This reverts commit f707d6b9e7c18f669adfdb443906d46cfbaaa0c1.

Under rare circumstances, multiple udev threads can collect i801 device
info on boot and walk i801_acpi_io_handler somewhat concurrently. The
first will note the area is reserved by acpi to prevent further touches.
This ultimately causes the area to be deregistered. The second will
enter i801_acpi_io_handler after the area is unregistered but before a
check can be made that the area is unregistered. i2c_lock_bus relies on
the now unregistered area containing lock_ops to lock the bus. The end
result is a kernel panic on boot with the following backtrace;

[ 14.971872] ioatdma 0000:09:00.2: enabling device (0100 -> 0102)
[ 14.971873] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 14.971880] #PF: supervisor read access in kernel mode
[ 14.971884] #PF: error_code(0x0000) - not-present page
[ 14.971887] PGD 0 P4D 0
[ 14.971894] Oops: 0000 [#1] PREEMPT SMP PTI
[ 14.971900] CPU: 5 PID: 956 Comm: systemd-udevd Not tainted 5.14.0-611.5.1.el9_7.x86_64 #1
[ 14.971905] Hardware name: XXXXXXXXXXXXXXXXXXXXXXX BIOS 1.20.10.SV91 01/30/2023
[ 14.971908] RIP: 0010:i801_acpi_io_handler+0x2d/0xb0 [i2c_i801]
[ 14.971929] Code: 00 00 49 8b 40 20 41 57 41 56 4d 8b b8 30 04 00 00 49 89 ce 41 55 41 89 d5 41 54 49 89 f4 be 02 00 00 00 55 4c 89 c5 53 89 fb <48> 8b 00 4c 89 c7 e8 18 61 54 e9 80 bd 80 04 00 00 00 75 09 4c 3b
[ 14.971933] RSP: 0018:ffffbaa841483838 EFLAGS: 00010282
[ 14.971938] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9685e01ba568
[ 14.971941] RDX: 0000000000000008 RSI: 0000000000000002 RDI: 0000000000000000
[ 14.971944] RBP: ffff9685ca22f028 R08: ffff9685ca22f028 R09: ffff9685ca22f028
[ 14.971948] R10: 000000000000000b R11: 0000000000000580 R12: 0000000000000580
[ 14.971951] R13: 0000000000000008 R14: ffff9685e01ba568 R15: ffff9685c222f000
[ 14.971954] FS: 00007f8287c0ab40(0000) GS:ffff96a47f940000(0000) knlGS:0000000000000000
[ 14.971959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 14.971963] CR2: 0000000000000000 CR3: 0000000168090001 CR4: 00000000003706f0
[ 14.971966] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 14.971968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 14.971972] Call Trace:
[ 14.971977] <TASK>
[ 14.971981] ? show_trace_log_lvl+0x1c4/0x2df
[ 14.971994] ? show_trace_log_lvl+0x1c4/0x2df
[ 14.972003] ? acpi_ev_address_space_dispatch+0x16e/0x3c0
[ 14.972014] ? __die_body.cold+0x8/0xd
[ 14.972021] ? page_fault_oops+0x132/0x170
[ 14.972028] ? exc_page_fault+0x61/0x150
[ 14.972036] ? asm_exc_page_fault+0x22/0x30
[ 14.972045] ? i801_acpi_io_handler+0x2d/0xb0 [i2c_i801]
[ 14.972061] acpi_ev_address_space_dispatch+0x16e/0x3c0
[ 14.972069] ? __pfx_i801_acpi_io_handler+0x10/0x10 [i2c_i801]
[ 14.972085] acpi_ex_access_region+0x5b/0xd0
[ 14.972093] acpi_ex_field_datum_io+0x73/0x2e0
[ 14.972100] acpi_ex_read_data_from_field+0x8e/0x230
[ 14.972106] acpi_ex_resolve_node_to_value+0x23d/0x310
[ 14.972114] acpi_ds_evaluate_name_path+0xad/0x110
[ 14.972121] acpi_ds_exec_end_op+0x321/0x510
[ 14.972127] acpi_ps_parse_loop+0xf7/0x680
[ 14.972136] acpi_ps_parse_aml+0x17a/0x3d0
[ 14.972143] acpi_ps_execute_method+0x137/0x270
[ 14.972150] acpi_ns_evaluate+0x1f4/0x2e0
[ 14.972158] acpi_evaluate_object+0x134/0x2f0
[ 14.972164] acpi_evaluate_integer+0x50/0xe0
[ 14.972173] ? vsnprintf+0x24b/0x570
[ 14.972181] acpi_ac_get_state.part.0+0x23/0x70
[ 14.972189] get_ac_property+0x4e/0x60
[ 14.972195] power_supply_show_property+0x90/0x1f0
[ 14.972205] add_prop_uevent+0x29/0x90
[ 14.972213] power_supply_uevent+0x109/0x1d0
[ 14.972222] dev_uevent+0x10e/0x2f0
[ 14.972228] uevent_show+0x8e/0x100
[ 14.972236] dev_attr_show+0x19/0x40
[ 14.972246] sysfs_kf_seq_show+0x9b/0x100
[ 14.972253] seq_read_iter+0x120/0x4b0
[ 14.972262] ? selinux_file_permission+0x106/0x150
[ 14.972273] vfs_read+0x24f/0x3a0
[ 14.972284] ksys_read+0x5f/0xe0
[ 14.972291] do_syscall_64+0x5f/0xe0
...

