Linux kernel ============ The Linux kernel is the core of any Linux operating system. It manages hardware, system resources, and provides the fundamental services for all other software. Quick Start ----------- * Report a bug: See Documentation/admin-guide/reporting-issues.rst * Get the latest kernel: https://kernel.org * Build the kernel: See Documentation/admin-guide/quickly-build-trimmed-linux.rst * Join the community: https://lore.kernel.org/ Essential Documentation ----------------------- All users should be familiar with: * Building requirements: Documentation/process/changes.rst * Code of Conduct: Documentation/process/code-of-conduct.rst * License: See COPYING Documentation can be built with make htmldocs or viewed online at: https://www.kernel.org/doc/html/latest/ Who Are You? ============ Find your role below: * New Kernel Developer - Getting started with kernel development * Academic Researcher - Studying kernel internals and architecture * Security Expert - Hardening and vulnerability analysis * Backport/Maintenance Engineer - Maintaining stable kernels * System Administrator - Configuring and troubleshooting * Maintainer - Leading subsystems and reviewing patches * Hardware Vendor - Writing drivers for new hardware * Distribution Maintainer - Packaging kernels for distros For Specific Users ================== New Kernel Developer -------------------- Welcome! Start your kernel development journey here: * Getting Started: Documentation/process/development-process.rst * Your First Patch: Documentation/process/submitting-patches.rst * Coding Style: Documentation/process/coding-style.rst * Build System: Documentation/kbuild/index.rst * Development Tools: Documentation/dev-tools/index.rst * Kernel Hacking Guide: Documentation/kernel-hacking/hacking.rst * Core APIs: Documentation/core-api/index.rst Academic Researcher ------------------- Explore the kernel's architecture and internals: * Researcher Guidelines: Documentation/process/researcher-guidelines.rst * Memory Management: Documentation/mm/index.rst * Scheduler: Documentation/scheduler/index.rst * Networking Stack: Documentation/networking/index.rst * Filesystems: Documentation/filesystems/index.rst * RCU (Read-Copy Update): Documentation/RCU/index.rst * Locking Primitives: Documentation/locking/index.rst * Power Management: Documentation/power/index.rst Security Expert --------------- Security documentation and hardening guides: * Security Documentation: Documentation/security/index.rst * LSM Development: Documentation/security/lsm-development.rst * Self Protection: Documentation/security/self-protection.rst * Reporting Vulnerabilities: Documentation/process/security-bugs.rst * CVE Procedures: Documentation/process/cve.rst * Embargoed Hardware Issues: Documentation/process/embargoed-hardware-issues.rst * Security Features: Documentation/userspace-api/seccomp_filter.rst Backport/Maintenance Engineer ----------------------------- Maintain and stabilize kernel versions: * Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst * Backporting Guide: Documentation/process/backporting.rst * Applying Patches: Documentation/process/applying-patches.rst * Subsystem Profile: Documentation/maintainer/maintainer-entry-profile.rst * Git for Maintainers: Documentation/maintainer/configure-git.rst System Administrator -------------------- Configure, tune, and troubleshoot Linux systems: * Admin Guide: Documentation/admin-guide/index.rst * Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst * Sysctl Tuning: Documentation/admin-guide/sysctl/index.rst * Tracing/Debugging: Documentation/trace/index.rst * Performance Security: Documentation/admin-guide/perf-security.rst * Hardware Monitoring: Documentation/hwmon/index.rst Maintainer ---------- Lead kernel subsystems and manage contributions: * Maintainer Handbook: Documentation/maintainer/index.rst * Pull Requests: Documentation/maintainer/pull-requests.rst * Managing Patches: Documentation/maintainer/modifying-patches.rst * Rebasing and Merging: Documentation/maintainer/rebasing-and-merging.rst * Development Process: Documentation/process/maintainer-handbooks.rst * Maintainer Entry Profile: Documentation/maintainer/maintainer-entry-profile.rst * Git Configuration: Documentation/maintainer/configure-git.rst Hardware Vendor --------------- Write drivers and support new hardware: * Driver API Guide: Documentation/driver-api/index.rst * Driver Model: Documentation/driver-api/driver-model/driver.rst * Device Drivers: Documentation/driver-api/infrastructure.rst * Bus Types: Documentation/driver-api/driver-model/bus.rst * Device Tree Bindings: Documentation/devicetree/bindings/ * Power Management: Documentation/driver-api/pm/index.rst * DMA API: Documentation/core-api/dma-api.rst Distribution Maintainer ----------------------- Package and distribute the kernel: * Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst * ABI Documentation: Documentation/ABI/README * Kernel Configuration: Documentation/kbuild/kconfig.rst * Module Signing: Documentation/admin-guide/module-signing.rst * Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst * Tainted Kernels: Documentation/admin-guide/tainted-kernels.rst Communication and Support ========================= * Mailing Lists: https://lore.kernel.org/ * IRC: #kernelnewbies on irc.oftc.net * Bugzilla: https://bugzilla.kernel.org/ * MAINTAINERS file: Lists subsystem maintainers and mailing lists * Email Clients: Documentation/process/email-clients.rst
Clone this repository
For self-hosted knots, clone URLs may differ based on your setup.
