Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
dt-bindings: iio: adc: add AD7191
AD7191 is a pin-programmable, ultra-low noise 24-bit sigma-delta ADC
designed for precision bridge sensor measurements. It features two
differential analog input channels, selectable output rates,
programmable gain, internal temperature sensor and simultaneous
50Hz/60Hz rejection.
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Lechner<dlechner@baylibre.com>
Link: https://patch.msgid.link/20250228141327.262488-2-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
authored by
Alisa-Dariana Roman
and committed by
Jonathan Cameron
f52b5daf
21ce1ce0
+156
+149
Documentation/devicetree/bindings/iio/adc/adi,ad7191.yaml
+149
Documentation/devicetree/bindings/iio/adc/adi,ad7191.yaml
···
1
+
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2
+
# Copyright 2025 Analog Devices Inc.
3
+
%YAML 1.2
4
+
---
5
+
$id: http://devicetree.org/schemas/iio/adc/adi,ad7191.yaml#
6
+
$schema: http://devicetree.org/meta-schemas/core.yaml#
7
+
8
+
title: Analog Devices AD7191 ADC
9
+
10
+
maintainers:
11
+
- Alisa-Dariana Roman <alisa.roman@analog.com>
12
+
13
+
description: |
14
+
Bindings for the Analog Devices AD7191 ADC device. Datasheet can be
15
+
found here:
16
+
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7191.pdf
17
+
The device's PDOWN pin must be connected to the SPI controller's chip select
18
+
pin.
19
+
20
+
properties:
21
+
compatible:
22
+
enum:
23
+
- adi,ad7191
24
+
25
+
reg:
26
+
maxItems: 1
27
+
28
+
spi-cpol: true
29
+
30
+
spi-cpha: true
31
+
32
+
clocks:
33
+
maxItems: 1
34
+
description:
35
+
Must be present when CLKSEL pin is tied HIGH to select external clock
36
+
source (either a crystal between MCLK1 and MCLK2 pins, or a
37
+
CMOS-compatible clock driving MCLK2 pin). Must be absent when CLKSEL pin
38
+
is tied LOW to use the internal 4.92MHz clock.
39
+
40
+
interrupts:
41
+
maxItems: 1
42
+
43
+
avdd-supply:
44
+
description: AVdd voltage supply
45
+
46
+
dvdd-supply:
47
+
description: DVdd voltage supply
48
+
49
+
vref-supply:
50
+
description: Vref voltage supply
51
+
52
+
odr-gpios:
53
+
description:
54
+
ODR1 and ODR2 pins for output data rate selection. Should be defined if
55
+
adi,odr-value is absent.
56
+
minItems: 2
57
+
maxItems: 2
58
+
59
+
adi,odr-value:
60
+
$ref: /schemas/types.yaml#/definitions/uint32
61
+
description: |
62
+
Should be present if ODR pins are pin-strapped. Possible values:
63
+
120 Hz (ODR1=0, ODR2=0)
64
+
60 Hz (ODR1=0, ODR2=1)
65
+
50 Hz (ODR1=1, ODR2=0)
66
+
10 Hz (ODR1=1, ODR2=1)
67
+
If defined, odr-gpios must be absent.
68
+
enum: [120, 60, 50, 10]
69
+
70
+
pga-gpios:
71
+
description:
72
+
PGA1 and PGA2 pins for gain selection. Should be defined if adi,pga-value
73
+
is absent.
74
+
minItems: 2
75
+
maxItems: 2
76
+
77
+
adi,pga-value:
78
+
$ref: /schemas/types.yaml#/definitions/uint32
79
+
description: |
80
+
Should be present if PGA pins are pin-strapped. Possible values:
81
+
Gain 1 (PGA1=0, PGA2=0)
82
+
Gain 8 (PGA1=0, PGA2=1)
83
+
Gain 64 (PGA1=1, PGA2=0)
84
+
Gain 128 (PGA1=1, PGA2=1)
85
+
If defined, pga-gpios must be absent.
86
+
enum: [1, 8, 64, 128]
87
+
88
+
temp-gpios:
89
+
description: TEMP pin for temperature sensor enable.
90
+
maxItems: 1
91
+
92
+
chan-gpios:
93
+
description: CHAN pin for input channel selection.
94
+
maxItems: 1
95
+
96
+
required:
97
+
- compatible
98
+
- reg
99
+
- interrupts
100
+
- avdd-supply
101
+
- dvdd-supply
102
+
- vref-supply
103
+
- spi-cpol
104
+
- spi-cpha
105
+
- temp-gpios
106
+
- chan-gpios
107
+
108
+
allOf:
109
+
- $ref: /schemas/spi/spi-peripheral-props.yaml#
110
+
- oneOf:
111
+
- required:
112
+
- adi,odr-value
113
+
- required:
114
+
- odr-gpios
115
+
- oneOf:
116
+
- required:
117
+
- adi,pga-value
118
+
- required:
119
+
- pga-gpios
120
+
121
+
unevaluatedProperties: false
122
+
123
+
examples:
124
+
- |
125
+
#include <dt-bindings/gpio/gpio.h>
126
+
#include <dt-bindings/interrupt-controller/irq.h>
127
+
128
+
spi {
129
+
#address-cells = <1>;
130
+
#size-cells = <0>;
131
+
132
+
adc@0 {
133
+
compatible = "adi,ad7191";
134
+
reg = <0>;
135
+
spi-max-frequency = <1000000>;
136
+
spi-cpol;
137
+
spi-cpha;
138
+
clocks = <&ad7191_mclk>;
139
+
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
140
+
interrupt-parent = <&gpio>;
141
+
avdd-supply = <&avdd>;
142
+
dvdd-supply = <&dvdd>;
143
+
vref-supply = <&vref>;
144
+
adi,pga-value = <1>;
145
+
odr-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>, <&gpio 24 GPIO_ACTIVE_HIGH>;
146
+
temp-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
147
+
chan-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
148
+
};
149
+
};
+7
MAINTAINERS
+7
MAINTAINERS
···
1346
1346
F: Documentation/devicetree/bindings/iio/adc/adi,ad7091r*
1347
1347
F: drivers/iio/adc/ad7091r*
1348
1348
1349
+
ANALOG DEVICES INC AD7191 DRIVER
1350
+
M: Alisa-Dariana Roman <alisa.roman@analog.com>
1351
+
L: linux-iio@vger.kernel.org
1352
+
S: Supported
1353
+
W: https://ez.analog.com/linux-software-drivers
1354
+
F: Documentation/devicetree/bindings/iio/adc/adi,ad7191.yaml
1355
+
1349
1356
ANALOG DEVICES INC AD7192 DRIVER
1350
1357
M: Alisa-Dariana Roman <alisa.roman@analog.com>
1351
1358
L: linux-iio@vger.kernel.org