The kernel panic is mitigated by setting limiting the count of udev
children to 1. Revert to using the acpi_lock to continue protecting
marking the area as owned by firmware without relying on a lock in
a potentially unmapped region of memory.

Fixes: f707d6b9e7c1 ("i2c: i801: replace acpi_lock with I2C bus lock")
Signed-off-by: Charles Haithcock <chaithco@redhat.com>
[wsa: added Fixes-tag and updated comment stating the importance of the lock]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Pull kvm fixes from Paolo Bonzini:
"Arm:

- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host

- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature
set

- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent

- Don't leak stage-2 mappings in protected mode

- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB

- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]

- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling

- Fix slightly abusive const-ification in vgic_set_kvm_info()

Generic:

- Remove internal Kconfigs that are now set on all architectures

- Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
KVM: arm64: Deduplicate ASID retrieval code
irqchip/gic-v5: Fix inversion of IRS_IDR0.virt flag
KVM: arm64: Revert accidental drop of kvm_uninit_stage2_mmu() for non-NV VMs
KVM: arm64: Fix protected mode handling of pages larger than 4kB
KVM: arm64: vgic: Handle const qualifier from gic_kvm_info allocation type
KVM: arm64: Remove redundant kern_hyp_va() in unpin_host_sve_state()
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
KVM: arm64: Optimise away S1POE handling when not supported by host
KVM: arm64: Hide S1POE from guests when not supported by the host

Pull debugobjects fix from Thomas Gleixner:
"A single fix for debugobjects.

The deferred page initialization prevents debug objects from
allocating slab pages until the initialization is complete. That
causes depletion of the pool and disabling of debugobjects.

The reason is that debugobjects uses __GFP_HIGH for allocations as it
might be invoked from arbitrary contexts. When PREEMPT_COUNT is
disabled there is no way to know whether the context is safe to set
__GFP_KSWAPD_RECLAIM.

This worked until v6.18. Since then allocations w/o a reclaim flag
cause new_slab() to end up in alloc_frozen_pages_nolock_noprof(),
which returns early when deferred page initialization has not yet
completed.

Work around that when PREEMPT_COUNT is enabled as the preempt counter
allows debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when
the context is preemtible. When PREEMPT_COUNT is disabled the context
is unknown and the reclaim bit can't be set because the caller might
hold locks which might deadlock in the allocator.

That makes debugobjects depend on PREEMPT_COUNT ||
!DEFERRED_STRUCT_PAGE_INIT, which limits the coverage slightly, but
keeps it functional for most cases"

* tag 'core-debugobjects-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Make it work with deferred page initialization - again

KVM/arm64 fixes for 7.0, take #1

- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host

- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature set

- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent

- Don't leak stage-2 mappings in protected mode

- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB

- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered...

- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling

- Fix slightly abusive const-ification in vgic_set_kvm_info()

Pull x86 fixes from Ingo Molnar:

- Fix speculative safety in fred_extint()

- Fix __WARN_printf() trap in early_fixup_exception()

- Fix clang-build boot bug for unusual alignments, triggered by
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y

- Replace the final few __ASSEMBLY__ stragglers that snuck in lately
into non-UAPI x86 headers and use __ASSEMBLER__ consistently (again)

* tag 'x86-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers: Replace __ASSEMBLY__ stragglers with __ASSEMBLER__
x86/cfi: Fix CFI rewrite for odd alignments
x86/bug: Handle __WARN_printf() trap in early_fixup_exception()
x86/fred: Correct speculative safety in fred_extint()

debugobjects uses __GFP_HIGH for allocations as it might be invoked
within locked regions. That worked perfectly fine until v6.18. It still
works correctly when deferred page initialization is disabled and works
by chance when no page allocation is required before deferred page
initialization has completed.

Since v6.18 allocations w/o a reclaim flag cause new_slab() to end up in
alloc_frozen_pages_nolock_noprof(), which returns early when deferred
page initialization has not yet completed. As the deferred page
initialization takes quite a while the debugobject pool is depleted and
debugobjects are disabled.

