Linux kernel ============ The Linux kernel is the core of any Linux operating system. It manages hardware, system resources, and provides the fundamental services for all other software. Quick Start ----------- * Report a bug: See Documentation/admin-guide/reporting-issues.rst * Get the latest kernel: https://kernel.org * Build the kernel: See Documentation/admin-guide/quickly-build-trimmed-linux.rst * Join the community: https://lore.kernel.org/ Essential Documentation ----------------------- All users should be familiar with: * Building requirements: Documentation/process/changes.rst * Code of Conduct: Documentation/process/code-of-conduct.rst * License: See COPYING Documentation can be built with make htmldocs or viewed online at: https://www.kernel.org/doc/html/latest/ Who Are You? ============ Find your role below: * New Kernel Developer - Getting started with kernel development * Academic Researcher - Studying kernel internals and architecture * Security Expert - Hardening and vulnerability analysis * Backport/Maintenance Engineer - Maintaining stable kernels * System Administrator - Configuring and troubleshooting * Maintainer - Leading subsystems and reviewing patches * Hardware Vendor - Writing drivers for new hardware * Distribution Maintainer - Packaging kernels for distros * AI Coding Assistant - LLMs and AI-powered development tools For Specific Users ================== New Kernel Developer -------------------- Welcome! Start your kernel development journey here: * Getting Started: Documentation/process/development-process.rst * Your First Patch: Documentation/process/submitting-patches.rst * Coding Style: Documentation/process/coding-style.rst * Build System: Documentation/kbuild/index.rst * Development Tools: Documentation/dev-tools/index.rst * Kernel Hacking Guide: Documentation/kernel-hacking/hacking.rst * Core APIs: Documentation/core-api/index.rst Academic Researcher ------------------- Explore the kernel's architecture and internals: * Researcher Guidelines: Documentation/process/researcher-guidelines.rst * Memory Management: Documentation/mm/index.rst * Scheduler: Documentation/scheduler/index.rst * Networking Stack: Documentation/networking/index.rst * Filesystems: Documentation/filesystems/index.rst * RCU (Read-Copy Update): Documentation/RCU/index.rst * Locking Primitives: Documentation/locking/index.rst * Power Management: Documentation/power/index.rst Security Expert --------------- Security documentation and hardening guides: * Security Documentation: Documentation/security/index.rst * LSM Development: Documentation/security/lsm-development.rst * Self Protection: Documentation/security/self-protection.rst * Reporting Vulnerabilities: Documentation/process/security-bugs.rst * CVE Procedures: Documentation/process/cve.rst * Embargoed Hardware Issues: Documentation/process/embargoed-hardware-issues.rst * Security Features: Documentation/userspace-api/seccomp_filter.rst Backport/Maintenance Engineer ----------------------------- Maintain and stabilize kernel versions: * Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst * Backporting Guide: Documentation/process/backporting.rst * Applying Patches: Documentation/process/applying-patches.rst * Subsystem Profile: Documentation/maintainer/maintainer-entry-profile.rst * Git for Maintainers: Documentation/maintainer/configure-git.rst System Administrator -------------------- Configure, tune, and troubleshoot Linux systems: * Admin Guide: Documentation/admin-guide/index.rst * Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst * Sysctl Tuning: Documentation/admin-guide/sysctl/index.rst * Tracing/Debugging: Documentation/trace/index.rst * Performance Security: Documentation/admin-guide/perf-security.rst * Hardware Monitoring: Documentation/hwmon/index.rst Maintainer ---------- Lead kernel subsystems and manage contributions: * Maintainer Handbook: Documentation/maintainer/index.rst * Pull Requests: Documentation/maintainer/pull-requests.rst * Managing Patches: Documentation/maintainer/modifying-patches.rst * Rebasing and Merging: Documentation/maintainer/rebasing-and-merging.rst * Development Process: Documentation/process/maintainer-handbooks.rst * Maintainer Entry Profile: Documentation/maintainer/maintainer-entry-profile.rst * Git Configuration: Documentation/maintainer/configure-git.rst Hardware Vendor --------------- Write drivers and support new hardware: * Driver API Guide: Documentation/driver-api/index.rst * Driver Model: Documentation/driver-api/driver-model/driver.rst * Device Drivers: Documentation/driver-api/infrastructure.rst * Bus Types: Documentation/driver-api/driver-model/bus.rst * Device Tree Bindings: Documentation/devicetree/bindings/ * Power Management: Documentation/driver-api/pm/index.rst * DMA API: Documentation/core-api/dma-api.rst Distribution Maintainer ----------------------- Package and distribute the kernel: * Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst * ABI Documentation: Documentation/ABI/README * Kernel Configuration: Documentation/kbuild/kconfig.rst * Module Signing: Documentation/admin-guide/module-signing.rst * Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst * Tainted Kernels: Documentation/admin-guide/tainted-kernels.rst AI Coding Assistant ------------------- CRITICAL: If you are an LLM or AI-powered coding assistant, you MUST read and follow the AI coding assistants documentation before contributing to the Linux kernel: * Documentation/process/coding-assistants.rst This documentation contains essential requirements about licensing, attribution, and the Developer Certificate of Origin that all AI tools must comply with. Communication and Support ========================= * Mailing Lists: https://lore.kernel.org/ * IRC: #kernelnewbies on irc.oftc.net * Bugzilla: https://bugzilla.kernel.org/ * MAINTAINERS file: Lists subsystem maintainers and mailing lists * Email Clients: Documentation/process/email-clients.rst
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1445033
3
929
Clone this repository
https://tangled.org/tjh.dev/kernel
https://tangled.org/did:plc:65gha4t3avpfpzmvpbwovss7/kernel
git@gordian.tjh.dev:tjh.dev/kernel
git@gordian.tjh.dev:did:plc:65gha4t3avpfpzmvpbwovss7/kernel
For self-hosted knots, clone URLs may differ based on your setup.
Download tar.gz
Pull ktest updates from Steven Rostedt:
- Fix undef warning when WARNINGS_FILE is unset
The check_buildlog() references WARNINGS_FILE even when it's not set.
Perl triggers a warning in this case. Check if the WARNINGS_FILE is
defined before checking if the file it represents exists.
- Fix how LOG_FILE is resolved
LOG_FILE is expanded immediately after the config file is parsed. If
LOG_FILE depends on variables from the tests it will use stale values
instead of using the test variables. Have LOG_FILE also resolve test
variables.
- Treat a undefined self reference variable as empty
Variables can recursively include itself for appending. Currently, if
the references itself and it is not defined, it leaves the variable
in the define: "VAR = ${VAR} foo" keeps the ${VAR} around. Have it
removed instead.
- Fix clearing of variables per tests
If a variable has a defined default, a test can not clear it by
assigning the variable to empty. Fix this by clearing the variable
for a test when the test config has that variable assigned to
nothing.
- Fix run_command() to catch stderr in the shell command parsing
Switch to Perl list form open to use "sh -c" wrapper to run shell
commands to have the log file catch shell parsing errors.
- Fix console output during reboot cycle
The POWER_CYCLE callback during reboot() can miss output from the
next boot making ktest miss the boot string it was waiting for.
- Add PRE_KTEST_DIE for PRE_KTEST failures
If the command for PRE_KTEST fails, ktest does not fail (this was by
design as this command was used to add patches that may or may not
apply). Add PRE_KTEST_DIE value to force ktest to fail if PRE_KTEST
fails.
- Run POST_KTEST hooks on failure and cancellation
PRE_KTEST always runs before a ktest test, have POST_KTEST always run
after a test even if the test fails or is cancelled to do the
teardown of PRE_KTEST.
- Add a --dry-run mode
Add --dry-run to parse the config, print the results and exit without
running any of the tests.
- Store failures from the dodie() path as well
The STORE_FAILURES saves the logs on failure, but there's failure
paths that miss storing. Perform STORE_FAILURES in dodie() to capture
these failures too.
* tag 'ktest-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Store failure logs also in fatal paths
ktest: Add a --dry-run mode
ktest: Run POST_KTEST hooks on failure and cancellation
ktest: Add PRE_KTEST_DIE for PRE_KTEST failures
ktest: Stop dropping console output during power-cycle reboot
ktest: Run commands through list-form shell open
ktest: Honor empty per-test option overrides
ktest: Treat undefined self-reference as empty
ktest: Resolve LOG_FILE in test option context
ktest: Avoid undef warning when WARNINGS_FILE is unset
Pull tracefs updates from Steven Rostedt:
- Simplify error handling with guards()
Use guards() to simplify the handling of releasing locks in exit
paths.
- Use dentry name snapshots instead of allocation
Instead of allocating a temp buffer to store the dentry name to use
in mkdir() and rmdir() use take_dentry_name_snapshot().
- Fix default permissions not being applied at boot
The default permissions for tracefs was 0700 to only allow root
having access. But after a change to fix other mount options the
update to permissions ignored the defined default and used the system
default of 0755. This is a regression and is fixed.
