Currently need_futex_hash_allocate_default() depends on strict pthread
semantics, abusing CLONE_THREAD. This breaks the non-concurrency
assumptions when doing the mm->futex_ref pcpu allocations, leading to
bugs[0] when sharing the mm in other ways; ie:

BUG: KASAN: slab-use-after-free in futex_hash_put

... where the +1 bias can end up on a percpu counter that mm->futex_ref
no longer points at.

Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding
vfork keeps the existing paths untouched (no overhead), and we can't
race in the first place: either the parent is suspended and the child
runs alone, or mm->futex_ref is already allocated from an earlier
CLONE_VM.

Link: https://lore.kernel.org/all/CAL_bE8LsmCQ-FAtYDuwbJhOkt9p2wwYQwAbMh=PifC=VsiBM6A@mail.gmail.com/ [0]
Fixes: d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull s390 fixes from Alexander Gordeev:

- Reject zero-length writes from userspace that corrupt Debug Facility
buffers

- Replace one s390 PCI maintainer

- Remove SCLP_OFB Kconfig option and enable the guarded code
unconditionally

- Replace incorrect use of phys_to_folio() to virt_to_folio() in
do_secure_storage_access()

* tag 's390-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix phys_to_folio() usage in do_secure_storage_access()
s390/sclp: Remove SCLP_OFB Kconfig option
MAINTAINERS: Replace one of the maintainers for s390/pci
s390/debug: Reject zero-length input in debug_input_flush_fn()
s390/debug: Reject zero-length input before trimming a newline

Pull smb server fixes from Steve French:

- Fix shutdown (stop sessions)

- Fix readdir unsupported info level

* tag 'v7.1-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: rewrite stop_sessions() with restartable iteration
smb: server: handle readdir_info_level_struct_sz() error

In case of a Secure-Storage-Access exception the effective aka virtual
address which caused the exception is contained within the TEID.

do_secure_storage_access() incorrectly uses phys_to_folio() instead of
virt_to_folio() to translate the virtual address to the corresponding
folio.

Fix this by using virt_to_folio() instead of phys_to_folio().

Fixes: 084ea4d611a3 ("s390/mm: add (non)secure page access exceptions handlers")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Pull block fixes from Jens Axboe:

- MD pull request via Yu:
- Fix a raid5 UAF on IO across the reshape position
- Avoid failing RAID1/RAID10 devices for invalid IO errors
- Fix RAID10 divide-by-zero when far_copies is zero
- Restore bitmap grow through sysfs
- Use mddev_is_dm() instead of open-coding gendisk checks
- Use ATTRIBUTE_GROUPS() for md default sysfs attributes
- Replace open-coded wait loops with wait_event helpers

- NVMe pull request via Keith:
- Target data transfer size configuation (Aurelien)
- Enable P2P for RDMA (Shivaji Kant)
- TCP target updates (Maurizio, Alistair, Chaitanya, Shivam Kumar)
- TCP host updates (Alistair, Chaitanya)
- Authentication updates (Alistair, Daniel, Chris Leech)
- Multipath fixes (John Garry)
- New quirks (Alan Cui, Tao Jiang)
- Apple driver fix (Fedor Pchelkin)
- PCI admin doorbell update fix (Keith)

- Properly propagate CDROM read-only state to the block layer

* tag 'block-7.1-20260430' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (35 commits)
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes
md: use mddev_is_dm() instead of open-coding gendisk checks
md/raid1: replace wait loop with wait_event_idle() in raid1_write_request()
md/md-bitmap: add a none backend for bitmap grow
md/md-bitmap: split bitmap sysfs groups
md: factor bitmap creation away from sysfs handling
md: use mddev_lock_nointr() in mddev_suspend_and_lock_nointr()
md: replace wait loop with wait_event() in md_handle_request()
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
md/raid1,raid10: don't fail devices for invalid IO errors
MAINTAINERS: Add Xiao Ni as md/raid reviewer
md/raid5: Fix UAF on IO across the reshape position
cdrom, scsi: sr: propagate read-only status to block layer via set_disk_ro()
nvme-auth: Hash DH shared secret to create session key
nvme-pci: fix missed admin queue sq doorbell write
nvme-auth: Include SC_C in RVAL controller hash
nvme-tcp: teardown circular locking fixes
nvmet-tcp: Don't clear tls_key when freeing sq
Revert "nvmet-tcp: Don't free SQ on authentication success"
nvme: skip trace completion for host path errors
...

stop_sessions() walks conn_list with hash_for_each() and, for every
entry, drops conn_list_lock across the transport ->shutdown() call
before re-acquiring the read lock to continue the loop. The hash
walk relies on cross-iteration state (the current bucket and the
hlist position), which is not preserved across unlock/relock: if
another thread performs a list mutation during the unlocked window,
the ongoing iteration becomes unreliable and can re-visit
connections that have already been handled or skip connections that
have not. The outer `if (!hash_empty(conn_list)) goto again;` retry
masks the symptom in the common case but does not address the
unsafe iteration itself.

Reframe the loop so it never relies on iterator state across
unlock/relock. Under conn_list_lock held for read, pick the first
connection whose ->shutdown() has not yet been issued by this path,
pin it by taking an extra reference, record that fact on the
connection and mark it EXITING while still inside the locked walk,
then drop the lock. Then call ->shutdown() outside the lock, drop
the pin (freeing the connection if the handler already released its
reference), and restart from the top.