This can be worked around when PREEMPT_COUNT is enabled as that allows
debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when the context
is preemtible. When PREEMPT_COUNT is disabled the context is unknown and
the reclaim bit can't be set because the caller might hold locks which
might deadlock in the allocator.

In preemptible context the reclaim bit is harmless and not a performance
issue as that's usually invoked from slow path initialization context.

That makes debugobjects depend on PREEMPT_COUNT || !DEFERRED_STRUCT_PAGE_INIT.

Fixes: af92793e52c3 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://patch.msgid.link/87pl6gznti.ffs@tglx

KVM_CAP_SYNC_MMU is provided by KVM's MMU notifiers, which are now always
available. Move the definition from individual architectures to common
code.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We currently have three versions of the ASID retrieval code, one
in the S1 walker, and two in the VNCR handling (although the last
two are limited to the EL2&0 translation regime).

Make this code common, and take this opportunity to also simplify
the code a bit while switching over to the TTBRx_EL1_ASID macro.

Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260225104718.14209-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>

Pull timer fix from Ingo Molnar:
"Improve the inlining of jiffies_to_msecs() and jiffies_to_usecs(), for
the common HZ=100, 250 or 1000 cases. Only use a function call for odd
HZ values like HZ=300 that generate more code.

The function call overhead showed up in performance tests of the TCP
code"

* tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/jiffies: Inline jiffies_to_msecs() and jiffies_to_usecs()

After converting the __ASSEMBLY__ statements to __ASSEMBLER__ in
commit 24a295e4ef1ca ("x86/headers: Replace __ASSEMBLY__ with
__ASSEMBLER__ in non-UAPI headers"), some new code has been
added that uses __ASSEMBLY__ again. Convert these stragglers, too.

This is a mechanical patch, done with a simple "sed -i" command.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251218182029.166993-1-thuth@redhat.com

All architectures now use MMU notifier for KVM page table management.
Remove the Kconfig symbol and the code that is used when it is
disabled.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

It appears that a !! became ! during a cleanup, resulting in inverted
logic when detecting if a host GICv5 implementation is capable of
virtualization.

Re-add the missing !, fixing the behaviour.

Fixes: 3227c3a89d65f ("irqchip/gic-v5: Check if impl is virt capable")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://patch.msgid.link/20260225083130.3378490-1-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>

Pull scheduler fixes from Ingo Molnar:

- Fix zero_vruntime tracking when there's a single task running

- Fix slice protection logic

- Fix the ->vprot logic for reniced tasks

- Fix lag clamping in mixed slice workloads

- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected un-inlining,
which triggers with older compilers

- Fix a comment in the rseq registration rseq_size bound check code

- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and want to
avoid. The visible ugliness of the new reserved field will be avoided
the next time the RSEQ area is extended.

* tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: slice ext: Ensure rseq feature size differs from original rseq size
rseq: Clarify rseq registration rseq_size bound check comment
sched/core: Fix wakeup_preempt's next_class tracking
rseq: Mark rseq_arm_slice_extension_timer() __always_inline
sched/fair: Fix lag clamp
sched/eevdf: Update se->vprot in reweight_entity()
sched/fair: Only set slice protection at pick time
sched/fair: Fix zero_vruntime tracking

For common cases (HZ=100, 250 or 1000), these helpers are at most one
multiply, so there is no point calling a tiny function.

Keep them out of line for HZ=300 and others.

This saves cycles in TCP fast path, among other things.

$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/8 grow/shrink: 25/89 up/down: 530/-3474 (-2944)
...
nla_put_msecs 193 - -193
message_stats_print 2131 920 -1211
Total: Before=25365208, After=25362264, chg -0.01%

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260210170226.57209-1-edumazet@google.com

Rustam reported his clang builds did not boot properly; turns out his
.config has: CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y set.

Fix up the FineIBT code to deal with this unusual alignment.

Fixes: 931ab63664f0 ("x86/ibt: Implement FineIBT")
Reported-by: Rustam Kovhaev <rkovhaev@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Rustam Kovhaev <rkovhaev@gmail.com>

Pull i2c fix from Wolfram Sang:

- imx: preserve error state during SMBus block read length handling

* tag 'i2c-for-6.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: preserve error state in block data length handler

Commit 0c4762e26879 ("KVM: arm64: nv: Avoid NV stage-2 code when NV is
not supported") added an early return to several functions in
arch/arm64/kvm/nested.c to prevent a UBSAN shift-out-of-bounds error
when accessing the pgt union for non-nested VMs.

However, this early return was inadvertently applied to
kvm_arch_flush_shadow_all() as well, causing it to skip the call to
kvm_uninit_stage2_mmu(kvm) for all non-nested VMs.