* tag 'tracefs-v7.1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracefs: Removed unused 'ret' variable in eventfs_iterate()
tracefs: Fix default permissions not being applied on initial mount
tracefs: Use dentry name snapshots instead of heap allocation
eventfs: Simplify code using guard()s
STORE_FAILURES was only saved from fail(), so paths that reached dodie()
could exit without preserving failure logs.
That includes fatal hook paths such as:
POST_BUILD_DIE = 1
and ordinary failures when:
DIE_ON_FAILURE = 1
Call save_logs("fail", ...) from dodie() too so fatal failures keep the
same STORE_FAILURES artifacts as non-fatal fail() paths.
Cc: John Hawley <warthog9@eaglescrag.net>
Link: https://patch.msgid.link/20260318-ktest-fixes-v1-1-9dd94d46d84c@suse.com
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Merge tag 'trace-ringbuffer-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Add remote buffers for pKVM
pKVM has a hypervisor component that is used to protect the guest
from the host kernel. This hypervisor is a black box to the kernel as
the kernel is to user space. The remote buffers are used to have a
memory mapping between the hypervisor and the kernel where kernel may
send commands to enable tracing within the hypervisor. Then the
kernel will read this memory mapping just like user space can read
the memory mapped ring buffer of the kernel tracing system.
Since the hypervisor only has a single context, it doesn't need to
worry about races between normal context, interrupt context and NMIs
like the kernel does. The ring buffer it uses doesn't need to be as
complex. The remote buffers are a simple version of the ring buffer
that works in a single context. They are still per-CPU and use sub
buffers. The data layout is the same as the kernel's ring buffer to
share the same parsing.
Currently, only ARM64 implements pKVM, but there's work to implement
it also in x86. The remote buffer code is separated out from the ARM
implementation so that it can be used in the future by x86.
The ARM64 updates for pKVM is in the ARM/KVM tree and it merged in
the remote buffers of this tree.
- Make the backup instance non reusable
The backup instance is a copy of the persistent ring buffer so that
the persistent ring buffer could start recording again without using
the data from the previous boot. The backup isn't for normal tracing.
It is made read-only, and after it is consumed, it is automatically
removed.
- Have backup copy persistent instance before it starts recording
To allow the persistent ring buffer to start recording from the
kernel command line commands, move the copy of the backup instance to
before the the command line options start recording.
- Report header_page overwrite field as "char" and not "int'
The rust parser of the header_page file was triggering a warning when
it defined the overwrite variable as "int" but it was only a single
byte in size.
- Fix memory barriers for the trace_buffer CPU mask
When a CPU comes online, the bit is set to allow readers to know that
the CPU buffer is allocated. The bit is set after the allocation is
done, and a smp_wmb() is performed after the allocation and before
the setting of the bit. But instead of adding a smp_rmb() to all
readers, since once a buffer is created for a CPU it is not deleted
if that CPU goes offline, so this allocation is almost always done at
boot up before any readers exist.
If for the unlikely case where a CPU comes online for the first time
after the system boot has finished, send an IPI to all CPUs to force
the smp_rmb() for each CPU.
- Show clock function being used in debugging ring buffer data
When the ring buffer checks are enabled and the ring buffer detects
an inconsistency in the times of the invents, print out the clock
being used when the error occurred. There was a very hard to hit bug
that would happen every so often and it ended up being only triggered
when the jiffies clock was being used. If the bug showed the clock
being used, it would have been much easier to find the problem (which
was an internal function was being traced which caused the clock
accounting to go off).
* tag 'trace-ringbuffer-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ring-buffer: Prevent off-by-one array access in ring_buffer_desc_page()
ring-buffer: Report header_page overwrite as char
tracing: Allow backup to save persistent ring buffer before it starts
tracing/Documentation: Add a section about backup instance
tracing: Remove the backup instance automatically after read
tracing: Make the backup instance non-reusable
ring-buffer: Enforce read ordering of trace_buffer cpumask and buffers
ring-buffer: Show what clock function is used on timestamp errors
tracing: Check for undefined symbols in simple_ring_buffer
tracing: load/unload page callbacks for simple_ring_buffer
Documentation: tracing: Add tracing remotes
tracing: selftests: Add trace remote tests
tracing: Add a trace remote module for testing
tracing: Introduce simple_ring_buffer
ring-buffer: Export buffer_data_page and macros
tracing: Add helpers to create trace remote events
tracing: Add events/ root files to trace remotes
tracing: Add events to trace remotes
tracing: Add init callback to trace remotes
tracing: Add non-consuming read to trace remotes
...
