is not set 101 + # CONFIG_PCU_E is not set 102 + # CONFIG_CCM is not set 103 + # CONFIG_LANTEC is not set 104 + # CONFIG_MBX is not set 105 + # CONFIG_WINCEPT is not set 106 + # CONFIG_SMP is not set 107 + # CONFIG_PREEMPT is not set 108 + # CONFIG_HIGHMEM is not set 109 + CONFIG_BINFMT_ELF=y 110 + # CONFIG_BINFMT_MISC is not set 111 + # CONFIG_CMDLINE_BOOL is not set 112 + CONFIG_ISA_DMA_API=y 113 + 114 + # 115 + # Bus options 116 + # 117 + # CONFIG_PCI is not set 118 + # CONFIG_PCI_DOMAINS is not set 119 + # CONFIG_PCI_QSPAN is not set 120 + 121 + # 122 + # PCCARD (PCMCIA/CardBus) support 123 + # 124 + # CONFIG_PCCARD is not set 125 + 126 + # 127 + # Advanced setup 128 + # 129 + # CONFIG_ADVANCED_OPTIONS is not set 130 + 131 + # 132 + # Default settings for advanced configuration options are used 133 + # 134 + CONFIG_HIGHMEM_START=0xfe000000 135 + CONFIG_LOWMEM_SIZE=0x30000000 136 + CONFIG_KERNEL_START=0xc0000000 137 + CONFIG_TASK_SIZE=0x80000000 138 + CONFIG_CONSISTENT_START=0xff100000 139 + CONFIG_CONSISTENT_SIZE=0x00200000 140 + CONFIG_BOOT_LOAD=0x00400000 141 + 142 + # 143 + # Device Drivers 144 + # 145 + 146 + # 147 + # Generic Driver Options 148 + # 149 + # CONFIG_STANDALONE is not set 150 + CONFIG_PREVENT_FIRMWARE_BUILD=y 151 + # CONFIG_FW_LOADER is not set 152 + 153 + # 154 + # Memory Technology Devices (MTD) 155 + # 156 + # CONFIG_MTD is not set 157 + 158 + # 159 + # Parallel port support 160 + # 161 + # CONFIG_PARPORT is not set 162 + 163 + # 164 + # Plug and Play support 165 + # 166 + 167 + # 168 + # Block devices 169 + # 170 + # CONFIG_BLK_DEV_FD is not set 171 + # CONFIG_BLK_DEV_COW_COMMON is not set 172 + CONFIG_BLK_DEV_LOOP=y 173 + # CONFIG_BLK_DEV_CRYPTOLOOP is not set 174 + # CONFIG_BLK_DEV_NBD is not set 175 + # CONFIG_BLK_DEV_RAM is not set 176 + CONFIG_BLK_DEV_RAM_COUNT=16 177 + CONFIG_INITRAMFS_SOURCE="" 178 + # CONFIG_LBD is not set 179 + # CONFIG_CDROM_PKTCDVD is not set 180 + 181 + # 182 + # IO Schedulers 183 + # 184 + CONFIG_IOSCHED_NOOP=y 185 + CONFIG_IOSCHED_AS=y 186 + CONFIG_IOSCHED_DEADLINE=y 187 + CONFIG_IOSCHED_CFQ=y 188 + # CONFIG_ATA_OVER_ETH is not set 189 + 190 + # 191 + # ATA/ATAPI/MFM/RLL support 192 + # 193 + # CONFIG_IDE is not set 194 + 195 + # 196 + # SCSI device support 197 + # 198 + # CONFIG_SCSI is not set 199 + 200 + # 201 + # Multi-device support (RAID and LVM) 202 + # 203 + # CONFIG_MD is not set 204 + 205 + # 206 + # Fusion MPT device support 207 + # 208 + 209 + # 210 + # IEEE 1394 (FireWire) support 211 + # 212 + # CONFIG_IEEE1394 is not set 213 + 214 + # 215 + # I2O device support 216 + # 217 + 218 + # 219 + # Macintosh device drivers 220 + # 221 + 222 + # 223 + # Networking support 224 + # 225 + CONFIG_NET=y 226 + 227 + # 228 + # Networking options 229 + # 230 + CONFIG_PACKET=y 231 + # CONFIG_PACKET_MMAP is not set 232 + CONFIG_UNIX=y 233 + # CONFIG_NET_KEY is not set 234 + CONFIG_INET=y 235 + # CONFIG_IP_MULTICAST is not set 236 + # CONFIG_IP_ADVANCED_ROUTER is not set 237 + CONFIG_IP_PNP=y 238 + CONFIG_IP_PNP_DHCP=y 239 + # CONFIG_IP_PNP_BOOTP is not set 240 + # CONFIG_IP_PNP_RARP is not set 241 + # CONFIG_NET_IPIP is not set 242 + # CONFIG_NET_IPGRE is not set 243 + # CONFIG_ARPD is not set 244 + # CONFIG_SYN_COOKIES is not set 245 + # CONFIG_INET_AH is not set 246 + # CONFIG_INET_ESP is not set 247 + # CONFIG_INET_IPCOMP is not set 248 + # CONFIG_INET_TUNNEL is not set 249 + CONFIG_IP_TCPDIAG=y 250 + # CONFIG_IP_TCPDIAG_IPV6 is not set 251 + CONFIG_IPV6=m 252 + # CONFIG_IPV6_PRIVACY is not set 253 + # CONFIG_INET6_AH is not set 254 + # CONFIG_INET6_ESP is not set 255 + # CONFIG_INET6_IPCOMP is not set 256 + # CONFIG_INET6_TUNNEL is not set 257 + # CONFIG_IPV6_TUNNEL is not set 258 + # CONFIG_NETFILTER is not set 259 + 260 + # 261 + # SCTP Configuration (EXPERIMENTAL) 262 + # 263 + # CONFIG_IP_SCTP is not set 264 + # CONFIG_ATM is not set 265 + # CONFIG_BRIDGE is not set 266 + # CONFIG_VLAN_8021Q is not set 267 + # CONFIG_DECNET is not set 268 + # CONFIG_LLC2 is not set 269 + # CONFIG_IPX is not set 270 + # CONFIG_ATALK is not set 271 + # CONFIG_X25 is not set 272 + # CONFIG_LAPB is