For pKVM, skipping this teardown means the host never unshares the
guest's memory with the EL2 hypervisor. When the host kernel later
recycles these leaked pages for a new VM, it attempts to re-share them.
The hypervisor correctly rejects this with -EPERM, triggering a host
WARN_ON and hanging the guest.

Fix this by dropping the early return from kvm_arch_flush_shadow_all().
The for-loop guarding the nested MMU cleanup already bounds itself when
nested_mmus_size == 0, allowing execution to proceed to
kvm_uninit_stage2_mmu() as intended.

Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/60916cb6-f460-4751-b910-f63c58700ad0@sirena.org.uk/
Fixes: 0c4762e26879 ("KVM: arm64: nv: Avoid NV stage-2 code when NV is not supported")
Signed-off-by: Fuad Tabba <tabba@google.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260222083352.89503-1-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>

Pull perf events fixes from Ingo Molnar:

- Fix lock ordering bug found by lockdep in perf_event_wakeup()

- Fix uncore counter enumeration on Granite Rapids and Sierra Forest

- Fix perf_mmap() refcount bug found by Syzkaller

- Fix __perf_event_overflow() vs perf_remove_from_context() race

* tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
perf/core: Fix refcount bug and potential UAF in perf_mmap
perf/x86/intel/uncore: Add per-scheduler IMC CAS count events
perf/core: Fix invalid wait context in ctx_sched_in()

Before rseq became extensible, its original size was 32 bytes even
though the active rseq area was only 20 bytes. This had the following
impact in terms of userspace ecosystem evolution:

* The GNU libc between 2.35 and 2.39 expose a __rseq_size symbol set
to 32, even though the size of the active rseq area is really 20.
* The GNU libc 2.40 changes this __rseq_size to 20, thus making it
express the active rseq area.
* Starting from glibc 2.41, __rseq_size corresponds to the
AT_RSEQ_FEATURE_SIZE from getauxval(3).

This means that users of __rseq_size can always expect it to
correspond to the active rseq area, except for the value 32, for
which the active rseq area is 20 bytes.

Exposing a 32 bytes feature size would make life needlessly painful
for userspace. Therefore, add a reserved field at the end of the
rseq area to bump the feature size to 33 bytes. This reserved field
is expected to be replaced with whatever field will come next,
expecting that this field will be larger than 1 byte.

The effect of this change is to increase the size from 32 to 64 bytes
before we actually have fields using that memory.

Clarify the allocation size and alignment requirements in the struct
rseq uapi comment.

Change the value returned by getauxval(AT_RSEQ_ALIGN) to return the
value of the active rseq area size rounded up to next power of 2, which
guarantees that the rseq structure will always be aligned on the nearest
power of two large enough to contain it, even as it grows. Change the
alignment check in the rseq registration accordingly.

This will minimize the amount of ABI corner-cases we need to document
and require userspace to play games with. The rule stays simple when
__rseq_size != 32:

#define rseq_field_available(field) (__rseq_size >= offsetofend(struct rseq_abi, field))

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260220200642.1317826-3-mathieu.desnoyers@efficios.com

Pull powerpc updates for 7.0

- Implement masked user access

- Add bpf support for internal only per-CPU instructions and inline the
bpf_get_smp_processor_id() and bpf_get_current_task() functions

- Fix pSeries MSI-X allocation failure when quota is exceeded

- Fix recursive pci_lock_rescan_remove locking in EEH event handling

- Support tailcalls with subprogs & BPF exceptions on 64bit

- Extend "trusted" keys to support the PowerVM Key Wrapping Module
(PKWM)

Thanks to Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li,
Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam
Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket
Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, and Venkat Rao Bagalkote.

* tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (27 commits)
powerpc/pseries: plpks: export plpks_wrapping_is_supported
docs: trusted-encryped: add PKWM as a new trust source
keys/trusted_keys: establish PKWM as a trusted source
pseries/plpks: add HCALLs for PowerVM Key Wrapping Module
pseries/plpks: expose PowerVM wrapping features via the sysfs
powerpc/pseries: move the PLPKS config inside its own sysfs directory
pseries/plpks: fix kernel-doc comment inconsistencies
powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()
powerpc: kgdb: Remove OUTBUFMAX constant
powerpc64/bpf: Additional NVR handling for bpf_throw
powerpc64/bpf: Support exceptions
powerpc64/bpf: Add arch_bpf_stack_walk() for BPF JIT
powerpc64/bpf: Avoid tailcall restore from trampoline
powerpc64/bpf: Support tailcalls with subprogs
powerpc64/bpf: Moving tail_call_cnt to bottom of frame
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded
powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory
powerpc64/bpf: Inline bpf_get_smp_processor_id() and bpf_get_current_task/_btf()
powerpc64/bpf: Support internal-only MOV instruction to resolve per-CPU addrs
...