Use a new per-connection flag, conn->stop_called, as the "shutdown
issued from stop_sessions()" marker rather than reusing the status
state. ksmbd_conn_set_exiting() is also invoked by
ksmbd_sessions_deregister() on sibling channels of a multichannel
session without issuing a transport shutdown, so treating
KSMBD_SESS_EXITING as "already handled here" would skip connections
that still need shutdown() to wake their handler out of recv(),
leaving the outer retry waiting indefinitely for the hash to drain.
stop_sessions() is serialised by init_lock in
ksmbd_conn_transport_destroy(), so writing stop_called under the
read lock has no other writer.

Set EXITING inside the locked walk so the selection, the stop_called
marker, and the status transition all happen together, and guard
against regressing a connection that has already advanced to
KSMBD_SESS_RELEASING on its own (for example, if the handler exited
its receive loop for an unrelated reason between teardown steps).

When the pin drop is the last put, release the transport and pair
ida_destroy(&target->async_ida) with the ida_init() done in
ksmbd_conn_alloc(), so stop_sessions() retiring a connection on its
own does not leak the xarray backing of the embedded async_ida.

The outer retry with msleep() is kept to wait for handler threads to
reach ksmbd_conn_free() and drain the hash.

Observed with an instrumented build that logs one line per visit and
widens the unlocked window before ->shutdown() by 200 ms, under
five concurrent cifs mounts (nosharesock, one connection each):

* Current code: the same connection address is revisited many
times during a single stop_sessions() call and ->shutdown() is
invoked well beyond the number of live connections before the
hash finally drains.

* Rewritten code: each live connection produces exactly one
->shutdown() call; the function returns as soon as the hash is
empty.

Functional teardown via `ksmbd.control --shutdown` with the same
five mounts completes cleanly on the rewritten path.

Performance is observably unchanged. Tearing down N concurrent
nosharesock cifs connections with `ksmbd.control --shutdown` +
`rmmod ksmbd` takes essentially the same wall time before and after
the rewrite:

N before after
10 4.93s 5.34s
30 7.34s 7.03s
50 7.31s 7.01s (3-run avg: 7.04s vs 7.25s)
100 6.98s 6.78s
200 6.77s 6.89s

and the number of ->shutdown() calls equals the number of live
connections on both paths when the race is not widened. The
teardown is dominated by the msleep(100)-based outer retry waiting
for handler threads to run ksmbd_conn_free(), not by the iteration
itself; the restartable loop's worst-case O(N^2) visit cost is in
the microseconds even at N=200 and sits far below the msleep(100)
granularity.

Applied alone on top of ksmbd-for-next-next, this patch does not
introduce a new leak site. Under the same reproducer (10x
concurrent-holders + ss -K + ksmbd.control --shutdown + rmmod), the
tree still shows the pre-existing per-connection transport leak
count that arises when the last refcount drop lands in one of
ksmbd_conn_r_count_dec(), __free_opinfo() or session_fd_check() -
all of which end with a bare kfree() today. kmemleak backtraces
for the unreferenced objects point into the TCP accept path
(sk_clone -> inet_csk_clone_lock, sock_alloc_inode) and none
involve stop_sessions(). Plugging those bare-kfree sites is the
responsibility of the follow-up patch.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Remove the SCLP_OFB Kconfig option and enable the guarded code
unconditionally. This guards only a few lines of code, so the impact is
very low while at the same time this reduces the large number of Kconfig
options.

Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Pull io_uring fixes from Jens Axboe:

- Remove dead struct io_buffer_list member

- Fix for incrementally consumed buffers with recvmsg multishot, which
requires a minimum value left in a buffer for any receive for the
headers. If there's still a bit of buffer left but it's smaller than
that value, then userspace will see a spurious -EFAULT returned in
the CQE

- Locking fix for the DEFER_TASKRUN retry list, which otherwise could
race with fallback cancelations. If the task is exiting with
task_work left in both the normal and retry list AND the exit cleanup
races with the task running task work, then entries could either be
doubly completed or lost

- Cap NAPI busy poll timeout to something sane, to avoid syzbot running
into excessive polling and triggering warnings around that

* tag 'io_uring-7.1-20260430' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/tw: serialize ctx->retry_llist with ->uring_lock
io_uring/napi: cap busy_poll_to 10 msec
io_uring/kbuf: support min length left for incremental buffers
io_uring/kbuf: kill dead struct io_buffer_list 'nr_entries' member

Pull MD fixes from Yu Kuai:

"Bug Fixes:
- Fix a raid5 UAF on IO across the reshape position.
- Avoid failing RAID1/RAID10 devices for invalid IO errors.
- Fix RAID10 divide-by-zero when far_copies is zero.
- Restore bitmap grow through sysfs.

Cleanups:
- Use mddev_is_dm() instead of open-coding gendisk checks.
- Use ATTRIBUTE_GROUPS() for md default sysfs attributes.
- Replace open-coded wait loops with wait_event helpers."

* tag 'md-7.1-20260428' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes
md: use mddev_is_dm() instead of open-coding gendisk checks
md/raid1: replace wait loop with wait_event_idle() in raid1_write_request()
md/md-bitmap: add a none backend for bitmap grow
md/md-bitmap: split bitmap sysfs groups
md: factor bitmap creation away from sysfs handling
md: use mddev_lock_nointr() in mddev_suspend_and_lock_nointr()
md: replace wait loop with wait_event() in md_handle_request()
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
md/raid1,raid10: don't fail devices for invalid IO errors
MAINTAINERS: Add Xiao Ni as md/raid reviewer
md/raid5: Fix UAF on IO across the reshape position

early exit in smb2_populate_readdir_entry() if the requested info_level
is unknown.

Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Add myself as co-maintainer for s390/pci, replacing Gerald Schaefer who
has moved his focus to s390/mm. Thank you Gerald!

Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Pull spi fixes from Mark Brown:
"There are a couple of nasty issues fixed here in the axiado and
rockchip drivers. We've also got more of the fixes from Johan here,
this time for the two Cadence drivers, plus a couple of other similar
fixes from John and Felix"

* tag 'spi-fix-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: amlogic-spisg: initialize completion before requesting IRQ
spi: axiado: replace usleep_range() with udelay() in IRQ path
spi: cadence-quadspi: fix runtime pm and clock imbalance on unbind
spi: cadence-quadspi: fix unclocked access on unbind
spi: cadence-quadspi: fix clock imbalance on probe failure
spi: cadence-quadspi: fix runtime pm disable imbalance on probe failure
spi: cadence: fix clock imbalance on probe failure
spi: cadence: fix unclocked access on unbind
spi: rockchip: Drop unused and broken CR0 macros
spi: rockchip: Read ISR, not IMR, to detect cs-inactive IRQ
spi: rzv2h-rspi: Fix silent failure in clock setup error path

The DEFER_TASKRUN local task work paths all run under ctx->uring_lock,
which serializes them with each other and with the rest of the ring's
hot paths. io_move_task_work_from_local() is the exception - it's called
from io_ring_exit_work() on a kworker without holding the lock and from
the iopoll cancelation side right after dropping it.

->work_llist is fine with this, as it's only ever updated via the
expected paths. But the ->retry_llist is updated while runing, and hence
it could potentially race between normal task_work running and the
task-has-exited shutdown path.

Simply grab ->uring_lock while moving the local work to the fallback
list for exit purposes, which nicely serializes it across both the
normal additions and the exit prune path.

Cc: stable@vger.kernel.org
Fixes: f46b9cdb22f7 ("io_uring: limit local tw done")
Reported-by: Robert Femmer <robert.femmer@x41-dsec.de>
Reported-by: Christian Reitter <invd@inhq.net>
Reported-by: Michael Rodler <michael.rodler@x41-dsec.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The cdrom core never calls set_disk_ro() for a registered device, so
BLKROGET on a CD-ROM device always returns 0 (writable), even when the
drive has no write capabilities and writes will inevitably fail. This
causes problems for userspace that relies on BLKROGET to determine
whether a block device is read-only. For example, systemd's loop device
setup uses BLKROGET to decide whether to create a loop device with
LO_FLAGS_READ_ONLY. Without the read-only flag, writes pass through the
loop device to the CD-ROM and fail with I/O errors. systemd-fsck
similarly checks BLKROGET to decide whether to run fsck in no-repair
mode (-n).

The write-capability bits in cdi->mask come from two different sources:
CDC_DVD_RAM and CDC_CD_RW are populated by the driver from the MODE
SENSE capabilities page (page 0x2A) before register_cdrom() is called,
while CDC_MRW_W and CDC_RAM require the MMC GET CONFIGURATION command
and were only probed by cdrom_open_write() at device open time. This
meant that any attempt to compute the writable state from the full
mask at probe time was incorrect, because the GET CONFIGURATION bits
were still unset (and cdi->mask is initialized such that capabilities
are assumed present).

Fix this by factoring the GET CONFIGURATION probing out of
cdrom_open_write() into a new exported helper,
cdrom_probe_write_features(), and having sr call it from sr_probe()
right after get_capabilities() has populated the MODE SENSE bits.
register_cdrom() then calls set_disk_ro() based on the full
write-capability mask (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)
so the block layer reflects the drive's actual write support. The
feature queries used (CDF_MRW and CDF_RWRT via GET CONFIGURATION with
RT=00) report drive-level capabilities that are persistent across
media, so a single probe before register_cdrom() is sufficient and the
redundant probe at open time is dropped.

With set_disk_ro() now accurate, the long-vestigial cd->writeable flag
in sr can go: get_capabilities() used to set cd->writeable based on
the same four mask bits, but because CDC_MRW_W and CDC_RAM default to
"capability present" in cdi->mask and aren't touched by MODE SENSE,
the condition that gated cd->writeable was always true, making it
unconditionally 1. Replace the corresponding gate in sr_init_command()
with get_disk_ro(cd->disk), which turns a previously no-op check into
a real one and also catches kernel-internal bio writers that bypass
blkdev_write_iter()'s bdev_read_only() check.

The sd driver (SCSI disks) does not have this problem because it
checks the MODE SENSE Write Protect bit and calls set_disk_ro()
accordingly. The sr driver cannot use the same approach because the
MMC specification does not define the WP bit in the MODE SENSE
device-specific parameter byte for CD-ROM devices.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Daan De Meyer <daan@amutable.com>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://patch.msgid.link/20260427210139.1400-2-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Replace the md_default_group and md_attr_groups with
ATTRIBUTE_GROUPS().

Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://lore.kernel.org/linux-raid/20260423101303.48196-4-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>

debug_input_flush_fn() always copies one byte from the userspace buffer
with copy_from_user() regardless of the supplied write length. A
zero-length write therefore reads one byte beyond the caller's buffer.
If the stale byte happens to be '-' or a digit the debug log is
silently flushed. With an unmapped buffer the call returns -EFAULT.