not set 273 + # CONFIG_NET_DIVERT is not set 274 + # CONFIG_ECONET is not set 275 + # CONFIG_WAN_ROUTER is not set 276 + 277 + # 278 + # QoS and/or fair queueing 279 + # 280 + # CONFIG_NET_SCHED is not set 281 + # CONFIG_NET_CLS_ROUTE is not set 282 + 283 + # 284 + # Network testing 285 + # 286 + # CONFIG_NET_PKTGEN is not set 287 + # CONFIG_NETPOLL is not set 288 + # CONFIG_NET_POLL_CONTROLLER is not set 289 + # CONFIG_HAMRADIO is not set 290 + # CONFIG_IRDA is not set 291 + # CONFIG_BT is not set 292 + CONFIG_NETDEVICES=y 293 + # CONFIG_DUMMY is not set 294 + # CONFIG_BONDING is not set 295 + # CONFIG_EQUALIZER is not set 296 + # CONFIG_TUN is not set 297 + 298 + # 299 + # Ethernet (10 or 100Mbit) 300 + # 301 + CONFIG_NET_ETHERNET=y 302 + # CONFIG_MII is not set 303 + # CONFIG_OAKNET is not set 304 + 305 + # 306 + # Ethernet (1000 Mbit) 307 + # 308 + 309 + # 310 + # Ethernet (10000 Mbit) 311 + # 312 + 313 + # 314 + # Token Ring devices 315 + # 316 + 317 + # 318 + # Wireless LAN (non-hamradio) 319 + # 320 + # CONFIG_NET_RADIO is not set 321 + 322 + # 323 + # Wan interfaces 324 + # 325 + # CONFIG_WAN is not set 326 + # CONFIG_PPP is not set 327 + # CONFIG_SLIP is not set 328 + # CONFIG_SHAPER is not set 329 + # CONFIG_NETCONSOLE is not set 330 + 331 + # 332 + # ISDN subsystem 333 + # 334 + # CONFIG_ISDN is not set 335 + 336 + # 337 + # Telephony Support 338 + # 339 + # CONFIG_PHONE is not set 340 + 341 + # 342 + # Input device support 343 + # 344 + # CONFIG_INPUT is not set 345 + 346 + # 347 + # Hardware I/O ports 348 + # 349 + # CONFIG_SERIO is not set 350 + # CONFIG_GAMEPORT is not set 351 + CONFIG_SOUND_GAMEPORT=y 352 + 353 + # 354 + # Character devices 355 + # 356 + # CONFIG_VT is not set 357 + # CONFIG_SERIAL_NONSTANDARD is not set 358 + 359 + # 360 + # Serial drivers 361 + # 362 + # CONFIG_SERIAL_8250 is not set 363 + 364 + # 365 + # Non-8250 serial port support 366 + # 367 + CONFIG_SERIAL_CORE=y 368 + CONFIG_SERIAL_CORE_CONSOLE=y 369 + CONFIG_SERIAL_CPM=y 370 + CONFIG_SERIAL_CPM_CONSOLE=y 371 + # CONFIG_SERIAL_CPM_SCC1 is not set 372 + # CONFIG_SERIAL_CPM_SCC2 is not set 373 + # CONFIG_SERIAL_CPM_SCC3 is not set 374 + # CONFIG_SERIAL_CPM_SCC4 is not set 375 + CONFIG_SERIAL_CPM_SMC1=y 376 + # CONFIG_SERIAL_CPM_SMC2 is not set 377 + CONFIG_UNIX98_PTYS=y 378 + # CONFIG_LEGACY_PTYS is not set 379 + 380 + # 381 + # IPMI 382 + # 383 + # CONFIG_IPMI_HANDLER is not set 384 + 385 + # 386 + # Watchdog Cards 387 + # 388 + # CONFIG_WATCHDOG is not set 389 + # CONFIG_NVRAM is not set 390 + # CONFIG_GEN_RTC is not set 391 + # CONFIG_DTLK is not set 392 + # CONFIG_R3964 is not set 393 + 394 + # 395 + # Ftape, the floppy tape device driver 396 + # 397 + # CONFIG_AGP is not set 398 + # CONFIG_DRM is not set 399 + # CONFIG_RAW_DRIVER is not set 400 + 401 + # 402 + # TPM devices 403 + # 404 + 405 + # 406 + # I2C support 407 + # 408 + # CONFIG_I2C is not set 409 + 410 + # 411 + # Dallas's 1-wire bus 412 + # 413 + # CONFIG_W1 is not set 414 + 415 + # 416 + # Misc devices 417 + # 418 + 419 + # 420 + # Multimedia devices 421 + # 422 + # CONFIG_VIDEO_DEV is not set 423 + 424 + # 425 + # Digital Video Broadcasting Devices 426 + # 427 + # CONFIG_DVB is not set 428 + 429 + # 430 + # Graphics support 431 + # 432 + # CONFIG_FB is not set 433 + 434 + # 435 + # Sound 436 + # 437 + # CONFIG_SOUND is not set 438 + 439 + # 440 + # USB support 441 + # 442 + # CONFIG_USB_ARCH_HAS_HCD is not set 443 + # CONFIG_USB_ARCH_HAS_OHCI is not set 444 + 445 + # 446 + # USB Gadget Support 447 + # 448 + # CONFIG_USB_GADGET is not set 449 + 450 + # 451 + # MMC/SD Card support 452 + # 453 + # CONFIG_MMC is not set 454 + 455 + # 456 + # InfiniBand support 457 + # 458 + # CONFIG_INFINIBAND is not set 459 + 460 + # 461 + # File systems 462 + # 463 + # CONFIG_EXT2_FS is not set 464 + CONFIG_EXT3_FS=y 465 + # CONFIG_EXT3_FS_XATTR is not set 466 + CONFIG_JBD=y 467 + # CONFIG_JBD_DEBUG is not set 468 + # CONFIG_REISERFS_FS is not set 469 + # CONFIG_JFS_FS is not set 470 + 471 + # 472 + # XFS support 473 + # 474 + # CONFIG_XFS_FS is not set 475 + # CONFIG_MINIX_FS is not set 476 + # CONFIG_ROMFS_FS