The commit 5b472b6e5bd9 ("x86_64/bug: Implement __WARN_printf()")
implemented __WARN_printf(), which changed the mechanism to use UD1
instead of UD2. However, it only handles the trap in the runtime IDT
handler, while the early booting IDT handler lacks this handling. As a
result, the usage of WARN() before the runtime IDT setup can lead to
kernel crashes. Since KMSAN is enabled after the runtime IDT setup, it
is safe to use handle_bug() directly in early_fixup_exception() to
address this issue.

Fixes: 5b472b6e5bd9 ("x86_64/bug: Implement __WARN_printf()")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/c4fb3645f60d3a78629d9870e8fcc8535281c24f.1768016713.git.houwenlong.hwl@antgroup.com

Pull spi fixes from Mark Brown:
"One final batch of fixes for the Tegra SPI drivers, the main one is a
batch of fixes for races with the interrupts in the Tegra210 QSPI
driver that Breno has been working on for a while"

* tag 'spi-fix-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra114: Preserve SPI mode bits in def_command1_reg
spi: tegra: Fix a memory leak in tegra_slink_probe()
spi: tegra210-quad: Protect curr_xfer check in IRQ handler
spi: tegra210-quad: Protect curr_xfer clearing in tegra_qspi_non_combined_seq_xfer
spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer
spi: tegra210-quad: Protect curr_xfer assignment in tegra_qspi_setup_transfer_one
spi: tegra210-quad: Move curr_xfer read inside spinlock
spi: tegra210-quad: Return IRQ_HANDLED when timeout already processed transfer

When a block read returns an invalid length, zero or >I2C_SMBUS_BLOCK_MAX,
the length handler sets the state to IMX_I2C_STATE_FAILED. However,
i2c_imx_master_isr() unconditionally overwrites this with
IMX_I2C_STATE_READ_CONTINUE, causing an endless read loop that overruns
buffers and crashes the system.

Guard the state transition to preserve error states set by the length
handler.

Fixes: 5f5c2d4579ca ("i2c: imx: prevent rescheduling in non dma mode")
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260116111906.3413346-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Pull fsverity fixes from Eric Biggers:

- Fix a build error on parisc

- Remove the non-large-folio-aware function fsverity_verify_page()

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: fix build error by adding fsverity_readahead() stub
fsverity: remove fsverity_verify_page()
f2fs: make f2fs_verify_cluster() partially large-folio-aware
f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster()

Since 3669ddd8fa8b5 ("KVM: arm64: Add a range to pkvm_mappings"),
pKVM tracks the memory that has been mapped into a guest in a
side data structure. Crucially, it uses it to find out whether
a page has already been mapped, and therefore refuses to map it
twice. So far, so good.

However, this very patch completely breaks non-4kB page support,
with guests being unable to boot. The most obvious symptom is that
we take the same fault repeatedly, and not making forward progress.
A quick investigation shows that this is because of the above
rejection code.

As it turns out, there are multiple issues at play:

- while the HPFAR_EL2 register gives you the faulting IPA minus
the bottom 12 bits, it will still give you the extra bits that
are part of the page offset for anything larger than 4kB,
even for a level-3 mapping

- pkvm_pgtable_stage2_map() assumes that the address passed as
a parameter is aligned to the size of the intended mapping

- the faulting address is only aligned for a non-page mapping

When the planets are suitably aligned (pun intended), the guest
faults on a page by accessing it past the bottom 4kB, and extra bits
get set in the HPFAR_EL2 register. If this results in a page mapping
(which is likely with large granule sizes), nothing aligns it further
down, and pkvm_mapping_iter_first() finds an intersection that
doesn't really exist. We assume this is a spurious fault and return
-EAGAIN. And again...

This doesn't hit outside of the protected code, as the page table
code always aligns the IPA down to a page boundary, hiding the issue
for everyone else.

Fix it by always forcing the alignment on vma_pagesize, irrespective
of the value of vma_pagesize.

Fixes: 3669ddd8fa8b5 ("KVM: arm64: Add a range to pkvm_mappings")
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://https://patch.msgid.link/20260222141000.3084258-1-maz@kernel.org
Cc: stable@vger.kernel.org

Pull locking fix from Ingo Molnar:
"Now that LLVM 22 has been released officially, require a release
version to use the new CONFIG_WARN_CONTEXT_ANALYSIS feature.

In particular this avoids the widely used Android clang 22.0.1
pre-release build which is known to be broken for this usecase"

* tag 'locking-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/Kconfig.debug: Require a release version of LLVM 22 for context analysis

Make sure that __perf_event_overflow() runs with IRQs disabled for all
possible callchains. Specifically the software events can end up running
it with only preemption disabled.

