tjh.dev/kernel at ea8e356acb165cb1fd75537a52e1f66e5e76c538

When a disk is saturated, it is common for no IOs to complete within a
timer period. Currently, in this case, rq_wait_pct and missed_ppm are
calculated as 0, the iocost incorrectly interprets this as meeting QoS
targets and resets busy_level to 0.

This reset prevents busy_level from reaching the threshold (4) needed
to reduce vrate. On certain cloud storage, such as Azure Premium SSD,
we observed that iocost may fail to reduce vrate for tens of seconds
during saturation, failing to mitigate noisy neighbor issues.

Fix this by tracking the number of IO completions (nr_done) in a period.
If nr_done is 0 and there are lagging IOs, the saturation status is
unknown, so we keep busy_level unchanged.

The issue is consistently reproducible on Azure Standard_D8as_v5 (Dasv5)
VMs with 512GB Premium SSD (P20) using the script below. It was not
observed on GCP n2d VMs (with 100G pd-ssd and 1.5T local-ssd), and no
regressions were found with this patch. In this script, cgA performs
large IOs with iodepth=128, while cgB performs small IOs with iodepth=1
rate_iops=100 rw=randrw. With iocost enabled, we expect it to throttle
cgA, the submission latency (slat) of cgA should be significantly higher,
cgB can reach 200 IOPS and the completion latency (clat) should below.

BLK_DEVID="8:0"
MODEL="rbps=173471131 rseqiops=3566 rrandiops=3566 wbps=173333269 wseqiops=3566 wrandiops=3566"
QOS="rpct=90 rlat=3500 wpct=90 wlat=3500 min=80 max=10000"

echo "$BLK_DEVID ctrl=user model=linear $MODEL" > /sys/fs/cgroup/io.cost.model
echo "$BLK_DEVID enable=1 ctrl=user $QOS" > /sys/fs/cgroup/io.cost.qos

CG_A="/sys/fs/cgroup/cgA"
CG_B="/sys/fs/cgroup/cgB"

FILE_A="/path/to/sda/A.fio.testfile"
FILE_B="/path/to/sda/B.fio.testfile"
RESULT_DIR="./iocost_results_$(date +%Y%m%d_%H%M%S)"

mkdir -p "$CG_A" "$CG_B" "$RESULT_DIR"

get_result() {
local file=$1
local label=$2

local results=$(jq -r '
.jobs[0].mixed |
( .iops | tonumber | round ) as $iops |
( .bw_bytes / 1024 / 1024 ) as $bps |
( .slat_ns.mean / 1000000 ) as $slat |
( .clat_ns.mean / 1000000 ) as $avg |
( .clat_ns.max / 1000000 ) as $max |
( .clat_ns.percentile["90.000000"] / 1000000 ) as $p90 |
( .clat_ns.percentile["99.000000"] / 1000000 ) as $p99 |
( .clat_ns.percentile["99.900000"] / 1000000 ) as $p999 |
( .clat_ns.percentile["99.990000"] / 1000000 ) as $p9999 |
"\($iops)|\($bps)|\($slat)|\($avg)|\($max)|\($p90)|\($p99)|\($p999)|\($p9999)"
' "$file")

IFS='|' read -r iops bps slat avg max p90 p99 p999 p9999 <<<"$results"
printf "%-8s %-6s %-7.2f %-8.2f %-8.2f %-8.2f %-8.2f %-8.2f %-8.2f %-8.2f\n" \
"$label" "$iops" "$bps" "$slat" "$avg" "$max" "$p90" "$p99" "$p999" "$p9999"
}

run_fio() {
local cg_path=$1
local filename=$2
local name=$3
local bs=$4
local qd=$5
local out=$6
shift 6
local extra=$@

(
pid=$(sh -c 'echo $PPID')
echo $pid >"${cg_path}/cgroup.procs"
fio --name="$name" --filename="$filename" --direct=1 --rw=randrw --rwmixread=50 \
--ioengine=libaio --bs="$bs" --iodepth="$qd" --size=4G --runtime=10 \
--time_based --group_reporting --unified_rw_reporting=mixed \
--output-format=json --output="$out" $extra >/dev/null 2>&1
) &
}

echo "Starting Test ..."

for bs_b in "4k" "32k" "256k"; do
echo "Running iteration: BS=$bs_b"
out_a="${RESULT_DIR}/cgA_1m.json"
out_b="${RESULT_DIR}/cgB_${bs_b}.json"