is not set 477 + # CONFIG_QUOTA is not set 478 + # CONFIG_DNOTIFY is not set 479 + # CONFIG_AUTOFS_FS is not set 480 + # CONFIG_AUTOFS4_FS is not set 481 + 482 + # 483 + # CD-ROM/DVD Filesystems 484 + # 485 + # CONFIG_ISO9660_FS is not set 486 + # CONFIG_UDF_FS is not set 487 + 488 + # 489 + # DOS/FAT/NT Filesystems 490 + # 491 + # CONFIG_MSDOS_FS is not set 492 + # CONFIG_VFAT_FS is not set 493 + # CONFIG_NTFS_FS is not set 494 + 495 + # 496 + # Pseudo filesystems 497 + # 498 + CONFIG_PROC_FS=y 499 + CONFIG_PROC_KCORE=y 500 + CONFIG_SYSFS=y 501 + # CONFIG_DEVFS_FS is not set 502 + # CONFIG_DEVPTS_FS_XATTR is not set 503 + # CONFIG_TMPFS is not set 504 + # CONFIG_HUGETLBFS is not set 505 + # CONFIG_HUGETLB_PAGE is not set 506 + CONFIG_RAMFS=y 507 + 508 + # 509 + # Miscellaneous filesystems 510 + # 511 + # CONFIG_ADFS_FS is not set 512 + # CONFIG_AFFS_FS is not set 513 + # CONFIG_HFS_FS is not set 514 + # CONFIG_HFSPLUS_FS is not set 515 + # CONFIG_BEFS_FS is not set 516 + # CONFIG_BFS_FS is not set 517 + # CONFIG_EFS_FS is not set 518 + # CONFIG_CRAMFS is not set 519 + # CONFIG_VXFS_FS is not set 520 + # CONFIG_HPFS_FS is not set 521 + # CONFIG_QNX4FS_FS is not set 522 + # CONFIG_SYSV_FS is not set 523 + # CONFIG_UFS_FS is not set 524 + 525 + # 526 + # Network File Systems 527 + # 528 + CONFIG_NFS_FS=y 529 + CONFIG_NFS_V3=y 530 + CONFIG_NFS_V4=y 531 + # CONFIG_NFS_DIRECTIO is not set 532 + # CONFIG_NFSD is not set 533 + CONFIG_ROOT_NFS=y 534 + CONFIG_LOCKD=y 535 + CONFIG_LOCKD_V4=y 536 + CONFIG_SUNRPC=y 537 + CONFIG_SUNRPC_GSS=y 538 + CONFIG_RPCSEC_GSS_KRB5=y 539 + # CONFIG_RPCSEC_GSS_SPKM3 is not set 540 + # CONFIG_SMB_FS is not set 541 + # CONFIG_CIFS is not set 542 + # CONFIG_NCP_FS is not set 543 + # CONFIG_CODA_FS is not set 544 + # CONFIG_AFS_FS is not set 545 + 546 + # 547 + # Partition Types 548 + # 549 + # CONFIG_PARTITION_ADVANCED is not set 550 + CONFIG_MSDOS_PARTITION=y 551 + 552 + # 553 + # Native Language Support 554 + # 555 + # CONFIG_NLS is not set 556 + 557 + # 558 + # MPC8xx CPM Options 559 + # 560 + CONFIG_SCC_ENET=y 561 + CONFIG_SCC1_ENET=y 562 + # CONFIG_SCC2_ENET is not set 563 + # CONFIG_SCC3_ENET is not set 564 + # CONFIG_FEC_ENET is not set 565 + # CONFIG_ENET_BIG_BUFFERS is not set 566 + 567 + # 568 + # Generic MPC8xx Options 569 + # 570 + # CONFIG_8xx_COPYBACK is not set 571 + # CONFIG_8xx_CPU6 is not set 572 + CONFIG_NO_UCODE_PATCH=y 573 + # CONFIG_USB_SOF_UCODE_PATCH is not set 574 + # CONFIG_I2C_SPI_UCODE_PATCH is not set 575 + # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set 576 + 577 + # 578 + # Library routines 579 + # 580 + # CONFIG_CRC_CCITT is not set 581 + # CONFIG_CRC32 is not set 582 + # CONFIG_LIBCRC32C is not set 583 + 584 + # 585 + # Profiling support 586 + # 587 + # CONFIG_PROFILING is not set 588 + 589 + # 590 + # Kernel hacking 591 + # 592 + # CONFIG_PRINTK_TIME is not set 593 + # CONFIG_DEBUG_KERNEL is not set 594 + CONFIG_LOG_BUF_SHIFT=14 595 + 596 + # 597 + # Security options 598 + # 599 + # CONFIG_KEYS is not set 600 + # CONFIG_SECURITY is not set 601 + 602 + # 603 + # Cryptographic options 604 + # 605 + CONFIG_CRYPTO=y 606 + # CONFIG_CRYPTO_HMAC is not set 607 + # CONFIG_CRYPTO_NULL is not set 608 + # CONFIG_CRYPTO_MD4 is not set 609 + CONFIG_CRYPTO_MD5=y 610 + # CONFIG_CRYPTO_SHA1 is not set 611 + # CONFIG_CRYPTO_SHA256 is not set 612 + # CONFIG_CRYPTO_SHA512 is not set 613 + # CONFIG_CRYPTO_WP512 is not set 614 + # CONFIG_CRYPTO_TGR192 is not set 615 + CONFIG_CRYPTO_DES=y 616 + # CONFIG_CRYPTO_BLOWFISH is not set 617 + # CONFIG_CRYPTO_TWOFISH is not set 618 + # CONFIG_CRYPTO_SERPENT is not set 619 + # CONFIG_CRYPTO_AES is not set 620 + # CONFIG_CRYPTO_CAST5 is not set 621 + # CONFIG_CRYPTO_CAST6 is not set 622 + # CONFIG_CRYPTO_TEA is not set 623 + # CONFIG_CRYPTO_ARC4 is not set 624 + # CONFIG_CRYPTO_KHAZAD is not set 625 + # CONFIG_CRYPTO_ANUBIS is not set 626 + # CONFIG_CRYPTO_DEFLATE is not set 627 + # CONFIG_CRYPTO_MICHAEL_MIC is not set 628 + # CONFIG_CRYPTO_CRC32C is not set 629 + # CONFIG_CRYPTO_TEST is not set 630 + 631 + # 632 + # Hardware crypto devices 633 + #