This opens up a race vs perf_event_exit_event() and friends that will go
and free various things the overflow path expects to be present, like
the BPF program.

Fixes: 592903cdcbf6 ("perf_counter: add an event_list")
Reported-by: Simond Hu <cmdhh1767@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Simond Hu <cmdhh1767@gmail.com>
Link: https://patch.msgid.link/20260224122909.GV1395416@noisy.programming.kicks-ass.net

The rseq registration validates that the rseq_size argument is greater
or equal to 32 (the original rseq size), but the comment associated with
this check does not clearly state this.

Clarify the comment to that effect.

Fixes: ee3e3ac05c26 ("rseq: Introduce extensible rseq ABI")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260220200642.1317826-2-mathieu.desnoyers@efficios.com

Pull parisc updates from Helge Deller:

- Fix device reference leak in error path

- Check if system provides a 64-bit free running platform counter

- Minor fixes in debug code

* tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: lba_pci: Add debug code to show IO and PA ranges
parisc: Detect 64-bit free running platform counter
parisc: Fix minor printk issues in iosapic debug code
parisc: Enhance debug code for PAT firmware
parisc: Add PDC PAT call to get free running 64-bit counter
parisc: Fix module path output in qemu tables
parisc: Export model name for MPE/ix
parisc: Prevent interrupts during reboot
parisc: Print hardware IDs as 4 digit hex strings
parisc: kernel: replace kfree() with put_device() in create_tree_node()

Building trusted-keys as a module fails modpost with:

ERROR: modpost: "plpks_wrapping_is_supported" [security/keys/trusted-keys/
trusted.ko] undefined!

Export plpks_wrapping_is_supported() so trusted-keys links cleanly

This patch is intended to be applied on top of the earlier "Extend "trusted
" keys to support a new trust source named the PowerVM Key Wrapping Module
(PKWM)" series (v5).
Link: https://lore.kernel.org/all/20260127145228.48320-1-ssrish@linux.ibm.com/

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010724.1g9hbLKv-lkp@intel.com/
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260201165344.950870-1-ssrish@linux.ibm.com

array_index_nospec() is no use if the result gets spilled to the stack, as
it makes the believed safe-under-speculation value subject to memory
predictions.

For all practical purposes, this means array_index_nospec() must be used in
the expression that accesses the array.

As the code currently stands, it's the wrong side of irqentry_enter(), and
'index' is put into %ebp across the function call.

Remove the index variable and reposition array_index_nospec(), so it's
calculated immediately before the array access.

Fixes: 14619d912b65 ("x86/fred: FRED entry/exit and dispatch code")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260106131504.679932-1-andrew.cooper3@citrix.com

Pull regulator fix from Mark Brown:
"One last fix for v6.19: the voltages for the SpaceMIT P1 were not
described correctly"

* tag 'regulator-fix-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: spacemit-p1: Fix n_voltages for BUCK and LDO regulators

The COMMAND1 register bits [29:28] set the SPI mode, which controls
the clock idle level. When a transfer ends, tegra_spi_transfer_end()
writes def_command1_reg back to restore the default state, but this
register value currently lacks the mode bits. This results in the
clock always being configured as idle low, breaking devices that
need it high.

Fix this by storing the mode bits in def_command1_reg during setup,
to prevent this field from always being cleared.

Fixes: f333a331adfa ("spi/tegra114: add spi driver")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20260204141212.1540382-1-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull crypto library fix from Eric Biggers:
"Fix a big endian specific issue in the PPC64-optimized AES code"

* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc/aes: Fix rndkey_from_vsx() on big endian CPUs

hppa-linux-gcc 9.5.0 generates a call to fsverity_readahead() in
f2fs_readahead() when CONFIG_FS_VERITY=n, because it fails to do the
expected dead code elimination based on vi always being NULL. Fix the
build error by adding an inline stub for fsverity_readahead(). Since
it's just for opportunistic readahead, just make it a no-op.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602180838.pwICdY2r-lkp@intel.com/
Fixes: 45dcb3ac9832 ("f2fs: consolidate fsverity_info lookup")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260218012244.18536-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)

The assigned type is "struct gic_kvm_info", but the returned type,
while matching, is const qualified. To get them exactly matching, just
use the dereferenced pointer for the sizeof().

Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20260206223022.it.052-kees@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>

Pull irqchip driver fixes from Ingo Molnar:

- Fix frozen interrupt bug in the sifive-plic driver

- Limit per-device MSI interrupts on uncommon gic-v3-its hardware
variants

- Address Sparse warning by constifying a variable in the MMP driver

- Revert broken commit and also fix an error check in the ls-extirq
driver

* tag 'irq-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ls-extirq: Fix devm_of_iomap() error check
Revert "irqchip/ls-extirq: Use for_each_of_imap_item iterator"
irqchip/mmp: Make icu_irq_chip variable static const
irqchip/gic-v3-its: Limit number of per-device MSIs to the range the ITS supports
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting

Using a prerelease version as a minimum supported version for
CONFIG_WARN_CONTEXT_ANALYSIS was reasonable to do while LLVM 22 was the
development version so that people could immediately build from main and
start testing and validating this in their own code. However, it can be
problematic when using prerelease versions of LLVM 22, such as Android
clang 22.0.1 (the current android mainline compiler) or when bisecting
LLVM between llvmorg-22-init and llvmorg-23-init, to build the kernel,
as all compiler fixes for the context analysis may not be present,
potentially resulting in warnings that can easily turn into errors.

Now that LLVM 22 is released as 22.1.0, upgrade the check to require at
least this version to ensure that a user's toolchain actually has all
the changes needed for a smooth experience with context analysis.

Fixes: 3269701cb256 ("compiler-context-analysis: Add infrastructure for Context Analysis with Clang")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260224-bump-clang-ver-context-analysis-v1-1-16cc7a90a040@kernel.org

Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.

The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).

In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().

If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.

Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer.

Closes: https://lore.kernel.org/oe-kbuild-all/202602020208.m7KIjdzW-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Haocheng Yu <yuhaocheng035@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260202162057.7237-1-yuhaocheng035@gmail.com

Kernel test robot reported that
tools/testing/selftests/kvm/hardware_disable_test was failing due to
commit 704069649b5b ("sched/core: Rework sched_class::wakeup_preempt()
and rq_modified_*()")

It turns out there were two related problems that could lead to a
missed preemption:

- when hitting newidle balance from the idle thread, it would elevate
rb->next_class from &idle_sched_class to &fair_sched_class, causing
later wakeup_preempt() calls to not hit the sched_class_above()
case, and not issue resched_curr().

Notably, this modification pattern should only lower the
next_class, and never raise it. Create two new helper functions to
wrap this.

- when doing schedule_idle(), it was possible to miss (re)setting
rq->next_class to &idle_sched_class, leading to the very same
problem.

Cc: Sean Christopherson <seanjc@google.com>
Fixes: 704069649b5b ("sched/core: Rework sched_class::wakeup_preempt() and rq_modified_*()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202602122157.4e861298-lkp@intel.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260218163329.GQ1395416@noisy.programming.kicks-ass.net

Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:

- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.

- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.

- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6

- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores

- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.

As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.

Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.

A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:

- Three server boards use 32-bit ASpeed BMCs

- One more reference board for 32-bit Microchip LAN9668

- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s

- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588

- Two mobile phones using Snapdragon 845

- A gaming device and a NAS box, both based on Rockchips rk356x

On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"

* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...

Add more code to debug the PAT PDC firmware.

Signed-off-by: Helge Deller <deller@gmx.de>

Update Documentation/security/keys/trusted-encrypted.rst and Documentation/
admin-guide/kernel-parameters.txt with PowerVM Key Wrapping Module (PKWM)
as a new trust source

Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-7-ssrish@linux.ibm.com

Pull binder fixes from Greg KH:
"Here are some small, last-minute binder C and Rust driver fixes for
reported issues. They include a number of fixes for reported crashes
and other problems.

All of these have been in linux-next this week, and longer"

* tag 'char-misc-6.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binderfs: fix ida_alloc_max() upper bound
rust_binderfs: fix ida_alloc_max() upper bound
binder: fix BR_FROZEN_REPLY error log
rust_binder: add additional alignment checks
binder: fix UAF in binder_netlink_report()
rust_binder: correctly handle FDA objects of length zero

Higher voltage settings were unusable due to incorrect n_voltages values
causing registration failures. For example, setting aldo4 to 3.3V failed
with -EINVAL because the required selector (123) exceeded the allowed
range (n_voltages=117).

Fix by aligning n_voltages with the hardware register widths per the P1
datasheet [1]:
- BUCK: 255 (was 254), allows selectors 0-254, selector 255 is reserved
- LDO: 128 (was 117), allows selectors 0-127, selectors 0-10 are for
suspend mode, valid operational range is 11-127

This enables the full voltage range supported by the hardware.

Fixes: 8b84d712ad84 ("regulator: spacemit: support SpacemiT P1 regulators")
Link: https://developer.spacemit.com/documentation [1]
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://patch.msgid.link/20260122-spacemit-p1-v1-1-309be27fbff9@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>

In tegra_slink_probe(), when platform_get_irq() fails, it directly
returns from the function with an error code, which causes a memory leak.

Replace it with a goto label to ensure proper cleanup.