Reject zero-length writes before copying from userspace.

Cc: stable@vger.kernel.org # v5.10+
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Pull regulator fix from Mark Brown:
"A fix from Arnd re-adding a dependency on gpiolib which was implicitly
pulled in via an OF specific route which got removed as part of a
cleanup"

* tag 'regulator-fix-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rpi-panel-attiny: add back GPIOLIB dependency

Several fixes from Johan for issues with unbind and error handling in
probe.

Currently there's no cap on the maximum amount of time that napi is
allowed to poll if no events are found, which can lead to kernel
complaints on a task being stuck as there's no conditional rescheduling
done within that loop.

Just cap it to 10 msec in total, that's already way above any kind of
sane value that will reap any benefits, yet low enough that it's
nowhere near being able to trigger preemption complaints.

Fixes: 8d0c12a80cde ("io-uring: add napi busy poll support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Keith:

"- Target data transfer size confiruation (Aurelien)
- Enable P2P for RDMA (Shivaji Kant)
- TCP target updates (Maurizio, Alistair, Chaitanya, Shivam Kumar)
- TCP host updates (Alistair, Chaitanya)
- Authentication updates (Alistair, Daniel, Chris Leech)
- Multipath fixes (John Garry)
- New quirks (Alan Cui, Tao Jiang)
- Apple driver fix (Fedor Pchelkin)
- PCI admin doorbell update fix (Keith)"

* tag 'nvme-7.1-2026-04-24' of git://git.infradead.org/nvme: (22 commits)
nvme-auth: Hash DH shared secret to create session key
nvme-pci: fix missed admin queue sq doorbell write
nvme-auth: Include SC_C in RVAL controller hash
nvme-tcp: teardown circular locking fixes
nvmet-tcp: Don't clear tls_key when freeing sq
Revert "nvmet-tcp: Don't free SQ on authentication success"
nvme: skip trace completion for host path errors
nvme-pci: add quirk for Memblaze Pblaze5 (0x1c5f:0x0555)
nvme-multipath: put module reference when delayed removal work is canceled
nvme: expose TLS mode
nvme-apple: drop invalid put of admin queue reference count
nvme-core: fix parameter name in comment
nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free
nvme-multipath: drop head pointer check in nvme_mpath_clear_current_path()
nvme: add quirk NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808 (Samsung PM981/983/970 EVO Plus )
nvmet-tcp: fix race between ICReq handling and queue teardown
nvmet-tcp: remove redundant calls to nvmet_tcp_fatal_error()
nvmet-tcp: propagate nvmet_tcp_build_pdu_iovec() errors to its callers
nvme: enable PCI P2PDMA support for RDMA transport
nvmet: introduce new mdts configuration entry
...

Replace direct checks on mddev->gendisk with mddev_is_dm() in
md_handle_request() and md_run().

Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://lore.kernel.org/linux-raid/20260423101303.48196-3-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>

Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED

debug_get_user_string() duplicates the userspace buffer with
memdup_user_nul() and then unconditionally looks at buffer[user_len - 1]
to strip a trailing newline.

A zero-length write reaches this helper unchanged, so the newline trim
reads before the start of the allocated buffer.

Reject empty writes before accessing the last input byte.

Fixes: 66a464dbc8e0 ("[PATCH] s390: debug feature changes")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20260417073530.96002-1-pengpeng@iscas.ac.cn
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Pull regmap fix from Mark Brown:
"A fix from Colin for a spelling mistake in a dev_warn() message"

* tag 'regmap-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Fix spelling mistake "undeferable" -> "undeferrable"

This driver provides a gpio chip, which is only possible when GPIOLIB
is enabled, which was previously guaranteed by the CONFIG_OF_GPIO
dependency that is now gone:

ERROR: modpost: "gpiochip_get_data" [drivers/regulator/rpi-panel-attiny-regulator.ko] undefined!
ERROR: modpost: "devm_gpiochip_add_data_with_key" [drivers/regulator/rpi-panel-attiny-regulator.ko] undefined!

Add an explicit GPIOLIB dependency instead.

Fixes: bf017304fce1 ("regulator: drop unneeded dependencies on OF_GPIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260429135812.112514-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Several fixes from Johan for probe failure and unbind issues in the
cadence-quadspi driver.

Make sure that the controller is active before disabling clocks on probe
failure to avoid unbalanced clock disable.

Also drop the usage count before returning (so that the controller can
be suspended after a probe deferral) and restore the autosuspend
setting.

Fixes: d36ccd9f7ea4 ("spi: cadence: Runtime pm adaptation")
Cc: stable@vger.kernel.org # 4.7
Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421123615.1533617-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Incrementally consumed buffer rings are generally fully consumed, but
it's quite possible that the application has a minimum size it needs to
meet to avoid truncation. Currently that minimum limit is 1 byte, but
this should be a setting that is the hands of the application. For
recvmsg multishot, a prime use case for incrementally consumed buffers,
the application may get spurious -EFAULT returned at the end of an
incrementally consumed buffer, as less space is available than the
headers need.

Grab a u32 field in struct io_uring_buf_reg, which the application can
use to inform the kernel of the minimum size that should be available
in an incrementally consumed buffer. If less than that is available,
the current buffer is fully processed and the next one will be picked.