Download tar.gz
The timeout helpers (handle_se_timeout() and handle_gpi_timeout())
took a 'struct spi_message *msg' that was never used. Remove this
parameter and adjust the callers to simplify the interfaces.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-4-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently skips the abort sequence for target mode when serial
engine errors occur. This leads to improper error recovery as the serial
engine may remain in an undefined state without proper cleanup, potentially
causing subsequent operations to fail or behave unpredictably.
Fix this by ensuring the abort sequence and DMA reset always execute during
error recovery, as both are required for proper serial engine error
handling.
Co-developed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-3-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current implementation always allocates a host controller and sets the
target flag later when the "spi-slave" device tree property is present.
This approach is suboptimal as it doesn't utilize the dedicated allocation
functions designed for target mode.
Use devm_spi_alloc_target() when "spi-slave" device tree property is
present, otherwise use devm_spi_alloc_host(). This replaces the previous
approach of always allocating a host controller and setting target flag
later.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-2-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device property accessors.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://patch.msgid.link/20260203-spi-xilinx-v4-1-42f7c326061b@nexthop.ai
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a binding for the Faraday FTSSP010 SSP controller,
a pretty straight-forward syncronous serial port and SPI
controller.
The bindings are submitted separately because the one device
that has this is using it in a "nonstandard way" with regards
to the electronics, and does not make it possible to develop
or test a proper driver. However we want to be able to add
this resource to the device trees and it's not complex.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260203-gemini-ssp-bindings-v1-1-6d85c9c72371@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from David Lechner <dlechner@baylibre.com>:
This series is adding support for SPI controllers and peripherals that
have multiple SPI data lanes (data lanes being independent sets of
SDI/SDO lines, each with their own serializer/deserializer).
This series covers this specific use case:
+--------------+ +---------+
| SPI | | SPI |
| Controller | | ADC |
| | | |
| CS0 |--->| CS |
| SCLK |--->| SCLK |
| SDO |--->| SDI |
| SDI0 |<---| SDOA |
| SDI1 |<---| SDOB |
| SDI2 |<---| SDOC |
| SDI3 |<---| SDOD |
+--------------+ +--------+
The ADC is a simultaneous sampling ADC that can convert 4 samples at the
same time. It has 4 data output lines (SDOA-D) that each contain the
data of one of the 4 channels. So it requires a SPI controller with 4
separate deserializers in order to receive all of the information at the
same time.
This should also work for the use case in [1] as well. (Some of the
patches in this series were already submitted there). In that case the
SPI controller is used kind of like it is two separate SPI controllers,
each with its own chip select, clock, and data lines.
[1]: https://lore.kernel.org/linux-spi/20250616220054.3968946-1-sean.anderson@linux.dev/
The DT bindings are a fairly straight-forward mapping of which pins on
the peripheral are connected to which pins on the controller. The SPI
core code parses this and makes the information available to drivers.
When a peripheral driver sees that multiple data lanes are wired up, it
can chose to use them when sending messages.
The SPI message API is a bit higher-level than just specifying the
number of data lines for a SPI transfer though. I did some research on
other SPI controllers that have this feature. They tend to be the kind
meant for connecting to two flash memory chips at the same time but can
be used more generically as well. They generally have the option to
either use one lane at a time (Sean's use case), or can mirror the same
data on multiple lanes (no users of this yet) or can perform striping
of a single data FIFO/DMA stream to/from the two lanes (our use case).
For now, the API assumes that if you want to do mirror/striping, then
you want to use all available data lanes. Otherwise, it just uses the
first data lane for "normal" SPI transfers.