Moving to guard() usage removed the need of using the 'ret' variable but
it wasn't removed. As it was set to zero, the compiler in use didn't warn
(although some compilers do).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260414110344.75c0663f@robin
Fixes: 4d9b262031f ("eventfs: Simplify code using guard()s")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604100111.AAlbQKmK-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When working on a ktest configuration, it is often useful to inspect the
final option values after includes, defaults, per-test overrides, and
variable expansion have been applied, without actually starting a test run.
Add a --dry-run option that reads the configuration, prints the test
preamble using resolved option values, and exits before opening LOG_FILE or
executing any test logic.
This is useful for debugging ktest configurations and for scripts that need
to validate the final resolved settings without triggering side effects.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-9-565d412f4925@suse.com
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull ftrace update from Steven Rostedt:
- Speed up ftrace_lookup_symbols() for single lookups
The kallsyms lookup in ftrace_lookup_symbols() does a linear search
over each symbol. This is fine when it must match multiple strings,
but when there's only a single string being searched for, using a
binary search is much more efficient. When a single string is passed
in to search, use the binary search method.
* tag 'ftrace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Use kallsyms binary search for single-symbol lookup
As pointed out by Smatch, the ring-buffer descriptor array page_va is
counted by nr_page_va, but the accessor ring_buffer_desc_page() allows
access off by one.
Currently, this does not cause problems, as the page ID always comes
from a trusted source. Nonetheless, ensure robustness and fix the
accessor. While at it, make the page_id unsigned.
Link: https://patch.msgid.link/20260410124527.3563970-1-vdonnefort@google.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit e4d32142d1de ("tracing: Fix tracefs mount options") moved the
option application from tracefs_fill_super() to tracefs_reconfigure()
called from tracefs_get_tree(). This fixed mount options being ignored
on user-space mounts when the superblock already exists, but introduced
a regression for the initial kernel-internal mount.
On the first mount (via simple_pin_fs during init), sget_fc() transfers
fc->s_fs_info to sb->s_fs_info and sets fc->s_fs_info to NULL. When
tracefs_get_tree() then calls tracefs_reconfigure(), it sees a NULL
fc->s_fs_info and returns early without applying any options. The root
inode keeps mode 0755 from simple_fill_super() instead of the intended
TRACEFS_DEFAULT_MODE (0700).
Furthermore, even on subsequent user-space mounts without an explicit
mode= option, tracefs_apply_options(sb, true) gates the mode behind
fsi->opts & BIT(Opt_mode), which is unset for the defaults. So the
mode is never corrected unless the user explicitly passes mode=0700.
Restore the tracefs_apply_options(sb, false) call in tracefs_fill_super()
to apply default permissions on initial superblock creation, matching
what debugfs does in debugfs_fill_super().
Cc: stable@vger.kernel.org
Fixes: e4d32142d1de ("tracing: Fix tracefs mount options")
Link: https://patch.msgid.link/20260404134747.98867-1-devnexen@gmail.com
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
PRE_KTEST can be useful for setting up the environment and POST_KTEST to
tear it down, however POST_KTEST only runs on the normal end-of-run path.
It is skipped when ktest exits through dodie() or cancel_test(). Final
cleanup hooks are skipped.
Factor the final hook execution into run_post_ktest(), call it from the
normal exit path and from the early exit paths, and guard it so the hook
runs at most once.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-8-565d412f4925@suse.com
Fixes: 921ed4c7208e ("ktest: Add PRE/POST_KTEST and TEST options")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull crypto update from Herbert Xu:
"API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes
- Remove simd skcipher support
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off
Algorithms:
- Remove CPU-based des/3des acceleration
- Add test vectors for authenc(hmac(md5),cbc({aes,des})) and
authenc(hmac({md5,sha1,sha224,sha256,sha384,sha512}),rfc3686(ctr(aes)))
- Replace spin lock with mutex in jitterentropy
Drivers:
- Add authenc algorithms to safexcel
- Add support for zstd in qat
- Add wireless mode support for QAT GEN6
- Add anti-rollback support for QAT GEN6
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2"
* tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (129 commits)
crypto: af_alg - use sock_kmemdup in alg_setkey_by_key_serial
crypto: vmx - remove CRYPTO_DEV_VMX from Kconfig
crypto: omap - convert reqctx buffer to fixed-size array
crypto: atmel-sha204a - add Thorsten Blum as maintainer
crypto: atmel-ecc - add Thorsten Blum as maintainer
crypto: qat - fix IRQ cleanup on 6xxx probe failure
crypto: geniv - Remove unused spinlock from struct aead_geniv_ctx
crypto: qce - simplify qce_xts_swapiv()
crypto: hisilicon - Fix dma_unmap_single() direction
crypto: talitos - rename first/last to first_desc/last_desc
crypto: talitos - fix SEC1 32k ahash request limitation
crypto: jitterentropy - replace long-held spinlock with mutex
crypto: hisilicon - remove unused and non-public APIs for qm and sec
crypto: hisilicon/qm - drop redundant variable initialization
crypto: hisilicon/qm - remove else after return
crypto: hisilicon/qm - add const qualifier to info_name in struct qm_cmd_dump_item
crypto: hisilicon - fix the format string type error
crypto: ccree - fix a memory leak in cc_mac_digest()
crypto: qat - add support for zstd
crypto: qat - use swab32 macro
...