Cc: stable@vger.kernel.org
Fixes: ae98dbf43d75 ("io_uring/kbuf: add support for incremental buffer consumption")
Link: https://github.com/axboe/liburing/issues/1433
Signed-off-by: Martin Michaelis <code@mgjm.de>
[axboe: write commit message, change io_buffer_list member name]
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The NVMe Base Specification 8.3.5.5.9 states that the session key Ks
shall be computed from the ephemeral DH key by applying the hash
function selected by the HashID parameter.

The current implementation stores the raw DH shared secret as the
session key without hashing it. This causes redundant hash operations:

1. Augmented challenge computation (section 8.3.5.5.4) requires
Ca = HMAC(H(g^xy mod p), C). The code compensates by hashing the
unhashed session key in nvme_auth_augmented_challenge() to produce
the correct result.

2. PSK generation (section 8.3.5.5.9) requires PSK = HMAC(Ks, C1 || C2)
where Ks should already be H(g^xy mod p). As the DH shared secret
is always larger than the HMAC block size, HMAC internally hashes
it before use, accidentally producing the correct result.

When using secure channel concatenation with bidirectional
authentication, this results in hashing the DH value three times: twice
for augmented challenge calculations and once during PSK generation.

Fix this by:
- Modifying nvme_auth_gen_shared_secret() to hash the DH shared secret
once after computation: Ks = H(g^xy mod p)
- Removing the hash operation from nvme_auth_augmented_challenge()
as the session key is now already hashed
- Updating session key buffer size from DH key size to hash output size
- Adding specification references in comments

This avoid storing the raw DH shared secret and reduces the number of
hash operations from three to one when using secure channel
concatenation.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

The wait loop is equivalent to wait_event_idle(); use it to improve
readability.

Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://lore.kernel.org/linux-raid/20260423101303.48196-2-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>

Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:

- Drop class_create() for the 'tsm' class"

* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct

On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.

Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.

Fixes: 672299736af6 ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Pull MM fixes from Andrew Morton:
"20 hotfixes. All are for MM (and for MMish maintainers). 9 are
cc:stable and the remainder are for post-7.0 issues or aren't deemed
suitable for backporting.

There are two DAMON series from SeongJae Park which address races
which could lead to use-after-free errors, and avoid the possibility
of presenting stale parameter values to users"

* tag 'mm-hotfixes-stable-2026-04-30-15-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memcontrol: fix rcu unbalance in get_non_dying_memcg_end()
mm/userfaultfd: detect VMA type change after copy retry in mfill_copy_folio_retry()
MAINTAINERS: remove stale kdump project URL
mm/damon/stat: detect and use fresh enabled value
mm/damon/lru_sort: detect and use fresh enabled and kdamond_pid values
mm/damon/reclaim: detect and use fresh enabled and kdamond_pid values
selftests/mm: specify requirement for PROC_MEM_ALWAYS_FORCE=y
mm/damon/sysfs-schemes: protect path kfree() with damon_sysfs_lock
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
MAINTAINERS: update Li Wang's email address
MAINTAINERS, mailmap: update email address for Qi Zheng
MAINTAINERS: update Liam's email address
mm/hugetlb_cma: round up per_node before logging it
MAINTAINERS: fix regex pattern in CORE MM category
mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap()
mm: start background writeback based on per-wb threshold for strictlimit BDIs
kho: fix error handling in kho_add_subtree()
liveupdate: fix return value on session allocation failure
mailmap: update entry for Dan Carpenter
vmalloc: fix buffer overflow in vrealloc_node_align()

There is a spelling mistake in a dev_warn message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260424112425.32129-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Move init_completion(&spisg->completion) to before devm_request_irq()
to avoid a potential race condition where an interrupt could fire
before the completion structure is initialized.

Fixes: cef9991e04ae ("spi: Add Amlogic SPISG driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260428-amlogic-spisg-v1-1-8eecc3b446d6@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Make sure to balance the runtime PM usage count before returning on
probe failure (to allow the controller to suspend after a probe
deferral) and to only drop the usage count on driver unbind to avoid a
clock disable imbalance.

Also restore the autosuspend setting.

Fixes: 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support")
Cc: stable@vger.kernel.org # 6.7
Cc: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421125354.1534871-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid unclocked register access and unbalanced
clock disable.

Also restore the autosuspend setting.

This issue was flagged by Sashiko when reviewing a controller
deregistration fix.

Fixes: d36ccd9f7ea4 ("spi: cadence: Runtime pm adaptation")
Cc: stable@vger.kernel.org # 4.7
Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://sashiko.dev/#/patchset/20260414134319.978196-1-johan%40kernel.org?part=1
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421123615.1533617-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

This is only ever assigned, never used. The only used part is the
calculated mask, which is used for indexing. Kill 'nr_entries'.

Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We can batch admin commands submitted through io_uring_cmd passthrough,
which means bd->last may be false and skips the doorbell write to
aggregate multiple commands per write. If a subsequent command can't be
dispatched for whatever reason, we have to provide the blk-mq ops'
commit_rqs callback in order to ensure we properly update the doorbell.

Fixes: 58e5bdeb9c2b ("nvme: enable uring-passthrough for admin commands")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Add a real none bitmap backend that exposes the common bitmap sysfs
group and use it to keep bitmap/location available when an array has no
bitmap.

Then switch the bitmap location sysfs path to move only between none
and the classic bitmap backend, using the no-sysfs bitmap helpers while
merging or unmerging the internal bitmap sysfs group.

This restores mdadm --grow bitmap addition through bitmap/location.