As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260127210541.4068379-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for SPI_MULTI_LANE_MODE_STRIPE to the AXI SPI engine driver.
The v2.0.0 version of the AXI SPI Engine IP core supports multiple
lanes. This can be used with SPI_MULTI_LANE_MODE_STRIPE to support
reading from simultaneous sampling ADCs that have a separate SDO line
for each analog channel. This allows reading all channels at the same
time to increase throughput.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260123-spi-add-multi-bus-support-v6-7-12af183c06eb@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from "Miquel Raynal (Schneider Electric)" <miquel.raynal@bootlin.com>:
This series adds support for the QSPI controller available on Renesas
RZ/N1S and RZ/N1D SoC. It has been tested with a custom board (see last
SPI patch for details), but has been tested by Wolfram (thank you!) on
the DB board.
Link: https://lore.kernel.org/linux-devicetree/20260116114852.52948-2-wsa+renesas@sang-engineering.com/
Adding support for this SoC required a few adaptations in the Cadence
QSPI driver. The bulk of the work is in the few last patches. Everything
else is just misc style fixes and improvements which bothered me while I
was wandering.
In order to support all constraints, I sometimes used a new quirk (for
the write protection feature and the "no indirect mode"), and sometimes
used the compatible directly. The ones I thought might not be RZ/N1
specific have been implemented under the form of a quirk, in order to
ease their reuse. The other adaptations, which I believe are more
Renesas specific, have been handled using the compatible. This is all
very arbitrary, and can be discussed.
Extend the ADI AXI SPI engine binding for multiple data lanes. This SPI
controller has a capability to read multiple data words at the same
time (e.g. for use with simultaneous sampling ADCs). The current FPGA
implementation can support up to 8 data lanes at a time (depending on a
compile-time configuration option).
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260123-spi-add-multi-bus-support-v6-6-12af183c06eb@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LPSPI driver currently does not support setting SPI bus clock
polarity and phase, add support for it.
It is important to configure correct initial clock polarity and phase
before the GPIO chipselect toggles, otherwise a chip attached to the
bus might recognize the first change of clock signal as the first
clock cycle and get confused.
In order to set up the correct polarity and phase on the clock signal
before the GPIO chipselects get configured by the SPI core, the
controller has to be briefly brought up in fsl_lpspi_prepare_message().
The fsl_lpspi_prepare_message() behaves like a zero-length transfer
which always uses PIO and never DMA, and which leaves the clock signal
in the correct state at the end of such transfer, which happens before
the GPIO chipselect toggles.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260127222353.1452003-1-marex@nabladev.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Bindings expect 4 to be the default value for cdns,fifo-width. Said
otherwise, if the property (which is not mandatory) is not provided, the
OS, in order to comply with the bindings, should not error out and take
4 as default value.
Comply with the bindings. This would have slighlty simplyfied my testing
if it had been implemented correctly in the first place, but in practice
it should have no impact on the existing boards using this controller, as
they all set cdns,fifo-width to 4 explicitly in their upstream DTS.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Tested-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://patch.msgid.link/20260122-schneider-6-19-rc1-qspi-v4-13-f9c21419a3e6@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new page to Documentation/spi/ describing how multi-lane SPI
support works. This is uncommon functionality so it deserves its own
documentation page.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260123-spi-add-multi-bus-support-v6-5-12af183c06eb@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_platform_ioremap_resource() prints an error message depending on
the actual error. The caller doesn't need to repeat that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095748.4156926-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas RZ/N1 QSPI controllers embed the Cadence IP with some
modifications. For instance, they feature a write protection of the
direct mapping at the controller level, with this feature all data
writes to the AHB region are aborted.
Despite the fact that the flag setting write protection is disabled by
default, Bootloaders may (and actually do) set it, so mark this feature
as being available with a specific flag to, if applicable, make sure it
is disabled.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Tested-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://patch.msgid.link/20260122-schneider-6-19-rc1-qspi-v4-12-f9c21419a3e6@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new multi_lane_mode field to struct spi_transfer to allow
peripherals that support multiple SPI lanes to be used with a single
SPI controller.
This requires both the peripheral and the controller to have multiple
serializers connected to separate data lanes. It could also be used with
a single controller and multiple peripherals that are functioning as a
single logical device (similar to parallel memories).
Acked-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260123-spi-add-multi-bus-support-v6-4-12af183c06eb@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>