+622

arch/ppc/configs/mpc885ads_defconfig

··· 1 + # 2 + # Automatically generated make config: don't edit 3 + # Linux kernel version: 2.6.12-rc6 4 + # Thu Jun 9 21:17:29 2005 5 + # 6 + CONFIG_MMU=y 7 + CONFIG_GENERIC_HARDIRQS=y 8 + CONFIG_RWSEM_XCHGADD_ALGORITHM=y 9 + CONFIG_GENERIC_CALIBRATE_DELAY=y 10 + CONFIG_HAVE_DEC_LOCK=y 11 + CONFIG_PPC=y 12 + CONFIG_PPC32=y 13 + CONFIG_GENERIC_NVRAM=y 14 + CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y 15 + 16 + # 17 + # Code maturity level options 18 + # 19 + CONFIG_EXPERIMENTAL=y 20 + # CONFIG_CLEAN_COMPILE is not set 21 + CONFIG_BROKEN=y 22 + CONFIG_BROKEN_ON_SMP=y 23 + CONFIG_INIT_ENV_ARG_LIMIT=32 24 + 25 + # 26 + # General setup 27 + # 28 + CONFIG_LOCALVERSION="" 29 + # CONFIG_SWAP is not set 30 + CONFIG_SYSVIPC=y 31 + # CONFIG_POSIX_MQUEUE is not set 32 + # CONFIG_BSD_PROCESS_ACCT is not set 33 + CONFIG_SYSCTL=y 34 + # CONFIG_AUDIT is not set 35 + CONFIG_HOTPLUG=y 36 + CONFIG_KOBJECT_UEVENT=y 37 + # CONFIG_IKCONFIG is not set 38 + CONFIG_EMBEDDED=y 39 + # CONFIG_KALLSYMS is not set 40 + CONFIG_PRINTK=y 41 + CONFIG_BUG=y 42 + CONFIG_BASE_FULL=y 43 + CONFIG_FUTEX=y 44 + # CONFIG_EPOLL is not set 45 + # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set 46 + CONFIG_SHMEM=y 47 + CONFIG_CC_ALIGN_FUNCTIONS=0 48 + CONFIG_CC_ALIGN_LABELS=0 49 + CONFIG_CC_ALIGN_LOOPS=0 50 + CONFIG_CC_ALIGN_JUMPS=0 51 + # CONFIG_TINY_SHMEM is not set 52 + CONFIG_BASE_SMALL=0 53 + 54 + # 55 + # Loadable module support 56 + # 57 + # CONFIG_MODULES is not set 58 + 59 + # 60 + # Processor 61 + # 62 + # CONFIG_6xx is not set 63 + # CONFIG_40x is not set 64 + # CONFIG_44x is not set 65 + # CONFIG_POWER3 is not set 66 + # CONFIG_POWER4 is not set 67 + CONFIG_8xx=y 68 + # CONFIG_E500 is not set 69 + # CONFIG_MATH_EMULATION is not set 70 + # CONFIG_CPU_FREQ is not set 71 + CONFIG_EMBEDDEDBOOT=y 72 + # CONFIG_PM is not set 73 + CONFIG_NOT_COHERENT_CACHE=y 74 + 75 + # 76 + # Platform options 77 + # 78 + # CONFIG_RPXLITE is not set 79 + # CONFIG_RPXCLASSIC is not set 80 + # CONFIG_BSEIP is not set 81 + # CONFIG_FADS is not set 82 + CONFIG_MPC885ADS=y 83 + # CONFIG_TQM823L is not set 84 + # CONFIG_TQM850L is not set 85 + # CONFIG_TQM855L is not set 86 + # CONFIG_TQM860L is not set 87 + # CONFIG_FPS850L is not set 88 + # CONFIG_SPD823TS is not set 89 + # CONFIG_IVMS8 is not set 90 + # CONFIG_IVML24 is not set 91 + # CONFIG_SM850 is not set 92 + # CONFIG_HERMES_PRO is not set 93 + # CONFIG_IP860 is not set 94 + # CONFIG_LWMON is not set 95 + # CONFIG_PCU_E is not set 96 + # CONFIG_CCM is not set 97 + # CONFIG_LANTEC is not set 98 + # CONFIG_MBX is not set 99 + # CONFIG_WINCEPT is not set 100 + # CONFIG_SMP is not set 101 + # CONFIG_PREEMPT is not set 102 + # CONFIG_HIGHMEM is not set 103 + CONFIG_BINFMT_ELF=y 104 + # CONFIG_BINFMT_MISC is not set 105 + # CONFIG_CMDLINE_BOOL is not set 106 + CONFIG_ISA_DMA_API=y 107 + 108 + # 109 + # Bus options 110 + # 111 + # CONFIG_PCI is not set 112 + # CONFIG_PCI_DOMAINS is not set 113 + # CONFIG_PCI_QSPAN is not set 114 + 115 + # 116 + # PCCARD (PCMCIA/CardBus) support 117 + # 118 + # CONFIG_PCCARD is not set 119 + 120 + # 121 + # Advanced setup 122 + # 123 + # CONFIG_ADVANCED_OPTIONS is not set 124 + 125 + # 126 + # Default settings for advanced configuration options are used 127 + # 128 + CONFIG_HIGHMEM_START=0xfe000000 129 + CONFIG_LOWMEM_SIZE=0x30000000 130 + CONFIG_KERNEL_START=0xc0000000 131 + CONFIG_TASK_SIZE=0x80000000 132 + CONFIG_CONSISTENT_START=0xff100000 133 + CONFIG_CONSISTENT_SIZE=0x00200000 134 + CONFIG_BOOT_LOAD=0x00400000 135 + 136 + # 137 + # Device Drivers 138 + # 139 + 140 + # 141 + # Generic Driver Options 142 + # 143 + CONFIG_STANDALONE=y 144 + CONFIG_PREVENT_FIRMWARE_BUILD=y 145 + # CONFIG_FW_LOADER is not set 146 + 147 + # 148 + # Memory Technology Devices (MTD) 149 + # 150 + # CONFIG_MTD is not set 151 + 152 + # 153 + # Parallel port support 154 + # 155 + # CONFIG_PARPORT is not set 156 + 157 + # 158 + # Plug and Play support 159 + # 160 + 161 + # 162 + # Block devices 163 + # 164 + # CONFIG_BLK_DEV_FD is not set 165 + # CONFIG_BLK_DEV_COW_COMMON is not set 166 + # CONFIG_BLK_DEV_LOOP is not set 167 + # CONFIG_BLK_DEV_NBD is not set 168 + # CONFIG_BLK_DEV_RAM is not set 169 + CONFIG_BLK_DEV_RAM_COUNT=16 170 + CONFIG_INITRAMFS_SOURCE="" 171 + # CONFIG_LBD is not set 172 + # CONFIG_CDROM_PKTCDVD is not set 173 + 174 + # 175 + # IO Schedulers 176 + # 177 + CONFIG_IOSCHED_NOOP=y 178 + # CONFIG_IOSCHED_AS is not set 179 + # CONFIG_IOSCHED_DEADLINE is not set 180 + # CONFIG_IOSCHED_CFQ is not set 181 + # CONFIG_ATA_OVER_ETH is not set 182 + 183 + # 184 + # ATA/ATAPI/MFM/RLL support 185 + # 186 + # CONFIG_IDE is not set 187 + 188 + # 189 + # SCSI device support 190 + # 191 + # CONFIG_SCSI is not set 192 + 193 + # 194 + # Multi-device support (RAID and LVM) 195 + # 196 + # CONFIG_MD is not set 197 + 198 + # 199 + # Fusion MPT device support 200 + # 201 + 202 + # 203 + # IEEE 1394 (FireWire) support 204 + # 205 + # CONFIG_IEEE1394 is not set 206 + 207 + # 208 + # I2O device support 209 + # 210 + 211 + # 212 + # Macintosh device drivers 213 + # 214 + 215 + # 216 + # Networking support 217 + # 218 + CONFIG_NET=y 219 + 220 + # 221 + # Networking options 222 + # 223 + CONFIG_PACKET=y 224 + # CONFIG_PACKET_MMAP is not set 225 + CONFIG_UNIX=y 226 + # CONFIG_NET_KEY is not set 227 + CONFIG_INET=y 228 + # CONFIG_IP_MULTICAST is not set 229 + # CONFIG_IP_ADVANCED_ROUTER is not set 230 + CONFIG_IP_PNP=y 231 + CONFIG_IP_PNP_DHCP=y 232 + CONFIG_IP_PNP_BOOTP=y 233 + # CONFIG_IP_PNP_RARP is not set 234 + # CONFIG_NET_IPIP is not set 235 + # CONFIG_NET_IPGRE is not set 236 + # CONFIG_ARPD is not set 237 + # CONFIG_SYN_COOKIES is not set 238 + # CONFIG_INET_AH is not set 239 + # CONFIG_INET_ESP is not set 240 + # CONFIG_INET_IPCOMP is not set 241 + # CONFIG_INET_TUNNEL is not set 242 + CONFIG_IP_TCPDIAG=y 243 + # CONFIG_IP_TCPDIAG_IPV6 is not set 244 + # CONFIG_IPV6 is not set 245 + # CONFIG_NETFILTER is not set 246 + 247 + # 248 + # SCTP Configuration (EXPERIMENTAL) 249 + # 250 + # CONFIG_IP_SCTP is not set 251 + # CONFIG_ATM is not set 252 + # CONFIG_BRIDGE is not set 253 + # CONFIG_VLAN_8021Q is not set 254 + # CONFIG_DECNET is not set 255 + # CONFIG_LLC2 is not set 256 + # CONFIG_IPX is not set 257 + # CONFIG_ATALK is not set 258 + # CONFIG_X25 is not set 259 + # CONFIG_LAPB is not set 260 + # CONFIG_NET_DIVERT is not set 261 + # CONFIG_ECONET is not set 262 + # CONFIG_WAN_ROUTER is not set 263 + 264 + # 265 + # QoS and/or fair queueing 266 + # 267 + # CONFIG_NET_SCHED is not set 268 + # CONFIG_NET_CLS_ROUTE is not set 269 + 270 + # 271 + # Network testing 272 + # 273 + # CONFIG_NET_PKTGEN is not set 274 + # CONFIG_NETPOLL is not set 275 + # CONFIG_NET_POLL_CONTROLLER is not set 276 + # CONFIG_HAMRADIO is not set 277 + # CONFIG_IRDA is not set 278 + # CONFIG_BT is not set 279 + CONFIG_NETDEVICES=y 280 + # CONFIG_DUMMY is not set 281 + # CONFIG_BONDING is not set 282 + # CONFIG_EQUALIZER is not set 283 + # CONFIG_TUN is not set 284 + 285 + # 286 + # Ethernet (10 or 100Mbit) 287 + # 288 + CONFIG_NET_ETHERNET=y 289 + CONFIG_MII=y 290 + # CONFIG_OAKNET is not set 291 + 292 + # 293 + # Ethernet (1000 Mbit) 294 + # 295 + 296 + # 297 + # Ethernet (10000 Mbit) 298 + # 299 + 300 + # 301 + # Token Ring devices 302 + # 303 + 304 + # 305 + # Wireless LAN (non-hamradio) 306 + # 307 + # CONFIG_NET_RADIO is not set 308 + 309 + # 310 + # Wan interfaces 311 + # 312 + # CONFIG_WAN is not set 313 + CONFIG_PPP=y 314 + # CONFIG_PPP_MULTILINK is not set 315 + # CONFIG_PPP_FILTER is not set 316 + CONFIG_PPP_ASYNC=y 317 + CONFIG_PPP_SYNC_TTY=y 318 + CONFIG_PPP_DEFLATE=y 319 + # CONFIG_PPP_BSDCOMP is not set 320 + # CONFIG_PPPOE is not set 321 + # CONFIG_SLIP is not set 322 + # CONFIG_SHAPER is not set 323 + # CONFIG_NETCONSOLE is not set 324 + 325 + # 326 + # ISDN subsystem 327 + # 328 + # CONFIG_ISDN is not set 329 + 330 + # 331 + # Telephony Support 332 + # 333 + # CONFIG_PHONE is not set 334 + 335 + # 336 + # Input device support 337 + # 338 + # CONFIG_INPUT is not set 339 + 340 + # 341 + # Hardware I/O ports 342 + # 343 + # CONFIG_SERIO is not set 344 + # CONFIG_GAMEPORT is not set 345 + 346 + # 347 + # Character devices 348 + # 349 + # CONFIG_VT is not set 350 + # CONFIG_SERIAL_NONSTANDARD is not set 351 + 352 + # 353 + # Serial drivers 354 + # 355 + # CONFIG_SERIAL_8250 is not set 356 + 357 + # 358 + # Non-8250 serial port support 359 + # 360 + CONFIG_SERIAL_CORE=y 361 + CONFIG_SERIAL_CORE_CONSOLE=y 362 + CONFIG_SERIAL_CPM=y 363 + CONFIG_SERIAL_CPM_CONSOLE=y 364 + # CONFIG_SERIAL_CPM_SCC1 is not set 365 + # CONFIG_SERIAL_CPM_SCC2 is not set 366 + # CONFIG_SERIAL_CPM_SCC3 is not set 367 + # CONFIG_SERIAL_CPM_SCC4 is not set 368 + CONFIG_SERIAL_CPM_SMC1=y 369 + CONFIG_SERIAL_CPM_SMC2=y 370 + CONFIG_UNIX98_PTYS=y 371 + # CONFIG_LEGACY_PTYS is not set 372 + 373 + # 374 + # IPMI 375 + # 376 + # CONFIG_IPMI_HANDLER is not set 377 + 378 + # 379 + # Watchdog Cards 380 + # 381 + # CONFIG_WATCHDOG is not set 382 + # CONFIG_NVRAM is not set 383 + # CONFIG_GEN_RTC is not set 384 + # CONFIG_DTLK is not set 385 + # CONFIG_R3964 is not set 386 + 387 + # 388 + # Ftape, the floppy tape device driver 389 + # 390 + # CONFIG_AGP is not set 391 + # CONFIG_DRM is not set 392 + # CONFIG_RAW_DRIVER is not set 393 + 394 + # 395 + # TPM devices 396 + # 397 + 398 + # 399 + # I2C support 400 + # 401 + # CONFIG_I2C is not set 402 + 403 + # 404 + # Dallas's 1-wire bus 405 + # 406 + # CONFIG_W1 is not set 407 + 408 + # 409 + # Misc devices 410 + # 411 + 412 + # 413 + # Multimedia devices 414 + # 415 + # CONFIG_VIDEO_DEV is not set 416 + 417 + # 418 + # Digital Video Broadcasting Devices 419 + # 420 + # CONFIG_DVB is not set 421 + 422 + # 423 + # Graphics support 