Fixes: fb8cc3b0d9db ("md/md-bitmap: delay registration of bitmap_ops until creating bitmap")
Reviewed-by: Su Yue <glass.su@suse.com>
Link: https://lore.kernel.org/r/20260425024615.1696892-4-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>

Pull Kbuild fixes from Nicolas Schier:

- builddeb - avoid recompiles for non-cross-compiles

Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds

- Never respect CONFIG_WERROR / W=e to fixdep

Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep

* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles

The class_create() call has been deprecated in favor of class_register()
as the driver core now allows for a struct class to be in read-only
memory. Change tsm_class to be a const struct class and drop the
class_create() call. Compile tested only.

Link: https://lore.kernel.org/all/2023040244-duffel-pushpin-f738@gregkh/

Changes with v1:
- Removed redundant int err variable.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20260306183325.245254-1-jkoolstra@xs4all.nl
Signed-off-by: Dan Williams <djbw@kernel.org>

* clk-samsung:
clk: samsung: exynos850: Add APM-to-AP mailbox clock
dt-bindings: clock: exynos850: Add APM_AP MAILBOX clock
clk: samsung: Use %pe format to simplify
clk: samsung: pll: Fix possible truncation in a9fraco recalc rate
clk: samsung: exynosautov920: add block G3D clock support
dt-bindings: clock: exynosautov920: add G3D clock definitions
clk: samsung: gs101: harmonise symbol names (clock arrays)
clk: samsung: artpec-9: Add initial clock support for ARTPEC-9 SoC
clk: samsung: Add clock PLL support for ARTPEC-9 SoC
dt-bindings: clock: Add ARTPEC-9 clock controller

* clk-qcom: (67 commits)
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ8074
clk: qcom: ipq-cmn-pll: Add IPQ6018 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ6018
clk: qcom: gdsc: Fix error path on registration of multiple pm subdomains
dt-bindings: clock: qcom: Add missing power-domains property
clk: qcom: gcc-eliza: Enable FORCE_MEM_CORE_ON for UFS AXI PHY clock
clk: qcom: dispcc-sc7180: Add missing MDSS resets
...

* clk-round:
clk: divider: remove divider_round_rate() and divider_round_rate_parent()
clk: divider: remove divider_ro_round_rate_parent()
clk: remove round_rate() clk ops
clk: composite: convert from round_rate() to determine_rate()
clk: test: remove references to clk_ops.round_rate

* clk-sai:
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support

* clk-cleanup:
clk: visconti: pll: initialize clk_init_data to zero
clk: xgene: Fix mapping leak in xgene_pllclk_init()
clk: Simplify clk_is_match()
clk: baikal-t1: Remove not-going-to-be-supported code for Baikal SoC
clk: mvebu: armada-37xx-periph: fix __iomem casts in structure init
clk: qoriq: avoid format string warning

Pull mtd fixes from Miquel Raynal:
"Besides an out-of-bound bug, this is about properly supporting Winbond
octal SPI NAND chips which use a specific pattern for stuffing more
address bits in some operations. This uses the spi-mem flag in SPI
NAND that was added to the spi-mem layer just before the merge window
through the spi tree"

* tag 'mtd/fixes-for-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: winbond: Fix ODTR write VCR on W35NxxJW
mtd: spinand: winbond: Set the packed page read flag to W35N02/04JW
mtd: spinand: Add support for packed read data ODTR commands
mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()

Currently, get_non_dying_memcg_start() and get_non_dying_memcg_end() both
evaluate cgroup_subsys_on_dfl(memory_cgrp_subsys) independently to
determine whether to acquire or release the RCU read lock.

However, the result of cgroup_subsys_on_dfl() can change dynamically at
runtime due to cgroup hierarchy rebinding (e.g., when the memory
controller is moved between cgroup v1 and v2 hierarchies). This can cause
the following warning:

=====================================
WARNING: bad unlock balance detected!
7.0.0-next-20260420+ #83 Tainted: G W
-------------------------------------
memcg-repro/270 is trying to release lock (rcu_read_lock) at:
[<ffffffff815f57f7>] rcu_read_unlock+0x17/0x60
but there are no more locks to release!

other info that might help us debug this:
1 lock held by memcg-repro/270:
#0: ffff888102fa2088 (vm_lock){++++}-{0:0}, at: do_user_addr_fault+0x285/0x880

stack backtrace:
CPU: 0 UID: 0 PID: 270 Comm: memcg-repro Tainted: G W 7.0.0-next-20260420+ #
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
<TASK>
? rcu_read_unlock+0x17/0x60
dump_stack_lvl+0x77/0xb0
print_unlock_imbalance_bug+0xe0/0xf0
? rcu_read_unlock+0x17/0x60
lock_release+0x21d/0x2a0
rcu_read_unlock+0x1c/0x60
do_pte_missing+0x233/0xb40
__handle_mm_fault+0x80e/0xcd0
handle_mm_fault+0x146/0x310
do_user_addr_fault+0x303/0x880
exc_page_fault+0x9b/0x270
asm_exc_page_fault+0x26/0x30
RIP: 0033:0x5590e4eb41ea
Code: 61 cc 66 0f 6f e0 66 0f 61 c2 66 0f db cd 66 0f 69 e2 66 0f 6f d0 66 0f 69 d4 66 0f 61 0
RSP: 002b:00007ffcad25f030 EFLAGS: 00010202
RAX: 00005590e4eb8010 RBX: 00007ffcad260f7d RCX: 00007f73c474d44d
RDX: 00005590e4eb80a0 RSI: 00005590e4eb503c RDI: 000000000000000f
RBP: 00005590e4eb70a0 R08: 0000000000000000 R09: 00007f73c483a680
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffcad25f180 R14: 00005590e4eb6dd8 R15: 00007f73c4869020
</TASK>
------------[ cut here ]------------

Fix this by explicitly tracking the RCU lock state, ensuring that
rcu_read_unlock() in get_non_dying_memcg_end() is strictly paired with the
lock acquisition, regardless of any runtime rebinding events.

