tjh.dev / kernel
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

HID: quirks: Set ALWAYS_POLL for LOGITECH_BOLT_RECEIVER

The Logitech Bolt receiver once connected to a wireless device will
generate data on interface 2. If this data isn't polled, when the USB
port it is connected to gets suspended (and if that happens within 5
minutes of the last input from the wireless device), it will trigger a
remote wakeup 3 seconds later, which will result in a spurious system
wakeup if the port was suspended as part of system sleep.

Set the ALWAYS_POLL quirk for this device to ensure interface 2 is
always polled and this spurious wakeup never happens.

With this change in place the system can be suspended with the receiver
plugged in and the system can be woken up when an input is sent from the
wireless device.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

authored by

Nícolas F. R. A. Prado and committed by
Jiri Kosina d4229fc0 1badfc43

+1
+1
drivers/hid/hid-quirks.c
··· 134 134 { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_6019), HID_QUIRK_ALWAYS_POLL }, 135 135 { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_602E), HID_QUIRK_ALWAYS_POLL }, 136 136 { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_6093), HID_QUIRK_ALWAYS_POLL }, 137 + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER), HID_QUIRK_ALWAYS_POLL }, 137 138 { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_C007), HID_QUIRK_ALWAYS_POLL }, 138 139 { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_C077), HID_QUIRK_ALWAYS_POLL }, 139 140 { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KEYBOARD_G710_PLUS), HID_QUIRK_NOGET },