# cgA: Heavy background (BS 1MB, QD 128)
run_fio "$CG_A" "$FILE_A" "cgA" "1m" 128 "$out_a"
# cgB: Latency sensitive (Variable BS, QD 1, Read/Write IOPS limit 100)
run_fio "$CG_B" "$FILE_B" "cgB" "$bs_b" 1 "$out_b" "--rate_iops=100"

wait
SUMMARY_DATA+="$(get_result "$out_a" "cgA-1m")"$'\n'
SUMMARY_DATA+="$(get_result "$out_b" "cgB-$bs_b")"$'\n\n'
done

echo -e "\nFinal Results Summary:\n"

printf "%-8s %-6s %-7s %-8s %-8s %-8s %-8s %-8s %-8s %-8s\n" \
"" "" "" "slat" "clat" "clat" "clat" "clat" "clat" "clat"
printf "%-8s %-6s %-7s %-8s %-8s %-8s %-8s %-8s %-8s %-8s\n\n" \
"CGROUP" "IOPS" "MB/s" "avg(ms)" "avg(ms)" "max(ms)" "P90(ms)" "P99" "P99.9" "P99.99"
echo "$SUMMARY_DATA"

echo "Results saved in $RESULT_DIR"

Before:
slat clat clat clat clat clat clat
CGROUP IOPS MB/s avg(ms) avg(ms) max(ms) P90(ms) P99 P99.9 P99.99

cgA-1m 166 166.37 3.44 748.95 1298.29 977.27 1233.13 1300.23 1300.23
cgB-4k 5 0.02 0.02 181.74 761.32 742.39 759.17 759.17 759.17

cgA-1m 167 166.51 1.98 748.68 1549.41 809.50 1451.23 1551.89 1551.89
cgB-32k 6 0.18 0.02 169.98 761.76 742.39 759.17 759.17 759.17

cgA-1m 166 165.55 2.89 750.89 1540.37 851.44 1451.23 1535.12 1535.12
cgB-256k 5 1.30 0.02 191.35 759.51 750.78 759.17 759.17 759.17

After:
slat clat clat clat clat clat clat
CGROUP IOPS MB/s avg(ms) avg(ms) max(ms) P90(ms) P99 P99.9 P99.99

cgA-1m 162 162.48 6.14 749.69 850.02 826.28 834.67 843.06 851.44
cgB-4k 199 0.78 0.01 1.95 42.12 2.57 7.50 34.87 42.21

cgA-1m 146 146.20 6.83 833.04 908.68 893.39 901.78 910.16 910.16
cgB-32k 200 6.25 0.01 2.32 31.40 3.06 7.50 16.58 31.33

cgA-1m 110 110.46 9.04 1082.67 1197.91 1182.79 1199.57 1199.57 1199.57
cgB-256k 200 49.98 0.02 3.69 22.20 4.88 9.11 20.05 22.15

Signed-off-by: Jialin Wang <wjl.linux@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://patch.msgid.link/20260331100509.182882-1-wjl.linux@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

f91ffe89

Jialin Wang

1 month ago

blk-cgroup: fix disk reference leak in blkcg_maybe_throttle_current()

23308af7

Jackie Liu

1 month ago

branches 3

master 4 hours ago default

compare

nocache-cleanup 1 month ago

compare

for-next 1 year ago

compare

tags 929

v7.1-rc2

3 days ago latest

README

Linux kernel
============

The Linux kernel is the core of any Linux operating system. It manages hardware,
system resources, and provides the fundamental services for all other software.

Quick Start
-----------

* Report a bug: See Documentation/admin-guide/reporting-issues.rst
* Get the latest kernel: https://kernel.org
* Build the kernel: See Documentation/admin-guide/quickly-build-trimmed-linux.rst
* Join the community: https://lore.kernel.org/

Essential Documentation
-----------------------

All users should be familiar with:

* Building requirements: Documentation/process/changes.rst
* Code of Conduct: Documentation/process/code-of-conduct.rst
* License: See COPYING

Documentation can be built with make htmldocs or viewed online at:
https://www.kernel.org/doc/html/latest/


Who Are You?
============

Find your role below:

* New Kernel Developer - Getting started with kernel development
* Academic Researcher - Studying kernel internals and architecture
* Security Expert - Hardening and vulnerability analysis
* Backport/Maintenance Engineer - Maintaining stable kernels
* System Administrator - Configuring and troubleshooting
* Maintainer - Leading subsystems and reviewing patches
* Hardware Vendor - Writing drivers for new hardware
* Distribution Maintainer - Packaging kernels for distros
* AI Coding Assistant - LLMs and AI-powered development tools