424 + # 425 + # CONFIG_FB is not set 426 + 427 + # 428 + # Sound 429 + # 430 + # CONFIG_SOUND is not set 431 + 432 + # 433 + # USB support 434 + # 435 + # CONFIG_USB_ARCH_HAS_HCD is not set 436 + # CONFIG_USB_ARCH_HAS_OHCI is not set 437 + 438 + # 439 + # USB Gadget Support 440 + # 441 + # CONFIG_USB_GADGET is not set 442 + 443 + # 444 + # MMC/SD Card support 445 + # 446 + # CONFIG_MMC is not set 447 + 448 + # 449 + # InfiniBand support 450 + # 451 + # CONFIG_INFINIBAND is not set 452 + 453 + # 454 + # File systems 455 + # 456 + CONFIG_EXT2_FS=y 457 + CONFIG_EXT2_FS_XATTR=y 458 + # CONFIG_EXT2_FS_POSIX_ACL is not set 459 + # CONFIG_EXT2_FS_SECURITY is not set 460 + CONFIG_EXT3_FS=y 461 + CONFIG_EXT3_FS_XATTR=y 462 + # CONFIG_EXT3_FS_POSIX_ACL is not set 463 + # CONFIG_EXT3_FS_SECURITY is not set 464 + CONFIG_JBD=y 465 + # CONFIG_JBD_DEBUG is not set 466 + CONFIG_FS_MBCACHE=y 467 + # CONFIG_REISERFS_FS is not set 468 + # CONFIG_JFS_FS is not set 469 + 470 + # 471 + # XFS support 472 + # 473 + # CONFIG_XFS_FS is not set 474 + # CONFIG_MINIX_FS is not set 475 + # CONFIG_ROMFS_FS is not set 476 + # CONFIG_QUOTA is not set 477 + # CONFIG_DNOTIFY is not set 478 + # CONFIG_AUTOFS_FS is not set 479 + # CONFIG_AUTOFS4_FS is not set 480 + 481 + # 482 + # CD-ROM/DVD Filesystems 483 + # 484 + # CONFIG_ISO9660_FS is not set 485 + # CONFIG_UDF_FS is not set 486 + 487 + # 488 + # DOS/FAT/NT Filesystems 489 + # 490 + # CONFIG_MSDOS_FS is not set 491 + # CONFIG_VFAT_FS is not set 492 + # CONFIG_NTFS_FS is not set 493 + 494 + # 495 + # Pseudo filesystems 496 + # 497 + CONFIG_PROC_FS=y 498 + # CONFIG_PROC_KCORE is not set 499 + CONFIG_SYSFS=y 500 + # CONFIG_DEVFS_FS is not set 501 + # CONFIG_DEVPTS_FS_XATTR is not set 502 + # CONFIG_TMPFS is not set 503 + # CONFIG_HUGETLBFS is not set 504 + # CONFIG_HUGETLB_PAGE is not set 505 + CONFIG_RAMFS=y 506 + 507 + # 508 + # Miscellaneous filesystems 509 + # 510 + # CONFIG_ADFS_FS is not set 511 + # CONFIG_AFFS_FS is not set 512 + # CONFIG_HFS_FS is not set 513 + # CONFIG_HFSPLUS_FS is not set 514 + # CONFIG_BEFS_FS is not set 515 + # CONFIG_BFS_FS is not set 516 + # CONFIG_EFS_FS is not set 517 + # CONFIG_CRAMFS is not set 518 + # CONFIG_VXFS_FS is not set 519 + # CONFIG_HPFS_FS is not set 520 + # CONFIG_QNX4FS_FS is not set 521 + # CONFIG_SYSV_FS is not set 522 + # CONFIG_UFS_FS is not set 523 + 524 + # 525 + # Network File Systems 526 + # 527 + CONFIG_NFS_FS=y 528 + # CONFIG_NFS_V3 is not set 529 + # CONFIG_NFS_V4 is not set 530 + # CONFIG_NFS_DIRECTIO is not set 531 + # CONFIG_NFSD is not set 532 + CONFIG_ROOT_NFS=y 533 + CONFIG_LOCKD=y 534 + CONFIG_SUNRPC=y 535 + # CONFIG_RPCSEC_GSS_KRB5 is not set 536 + # CONFIG_RPCSEC_GSS_SPKM3 is not set 537 + # CONFIG_SMB_FS is not set 538 + # CONFIG_CIFS is not set 539 + # CONFIG_NCP_FS is not set 540 + # CONFIG_CODA_FS is not set 541 + # CONFIG_AFS_FS is not set 542 + 543 + # 544 + # Partition Types 545 + # 546 + CONFIG_PARTITION_ADVANCED=y 547 + # CONFIG_ACORN_PARTITION is not set 548 + # CONFIG_OSF_PARTITION is not set 549 + # CONFIG_AMIGA_PARTITION is not set 550 + # CONFIG_ATARI_PARTITION is not set 551 + # CONFIG_MAC_PARTITION is not set 552 + CONFIG_MSDOS_PARTITION=y 553 + # CONFIG_BSD_DISKLABEL is not set 554 + # CONFIG_MINIX_SUBPARTITION is not set 555 + # CONFIG_SOLARIS_X86_PARTITION is not set 556 + # CONFIG_UNIXWARE_DISKLABEL is not set 557 + # CONFIG_LDM_PARTITION is not set 558 + # CONFIG_SGI_PARTITION is not set 559 + # CONFIG_ULTRIX_PARTITION is not set 560 + # CONFIG_SUN_PARTITION is not set 561 + # CONFIG_EFI_PARTITION is not set 562 + 563 + # 564 + # Native Language Support 565 + # 566 + # CONFIG_NLS is not set 567 + 568 + # 569 + # MPC8xx CPM Options 570 + # 571 + CONFIG_SCC_ENET=y 572 + # CONFIG_SCC1_ENET is not set 573 + # CONFIG_SCC2_ENET is not set 574 + CONFIG_SCC3_ENET=y 575 + # CONFIG_FEC_ENET is not set 576 + # CONFIG_ENET_BIG_BUFFERS is not set 577 + 578 + # 579 + # Generic MPC8xx Options 580 + # 581 + CONFIG_8xx_COPYBACK=y 582 + CONFIG_8xx_CPU6=y 583 + CONFIG_NO_UCODE_PATCH=y 584 + # CONFIG_USB_SOF_UCODE_PATCH is not set 585 + # CONFIG_I2C_SPI_UCODE_PATCH is not set 586 + # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set 587 + 588 + # 589 + # Library routines 590 + # 591 + CONFIG_CRC_CCITT=y 592 + # CONFIG_CRC32 is not set 593 + # CONFIG_LIBCRC32C is not set 594 + CONFIG_ZLIB_INFLATE=y 595 + CONFIG_ZLIB_DEFLATE=y 596 + 597 + # 598 + # Profiling support 599 + # 600 + # CONFIG_PROFILING is not set 601 + 602 + # 603 + # Kernel hacking 604 + # 605 + # CONFIG_PRINTK_TIME is not set 606 + # CONFIG_DEBUG_KERNEL is not set 607 + CONFIG_LOG_BUF_SHIFT=14 608 + 609 + # 610 + # Security options 611 + # 612 + # CONFIG_KEYS is not set 613 + # CONFIG_SECURITY is not set 614 + 615 + # 616 + # Cryptographic options 617 + # 618 + # CONFIG_CRYPTO is not set 619 + 620 + # 621 + # Hardware crypto devices 622 + #