Fixes: eb9913b511f1 ("spi: tegra: Fix missing IRQ check in tegra_slink_probe()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260202-slink-v1-1-eac50433a6f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull SCSI fixes from James Bottomley:
"Small changes in drivers only, no core changes.

The firewire one fixes a user controlled overflow (but I still can't
see how it could be exploited)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: amd-versal2: Fix PHY initialization in HCE enable notify
scsi: firewire: sbp-target: Fix overflow in sbp_make_tpg()
scsi: be2iscsi: Fix a memory leak in beiscsi_boot_get_sinfo()
scsi: qla2xxx: edif: Fix dma_free_coherent() size

Stephen retired and stepped back from -next maintainership, update his
entry in CREDITS to recognise his 18 years of hard work making it what
it is today and all the impact it's had on our development process.

Also update to his current GnuPG key while we're here.

Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I finally got a big endian PPC64 kernel to boot in QEMU. The PPC64 VSX
optimized AES library code does work in that case, with the exception of
rndkey_from_vsx() which doesn't take into account that the order in
which the VSX code stores the round key words depends on the endianness.
So fix rndkey_from_vsx() to do the right thing on big endian CPUs.

Fixes: 7cf2082e74ce ("lib/crypto: powerpc/aes: Migrate POWER8 optimized code into library")
Link: https://lore.kernel.org/r/20260216022104.332991-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

Now that fsverity_verify_page() has no callers, remove it.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260218010630.7407-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

The `sve_state` pointer in `hyp_vcpu->vcpu.arch` is initialized as a
hypervisor virtual address during vCPU initialization in
`pkvm_vcpu_init_sve()`.

`unpin_host_sve_state()` calls `kern_hyp_va()` on this address. Since
`kern_hyp_va()` is idempotent, it's not a bug. However, it is
unnecessary and potentially confusing. Remove the redundant conversion.

Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260213143815.1732675-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>

Pull SCSI fixes from James Bottomley:
"All changes in drivers (well technically SES is enclosure services,
but its change is minor). The biggest is the write combining change in
lpfc followed by the additional NULL checks in mpi3mr"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix shift out of bounds when MAXQ=32
scsi: ufs: core: Move link recovery for hibern8 exit failure to wl_resume
scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace()
scsi: snic: MAINTAINERS: Update snic maintainers
scsi: snic: Remove unused linkstatus
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
scsi: mpi3mr: Add NULL checks when resetting request and reply queues
scsi: ufs: core: Reset urgent_bkops_lvl to allow runtime PM power mode
scsi: ses: Fix devices attaching to different hosts
scsi: ufs: core: Fix RPMB region size detection for UFS 2.2
scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT
scsi: lpfc: Properly set WC for DPP mapping

The devm_of_iomap() function returns an ERR_PTR() encoded error code on
failure. Replace the incorrect check against NULL with IS_ERR().

Fixes: 05cd654829dd ("irqchip/ls-extirq: Convert to a platform driver to make it work again")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20260224113610.1129022-3-ioana.ciornei@nxp.com
Closes: https://lore.kernel.org/all/aYXvfbfT6w0TMsXS@stanley.mountain/

IMC on SPR and EMR does not support sub-channels. In contrast, CPUs
that use gnr_uncores[] (e.g. Granite Rapids and Sierra Forest)
implement two command schedulers (SCH0/SCH1) per memory channel,
providing logically independent command and data paths.

Do not reuse the spr_uncore_imc[] configuration for these CPUs.
Instead, introduce a dedicated gnr_uncore_imc[] with per-scheduler
events, so userspace can monitor SCH0 and SCH1 independently.

On these CPUs, replace cas_count_{read,write} with
cas_count_{read,write}_sch{0,1}. This may break existing userspace
that relies on cas_count_{read,write}, prompting it to switch to the
per-scheduler events, as the legacy event reports only partial
traffic (SCH0).

Fixes: 632c4bf6d007 ("perf/x86/intel/uncore: Support Granite Rapids")
Fixes: cb4a6ccf3583 ("perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge")
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260210005225.20311-1-zide.chen@intel.com

objtool warns about this function being called inside of a uaccess
section:

kernel/entry/common.o: warning: objtool: irqentry_exit+0x1dc: call to rseq_arm_slice_extension_timer() with UACCESS enabled

Interestingly, this happens with CONFIG_RSEQ_SLICE_EXTENSION disabled,
so this is an empty function, as the normal implementation is
already marked __always_inline.

I could reproduce this multiple times with gcc-11 but not with gcc-15,
so the compiler probably got better at identifying the trivial function.

Mark all the empty helpers for !RSEQ_SLICE_EXTENSION as __always_inline
for consistency, avoiding this warning.

Fixes: 0ac3b5c3dc45 ("rseq: Implement time slice extension enforcement timer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260206074122.709580-1-arnd@kernel.org