For Specific Users
==================

New Kernel Developer
--------------------

Welcome! Start your kernel development journey here:

* Getting Started: Documentation/process/development-process.rst
* Your First Patch: Documentation/process/submitting-patches.rst
* Coding Style: Documentation/process/coding-style.rst
* Build System: Documentation/kbuild/index.rst
* Development Tools: Documentation/dev-tools/index.rst
* Kernel Hacking Guide: Documentation/kernel-hacking/hacking.rst
* Core APIs: Documentation/core-api/index.rst

Academic Researcher
-------------------

Explore the kernel's architecture and internals:

* Researcher Guidelines: Documentation/process/researcher-guidelines.rst
* Memory Management: Documentation/mm/index.rst
* Scheduler: Documentation/scheduler/index.rst
* Networking Stack: Documentation/networking/index.rst
* Filesystems: Documentation/filesystems/index.rst
* RCU (Read-Copy Update): Documentation/RCU/index.rst
* Locking Primitives: Documentation/locking/index.rst
* Power Management: Documentation/power/index.rst

Security Expert
---------------

Security documentation and hardening guides:

* Security Documentation: Documentation/security/index.rst
* LSM Development: Documentation/security/lsm-development.rst
* Self Protection: Documentation/security/self-protection.rst
* Reporting Vulnerabilities: Documentation/process/security-bugs.rst
* CVE Procedures: Documentation/process/cve.rst
* Embargoed Hardware Issues: Documentation/process/embargoed-hardware-issues.rst
* Security Features: Documentation/userspace-api/seccomp_filter.rst

Backport/Maintenance Engineer
-----------------------------

Maintain and stabilize kernel versions:

* Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst
* Backporting Guide: Documentation/process/backporting.rst
* Applying Patches: Documentation/process/applying-patches.rst
* Subsystem Profile: Documentation/maintainer/maintainer-entry-profile.rst
* Git for Maintainers: Documentation/maintainer/configure-git.rst

System Administrator
--------------------

Configure, tune, and troubleshoot Linux systems:

* Admin Guide: Documentation/admin-guide/index.rst
* Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst
* Sysctl Tuning: Documentation/admin-guide/sysctl/index.rst
* Tracing/Debugging: Documentation/trace/index.rst
* Performance Security: Documentation/admin-guide/perf-security.rst
* Hardware Monitoring: Documentation/hwmon/index.rst

Maintainer
----------

Lead kernel subsystems and manage contributions:

* Maintainer Handbook: Documentation/maintainer/index.rst
* Pull Requests: Documentation/maintainer/pull-requests.rst
* Managing Patches: Documentation/maintainer/modifying-patches.rst
* Rebasing and Merging: Documentation/maintainer/rebasing-and-merging.rst
* Development Process: Documentation/process/maintainer-handbooks.rst
* Maintainer Entry Profile: Documentation/maintainer/maintainer-entry-profile.rst
* Git Configuration: Documentation/maintainer/configure-git.rst

Hardware Vendor
---------------

Write drivers and support new hardware:

* Driver API Guide: Documentation/driver-api/index.rst
* Driver Model: Documentation/driver-api/driver-model/driver.rst
* Device Drivers: Documentation/driver-api/infrastructure.rst
* Bus Types: Documentation/driver-api/driver-model/bus.rst
* Device Tree Bindings: Documentation/devicetree/bindings/
* Power Management: Documentation/driver-api/pm/index.rst
* DMA API: Documentation/core-api/dma-api.rst

Distribution Maintainer
-----------------------

Package and distribute the kernel:

* Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst
* ABI Documentation: Documentation/ABI/README
* Kernel Configuration: Documentation/kbuild/kconfig.rst
* Module Signing: Documentation/admin-guide/module-signing.rst
* Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst
* Tainted Kernels: Documentation/admin-guide/tainted-kernels.rst

AI Coding Assistant
-------------------

CRITICAL: If you are an LLM or AI-powered coding assistant, you MUST read and
follow the AI coding assistants documentation before contributing to the Linux
kernel:

* Documentation/process/coding-assistants.rst

This documentation contains essential requirements about licensing, attribution,
and the Developer Certificate of Origin that all AI tools must comply with.


Communication and Support
=========================

* Mailing Lists: https://lore.kernel.org/
* IRC: #kernelnewbies on irc.oftc.net
* Bugzilla: https://bugzilla.kernel.org/
* MAINTAINERS file: Lists subsystem maintainers and mailing lists
* Email Clients: Documentation/process/email-clients.rst

Configure Feed

Configure Feed

Clone this repository