Link: https://lore.kernel.org/20260429073105.44472-1-qi.zheng@linux.dev
Fixes: 8285917d6f38 ("mm: memcontrol: prepare for reparenting non-hierarchical stats")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ax_spi_fill_tx_fifo() can be called from ax_spi_irq() which is a hard
irq handler. Replace usleep_range(10, 10) with udelay(10) in atomic
context.

Fixes: e75a6b00ad79 ("spi: axiado: Add driver for Axiado SPI DB controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260428-axiado-v1-1-cd767500af72@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid an unclocked register access.

This issue was flagged by Sashiko when reviewing a controller
deregistration fix.

Fixes: 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support")
Cc: stable@vger.kernel.org # 6.7
Cc: Dhruva Gole <d-gole@ti.com>
Link: https://sashiko.dev/#/patchset/20260414134319.978196-1-johan%40kernel.org?part=2
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260421125354.1534871-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Section 8.3.4.5.5 of the NVMe Base Specification 2.1 describes what is
included in the Response Value (RVAL) hash and SC_C should be included.
Currently we are hardcoding 0 instead of using the correct SC_C value.

Update the host and target code to use the SC_C when calculating the
RVAL instead of using 0.

Fixes: e88a7595b57f2 ("nvme-tcp: request secure channel concatenation")
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Split the classic bitmap sysfs files into a common bitmap group with
the location attribute and a separate internal bitmap group for the
remaining files.

At the same time, convert bitmap operations from a single sysfs group
to a sysfs group array so backends can share part of their sysfs
layout while adding backend-specific attributes separately.

Switch the bitmap sysfs helpers to use sysfs_update_groups() for the
add and update path, and remove groups in reverse order so shared named
groups are unmerged before the last group removes the directory.

Also make bitmap operation lookup depend only on the currently selected
bitmap id matching the installed backend. This prepares the lookup path
for a later registered none backend.

Reviewed-by: Su Yue <glass.su@suse.com>
Link: https://lore.kernel.org/r/20260425024615.1696892-3-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>

Pull power utility updates from Len Brown:
"x86_energy_perf_policy:
- Initial SoC Slider support

turbostat:
- Display HT siblings in cpu# order
- Add Module-ID column
- Print Core-ID and APIC-ID in hex
- Fix misc bugs"

* tag 'power-utilities-2026.04.25' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power x86_energy_perf_policy: Version 2026.04.25
tools/power x86_energy_perf_policy.8: Document SoC Slider Options
tools/power x86_energy_perf_policy: Enhances SoC Slider related checks
tools/power turbostat: v2026.04.21
tools/power turbostat: Process HT siblings in CPU order
tools/power turbostat: Show module_id column
tools/power turbostat: Print core_id and apic_id in hex
tools/power turbostat: Cleanup print helper functions
tools/power turbostat: Fix --cpu-set 1 regression on HT systems
tools/power turbostat: Fix --cpu-set 0 regression on HT systems
tools/power turbostat: Fix unrecognized option '-P'
tools/power turbostat: Fix AMD RAPL regression on big systems
tools/power/x86: Add SOC slider and platform profile support

The fixdep hostprog may be built multiple times during a single build.
Once during the configuration phase and later during the regular phase.
As only the regular build phase respects CONFIG_WERROR / W=e, the
compiler flags might change between the phases, leading to rebuilds.

Example, the rebuilds will happen twice on each invocation of the build:

$ make allyesconfig prepare
make[1]: Entering directory '/tmp/deleteme'
HOSTCC scripts/basic/fixdep
#
# No change to .config
#
HOSTCC scripts/basic/fixdep
DESCEND objtool
INSTALL libsubcmd_headers
make[1]: Leaving directory '/tmp/deleteme'

Fix the compilation flags used for scripts/basic/ before
scripts/Makefile.warn is evaluated to stop CONFIG_WERROR / W=e
influencing the fixdep build to avoid the spurious rebuilds.

Fixes: 7ded7d37e5f5 ("scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260422-kbuild-scripts-basic-werror-v1-1-8c6912ff22e0@weissschuh.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>

* clk-tenstorrent:
clk: tenstorrent: Add Atlantis clock controller driver
reset: tenstorrent: Add reset controller for Atlantis
dt-bindings: clk: tenstorrent: Add tenstorrent,atlantis-prcm-rcpu

* clk-rockchip:
clk: rockchip: rk3568: Add PCIe pipe clock gates
clk: rockchip: Add clock controller for the RV1103B
dt-bindings: clock: rockchip: Add RV1103B CRU support