+103 -6

arch/ppc/platforms/fads.h

··· 3 3 * the Motorola 860T FADS board. Copied from the MBX stuff. 4 4 * 5 5 * Copyright (c) 1998 Dan Malek (dmalek@jlc.net) 6 + * 7 + * Added MPC86XADS support. 8 + * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS 9 + * for SW point of view". This is 99% correct. 10 + * 11 + * Author: MontaVista Software, Inc. 12 + * source@mvista.com 13 + * 2005 (c) MontaVista Software, Inc. This file is licensed under the 14 + * terms of the GNU General Public License version 2. This program is licensed 15 + * "as is" without any warranty of any kind, whether express or implied. 6 16 */ 17 + 7 18 #ifdef __KERNEL__ 8 19 #ifndef __ASM_FADS_H__ 9 20 #define __ASM_FADS_H__ ··· 23 12 24 13 #include <asm/ppcboot.h> 25 14 15 + #if defined(CONFIG_MPC86XADS) 16 + 17 + /* U-Boot maps BCSR to 0xff080000 */ 18 + #define BCSR_ADDR ((uint)0xff080000) 19 + 20 + /* MPC86XADS has one more CPLD and an additional BCSR. 21 + */ 22 + #define CFG_PHYDEV_ADDR ((uint)0xff0a0000) 23 + #define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) 24 + 25 + #define BCSR5_T1_RST 0x10 26 + #define BCSR5_ATM155_RST 0x08 27 + #define BCSR5_ATM25_RST 0x04 28 + #define BCSR5_MII1_EN 0x02 29 + #define BCSR5_MII1_RST 0x01 30 + 31 + /* There is no PHY link change interrupt */ 32 + #define PHY_INTERRUPT (-1) 33 + 34 + #else /* FADS */ 35 + 26 36 /* Memory map is configured by the PROM startup. 27 37 * I tried to follow the FADS manual, although the startup PROM 28 38 * dictates this and we simply have to move some of the physical 29 39 * addresses for Linux. 30 40 */ 31 41 #define BCSR_ADDR ((uint)0xff010000) 42 + 43 + /* PHY link change interrupt */ 44 + #define PHY_INTERRUPT SIU_IRQ2 45 + 46 + #endif /* CONFIG_MPC86XADS */ 47 + 32 48 #define BCSR_SIZE ((uint)(64 * 1024)) 33 - #define BCSR0 ((uint)0xff010000) 34 - #define BCSR1 ((uint)0xff010004) 35 - #define BCSR2 ((uint)0xff010008) 36 - #define BCSR3 ((uint)0xff01000c) 37 - #define BCSR4 ((uint)0xff010010) 49 + #define BCSR0 ((uint)(BCSR_ADDR + 0x00)) 50 + #define BCSR1 ((uint)(BCSR_ADDR + 0x04)) 51 + #define BCSR2 ((uint)(BCSR_ADDR + 0x08)) 52 + #define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) 53 + #define BCSR4 ((uint)(BCSR_ADDR + 0x10)) 38 54 39 55 #define IMAP_ADDR ((uint)0xff000000) 40 56 #define IMAP_SIZE ((uint)(64 * 1024)) ··· 72 34 /* Bits of interest in the BCSRs. 73 35 */ 74 36 #define BCSR1_ETHEN ((uint)0x20000000) 37 + #define BCSR1_IRDAEN ((uint)0x10000000) 75 38 #define BCSR1_RS232EN_1 ((uint)0x01000000) 39 + #define BCSR1_PCCEN ((uint)0x00800000) 40 + #define BCSR1_PCCVCC0 ((uint)0x00400000) 41 + #define BCSR1_PCCVPP0 ((uint)0x00200000) 42 + #define BCSR1_PCCVPP1 ((uint)0x00100000) 43 + #define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) 76 44 #define BCSR1_RS232EN_2 ((uint)0x00040000) 45 + #define BCSR1_PCCVCC1 ((uint)0x00010000) 46 + #define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) 47 + 77 48 #define BCSR4_ETHLOOP ((uint)0x80000000) /* EEST Loopback */ 78 49 #define BCSR4_EEFDX ((uint)0x40000000) /* EEST FDX enable */ 79 50 #define BCSR4_FETH_EN ((uint)0x08000000) /* PHY enable */ ··· 91 44 #define BCSR4_FETHFDE ((uint)0x02000000) /* PHY FDX advertise */ 92 45 #define BCSR4_FETHRST ((uint)0x00200000) /* PHY Reset */ 93 46 47 + /* IO_BASE definition for pcmcia. 48 + */ 49 + #define _IO_BASE 0x80000000 50 + #define _IO_BASE_SIZE 0x1000 51 + 52 + #ifdef CONFIG_IDE 53 + #define MAX_HWIFS 1 54 + #endif 55 + 94 56 /* Interrupt level assignments. 95 57 */ 96 58 #define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ 97 - #define PHY_INTERRUPT SIU_IRQ2 /* PHY link change interrupt */ 98 59 99 60 /* We don't use the 8259. 100 61 */ 101 62 #define NR_8259_INTS 0 63 + 64 + /* CPM Ethernet through SCC1 or SCC2 */ 65 + 66 + #ifdef CONFIG_SCC1_ENET /* Probably 860 variant */ 67 + /* Bits in parallel I/O port registers that have to be set/cleared 68 + * to configure the pins for SCC1 use. 69 + * TCLK - CLK1, RCLK - CLK2. 70 + */ 71 + #define PA_ENET_RXD ((ushort)0x0001) 72 + #define PA_ENET_TXD ((ushort)0x0002) 73 + #define PA_ENET_TCLK ((ushort)0x0100) 74 + #define PA_ENET_RCLK ((ushort)0x0200) 75 + #define PB_ENET_TENA ((uint)0x00001000) 76 + #define PC_ENET_CLSN ((ushort)0x0010) 77 + #define PC_ENET_RENA ((ushort)0x0020) 78 + 79 + /* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to 80 + * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. 81 + */ 82 + #define SICR_ENET_MASK ((uint)0x000000ff) 83 + #define SICR_ENET_CLKRT ((uint)0x0000002c) 84 + #endif /* CONFIG_SCC1_ENET */ 85 + 86 + #ifdef CONFIG_SCC2_ENET /* Probably 823/850 variant */ 87 + /* Bits in parallel I/O port registers that have to be set/cleared 88 + * to configure the pins for SCC1 use. 89 + * TCLK - CLK1, RCLK - CLK2. 90 + */ 91 + #define PA_ENET_RXD ((ushort)0x0004) 92 + #define PA_ENET_TXD ((ushort)0x0008) 93 + #define PA_ENET_TCLK ((ushort)0x0400) 94 + #define PA_ENET_RCLK ((ushort)0x0200) 95 + #define PB_ENET_TENA ((uint)0x00002000) 96 + #define PC_ENET_CLSN ((ushort)0x0040) 97 + #define PC_ENET_RENA ((ushort)0x0080) 98 + 99 + /* Control bits in the SICR to route TCLK and RCLK to 100 + * SCC2. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. 101 + */ 102 + #define SICR_ENET_MASK ((uint)0x0000ff00) 103 + #define SICR_ENET_CLKRT ((uint)0x00002e00) 104 + #endif /* CONFIG_SCC2_ENET */ 102 105 103 106 #endif /* __ASM_FADS_H__ */ 104 107 #endif /* __KERNEL__ */