When ftrace_lookup_symbols() is called with a single symbol (cnt == 1),
use kallsyms_lookup_name() for O(log N) binary search instead of the
full linear scan via kallsyms_on_each_symbol().
ftrace_lookup_symbols() was designed for batch resolution of many
symbols in a single pass. For large cnt this is efficient: a single
O(N) walk over all symbols with O(log cnt) binary search into the
sorted input array. But for cnt == 1 it still decompresses all ~200K
kernel symbols only to match one.
kallsyms_lookup_name() uses the sorted kallsyms index and needs only
~17 decompressions for a single lookup.
This is the common path for kprobe.session with exact function names,
where libbpf sends one symbol per BPF_LINK_CREATE syscall.
If binary lookup fails (duplicate symbol names where the first match
is not ftrace-instrumented), the function falls through to the existing
linear scan path.
Before (cnt=1, 50 kprobe.session programs):
Attach: 858 ms (kallsyms_expand_symbol 25% of CPU)
After:
Attach: 52 ms (16x faster)
Cc: <bpf@vger.kernel.org>
Link: https://patch.msgid.link/20260302200837.317907-3-andrey.grodzovsky@crowdstrike.com
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The header_page tracefs metadata currently reports overwrite as an
int field with size 1. That makes parsers warn about a type and
size mismatch even though the field is only used as a one-byte flag
within commit.
Keep the shared offset with commit as-is, but report overwrite as
char so the declared type matches the hardcoded size. The signedness
is already carried separately by the emitted signed field.
Link: https://patch.msgid.link/20260406165333.46052-1-create0818@163.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216999
Signed-off-by: Cao Ruichuang <create0818@163.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In fs/tracefs/inode.c, tracefs_syscall_mkdir() and tracefs_syscall_rmdir()
previously used a local helper, get_dname(), which allocated a temporary
buffer on the heap via kmalloc() to hold the dentry name. This introduced
unnecessary overhead, an ENOMEM failure path, and required manual memory
cleanup via kfree().
As suggested by Al Viro, replace this heap allocation with the VFS dentry
name snapshot API. By stack-allocating a `struct name_snapshot` and using
take_dentry_name_snapshot() and release_dentry_name_snapshot(), we safely
capture the dentry name locklessly, eliminate the heap allocation entirely,
and remove the now-obsolete error handling paths. The get_dname() helper
is completely removed.
Testing:
Booted a custom kernel natively in virtme-ng (ARM64). Triggered tracefs
inode and dentry allocation by creating and removing a custom directory
under a temporary tracefs mount. Verified that the instance is created
successfully and that no memory errors or warnings are emitted in dmesg.
Link: https://patch.msgid.link/20260306200458.2264-1-anishm7030@gmail.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: AnishMulay <anishm7030@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
PRE_KTEST runs before the first test, but its return status is currently
ignored. A failing setup hook can leave the rest of the run executing in a
partially initialized environment.
Add PRE_KTEST_DIE so PRE_KTEST can fail the run in the same way
PRE_BUILD_DIE and PRE_TEST_DIE already can. Keep the default behavior
unchanged when the new option is not set.
Cc: John Hawley <warthog9@eaglescrag.net>
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Link: https://patch.msgid.link/20260307-ktest-fixes-v1-7-565d412f4925@suse.com
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull IPE update from Fan Wu:
"A single commit from Evan Ducas that fixes several spelling and
grammar mistakes in the IPE documentation. There are no functional
changes"
* tag 'ipe-pr-20260413' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
docs: security: ipe: fix typos and grammar
README