* clk-imx:
clk: imx8mq: Correct the CSI PHY sels
clk: vf610: Add support for the Ethernet switch clocks
dt-bindings: clock: vf610: Add definitions for MTIP L2 switch
dt-bindings: clock: vf610: Drop VF610_CLK_END define
clk: vf610: Move VF610_CLK_END define to clk-vf610 driver
clk: imx: imx8-acm: fix flags for acm clocks
clk: imx: imx6q: Fix device node reference leak in of_assigned_ldb_sels()
clk: imx: imx6q: Fix device node reference leak in pll6_bypassed()
clk: imx: fracn-gppll: Add 477.4MHz support
clk: imx: fracn-gppll: Add 333.333333 MHz support
clk: imx: pll14xx: Use unsigned format specifier
dt-bindings: clock: imx6q[ul]-clock: add optional clock enet[1]_ref_pad

* clk-allwinner:
clk: sunxi-ng: sun55i-a523-r: Add missing r-spi module clock

Pull Samsung SoC clock driver updates from Krzysztof Kozlowski:

- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Exynos850: Define missing clock for the APM mailbox

* tag 'samsung-clk-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: exynos850: Add APM-to-AP mailbox clock
dt-bindings: clock: exynos850: Add APM_AP MAILBOX clock
clk: samsung: Use %pe format to simplify
clk: samsung: pll: Fix possible truncation in a9fraco recalc rate
clk: samsung: exynosautov920: add block G3D clock support
dt-bindings: clock: exynosautov920: add G3D clock definitions
clk: samsung: gs101: harmonise symbol names (clock arrays)
clk: samsung: artpec-9: Add initial clock support for ARTPEC-9 SoC
clk: samsung: Add clock PLL support for ARTPEC-9 SoC
dt-bindings: clock: Add ARTPEC-9 clock controller

Pull Qualcomm clock driver updates from Bjorn Andersson:

- Global TCSR, RPMh, and display clock controller support for
the Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller
support for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Introduce various smaller display-related fixes across
Qualcomm Kaanapali, Milos, SC8280XP, SM4450, SM8250, and
SA8775P.
- Add missing GDSCs and fix retention flags for PCIe and USB
power domains on SC8180X.
- Enable runtime PM support to ensure performance votes are
propagated to CX on Qualcomm platforms.
- Mark the USB QTB clock as always-on on Qualcomm Hamoa, in
order to ensure the SMMU can work even when USB controller
device is sleeping.
- Qualcomm IPQ6018 and IPQ8074 support in the IPQ CMN PLL
driver
- MDSS resets for Qualcomm SC7180, SM6115, and SM6125, to allow
display subsystem driver to reset the hardware from the state
left by the bootloader.

* tag 'qcom-clk-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (67 commits)
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ8074
clk: qcom: ipq-cmn-pll: Add IPQ6018 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ6018
clk: qcom: gdsc: Fix error path on registration of multiple pm subdomains
dt-bindings: clock: qcom: Add missing power-domains property
clk: qcom: gcc-eliza: Enable FORCE_MEM_CORE_ON for UFS AXI PHY clock
clk: qcom: dispcc-sc7180: Add missing MDSS resets
...

Pull round_rate refactoring from Brian Masney:

Now that all of the dependencies across the tree have been merged into
Linus's tree, here's a small series with the following changes:

- Converts clk-composite from round_rate() to determine_rate()
- Removes the round_rate() clk op
- Removes the deprecated functions divider_round_rate(),
divider_round_rate_parent(), and divider_ro_round_rate_parent() since
these are just wrappers for the corresponding determine_rate variant

* tag 'clk-remove-deprecated-apis-v7.1' of ssh://github.com/masneyb/linux:
clk: divider: remove divider_round_rate() and divider_round_rate_parent()
clk: divider: remove divider_ro_round_rate_parent()
clk: remove round_rate() clk ops
clk: composite: convert from round_rate() to determine_rate()
clk: test: remove references to clk_ops.round_rate

The driver currently supports generating BCLK. There are systems which
require generation of MCLK instead. Register new MCLK clock and handle
clock-cells = <1> to differentiate between BCLK and MCLK. In case of a
legacy system with clock-cells = <0>, the driver behaves as before, i.e.
always returns BCLK.

Note that it is not possible re-use the current SAI audio driver to
generate MCLK and correctly enable and disable the MCLK.

If SAI (audio driver) is used to control the MCLK enablement, then MCLK
clock is not always enabled, and it is not necessarily enabled when the
codec may need the clock to be enabled. There is also no way for the
codec node to specify phandle to clock provider in DT, because the SAI
(audio driver) is not clock provider.

If SAI (clock driver) is used to control the MCLK enablement, then MCLK
clock is enabled when the codec needs the clock enabled, because the
codec is the clock consumer and the SAI (clock driver) is the clock
provider, and the codec driver can request the clock to be enabled when
needed. There is also the usual phandle to clock provider in DT, because
the SAI (clock driver) is clock provider.

Acked-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Sashiko reported the following:

> The struct clk_init_data init is declared on the stack without being
> fully zero-initialized. While fields like name, flags, parent_names,
> num_parents, and ops are explicitly assigned, the parent_data and
> parent_hws fields are left containing stack garbage.

clk_core_populate_parent_map() currently prefers the parent names over
the parent data and hws, so this isn't a problem at the moment. If that
ordering ever changed in the future, then this could lead to some
unexpected crashes. Let's just go ahead and make sure that the struct
clk_init_data is initialized to zero as a good practice.

Fixes: b4cbe606dc367 ("clk: visconti: Add support common clock driver and reset driver")
Link: https://sashiko.dev/#/patchset/20260326042317.122536-1-rosenp%40gmail.com
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>