+92

arch/ppc/platforms/mpc885ads.h

··· 1 + /* 2 + * A collection of structures, addresses, and values associated with 3 + * the Freescale MPC885ADS board. 4 + * Copied from the FADS stuff. 5 + * 6 + * Author: MontaVista Software, Inc. 7 + * source@mvista.com 8 + * 9 + * 2005 (c) MontaVista Software, Inc. This file is licensed under the 10 + * terms of the GNU General Public License version 2. This program is licensed 11 + * "as is" without any warranty of any kind, whether express or implied. 12 + */ 13 + 14 + #ifdef __KERNEL__ 15 + #ifndef __ASM_MPC885ADS_H__ 16 + #define __ASM_MPC885ADS_H__ 17 + 18 + #include <linux/config.h> 19 + 20 + #include <asm/ppcboot.h> 21 + 22 + /* U-Boot maps BCSR to 0xff080000 */ 23 + #define BCSR_ADDR ((uint)0xff080000) 24 + #define BCSR_SIZE ((uint)32) 25 + #define BCSR0 ((uint)(BCSR_ADDR + 0x00)) 26 + #define BCSR1 ((uint)(BCSR_ADDR + 0x04)) 27 + #define BCSR2 ((uint)(BCSR_ADDR + 0x08)) 28 + #define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) 29 + #define BCSR4 ((uint)(BCSR_ADDR + 0x10)) 30 + 31 + #define CFG_PHYDEV_ADDR ((uint)0xff0a0000) 32 + #define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) 33 + 34 + #define IMAP_ADDR ((uint)0xff000000) 35 + #define IMAP_SIZE ((uint)(64 * 1024)) 36 + 37 + #define PCMCIA_MEM_ADDR ((uint)0xff020000) 38 + #define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) 39 + 40 + /* Bits of interest in the BCSRs. 41 + */ 42 + #define BCSR1_ETHEN ((uint)0x20000000) 43 + #define BCSR1_IRDAEN ((uint)0x10000000) 44 + #define BCSR1_RS232EN_1 ((uint)0x01000000) 45 + #define BCSR1_PCCEN ((uint)0x00800000) 46 + #define BCSR1_PCCVCC0 ((uint)0x00400000) 47 + #define BCSR1_PCCVPP0 ((uint)0x00200000) 48 + #define BCSR1_PCCVPP1 ((uint)0x00100000) 49 + #define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) 50 + #define BCSR1_RS232EN_2 ((uint)0x00040000) 51 + #define BCSR1_PCCVCC1 ((uint)0x00010000) 52 + #define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) 53 + 54 + #define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ 55 + #define BCSR4_USB_LO_SPD ((uint)0x04000000) 56 + #define BCSR4_USB_VCC ((uint)0x02000000) 57 + #define BCSR4_USB_FULL_SPD ((uint)0x00040000) 58 + #define BCSR4_USB_EN ((uint)0x00020000) 59 + 60 + #define BCSR5_MII2_EN 0x40 61 + #define BCSR5_MII2_RST 0x20 62 + #define BCSR5_T1_RST 0x10 63 + #define BCSR5_ATM155_RST 0x08 64 + #define BCSR5_ATM25_RST 0x04 65 + #define BCSR5_MII1_EN 0x02 66 + #define BCSR5_MII1_RST 0x01 67 + 68 + /* Interrupt level assignments */ 69 + #define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */ 70 + #define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */ 71 + #define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */ 72 + #define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */ 73 + 74 + /* We don't use the 8259 */ 75 + #define NR_8259_INTS 0 76 + 77 + /* CPM Ethernet through SCC3 */ 78 + #define PA_ENET_RXD ((ushort)0x0040) 79 + #define PA_ENET_TXD ((ushort)0x0080) 80 + #define PE_ENET_TCLK ((uint)0x00004000) 81 + #define PE_ENET_RCLK ((uint)0x00008000) 82 + #define PE_ENET_TENA ((uint)0x00000010) 83 + #define PC_ENET_CLSN ((ushort)0x0400) 84 + #define PC_ENET_RENA ((ushort)0x0800) 85 + 86 + /* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to 87 + * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */ 88 + #define SICR_ENET_MASK ((uint)0x00ff0000) 89 + #define SICR_ENET_CLKRT ((uint)0x002c0000) 90 + 91 + #endif /* __ASM_MPC885ADS_H__ */ 92 + #endif /* __KERNEL__ */

+31 -1

drivers/serial/cpm_uart/cpm_uart_cpm1.c

··· 94 94 ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; 95 95 } 96 96 97 + #ifdef CONFIG_MPC885ADS 98 + /* Enable SMC1 transceivers */ 99 + { 100 + volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4); 101 + uint tmp; 102 + 103 + tmp = in_be32(bcsr1); 104 + tmp &= ~BCSR1_RS232EN_1; 105 + out_be32(bcsr1, tmp); 106 + iounmap(bcsr1); 107 + } 108 + #endif 109 + 97 110 pinfo->brg = 1; 98 111 } 99 112 100 113 void smc2_lineif(struct uart_cpm_port *pinfo) 101 114 { 102 - /* XXX SMC2: insert port configuration here */ 115 + #ifdef CONFIG_MPC885ADS 116 + volatile cpm8xx_t *cp = cpmp; 117 + volatile uint __iomem *bcsr1; 118 + uint tmp; 119 + 120 + cp->cp_pepar |= 0x00000c00; 121 + cp->cp_pedir &= ~0x00000c00; 122 + cp->cp_peso &= ~0x00000400; 123 + cp->cp_peso |= 0x00000800; 124 + 125 + /* Enable SMC2 transceivers */ 126 + bcsr1 = ioremap(BCSR1, 4); 127 + tmp = in_be32(bcsr1); 128 + tmp &= ~BCSR1_RS232EN_2; 129 + out_be32(bcsr1, tmp); 130 + iounmap(bcsr1); 131 + #endif 132 + 103 133 pinfo->brg = 2; 104 134 } 105 135

+4

include/asm-ppc/mpc8xx.h

··· 68 68 #include <platforms/lantec.h> 69 69 #endif 70 70 71 + #if defined(CONFIG_MPC885ADS) 72 + #include <platforms/mpc885ads.h> 73 + #endif 74 + 71 75 /* Currently, all 8xx boards that support a processor to PCI/ISA bridge 72 76 * use the same memory map. 73 77 */

Configure Feed

Configure Feed